StryfeS13
06-28-2011, 09:18 PM
Text me @ 559-765-8363 please if you are interested or have any questions.
Yes, I'm aware the exterior is ugly and needs paint blah blah whatever. I don't care!!! I didn't drive this car for the looks. I did the motor first and never got around to the cosmetics. So, sorry.
I need money to fund my new project, so I'm selling this. I want $4000 firm. That's a great price in my opinion. I will not take any more, or any less than 4,000.
Motor has about 10K miles on it.
Chassis has around 180K
Mods:
Engine:
Compression is 165 PSI across the board
Bored .020" over
Supertech 8.6:1 Forged Pistons
Supertech Rings
Eagle Forged Rods
ACL Bearings
ARP Main Studs
ARP Head Studs
Fel-Pro High Pressure Headgasket
Ported/Polished/Port matched cylinder head
All new gaskets
New valve seals
ISIS Megaphone MBSE Exhaust - Extremely quiet
NOOO emissions whatsoever
Exedy clutch (needs to be changed if you plan on running more boost)
ETC. legit!
Turbo Setup:
Sunpro boost gauge (not hooked up)
Glowshift Oil PSI Gauge
JGS Vacuum Block with 1/8 fittings
CXRacing T3/T4 top mount manifold (the new one)
Custom downpipe
Holset H1C turbo
CXRacing FMIC kit
Freddy BOV
EFISpecialist Tune
Tomei 555CC injectors
Z32 MAF
Z1 Motorsports (http://zilvia.net/f/) stainless steel feed line
Walbro 255 LPH fuelpump (http://zilvia.net/f/)
Wheels:
Volk Evolution 3? I think lol
The bad:
- Downpipe hits floorboard and vibrates while decelerating.
- TINYYY little exhaust leak.
- Cracked windshield, very minimal. It's not spidered or anything.
- Needs a clutch fan. My cheapy e-fan is going out and it gets HOT fast.
- Has a miss at idle and sometimes dies at lights, due to atmospheric bov on a draw through setup.
- Small oil leak at the pan. REAL small. Like a it'll lose a quart probably every 6 months. So..that's not even a big deal since you should be changing the oil anyway. Lol.
Videos:
Small pull, EWG sound, 2nd gear:
YouTube - ‪KA24DET S13 Hatch For Sale‬‏ (http://www.youtube.com/watch?v=UTPRdtJzFGc)
Motor/Exhaust:
YouTube - ‪KA24DET Hatch For Sale‬‏ (http://www.youtube.com/watch?v=dSr9P7wbZZ8)
Walk Around:
YouTube - ‪240SX for sale KA24DET Fully Built‬‏ (http://www.youtube.com/watch?v=Uq-VVuh8y5Y)
Pictures:
http://i1177.photobucket.com/albums/x343/Sickfire/photo.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/photo8.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/photo6.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4350Small.jpg
http://i1099.photobucket.com/albums/g399/indobingo/turbo1.jpg
http://i34.tinypic.com/2s0kzr7.jpg
http://i34.tinypic.com/2dsprah.jpg
http://i35.tinypic.com/vct55j.jpg
http://i37.tinypic.com/2wrnrz8.jpg
http://i36.tinypic.com/5mk0g0.jpg
http://i33.tinypic.com/2j26c6v.jpg
http://i1099.photobucket.com/albums/g399/indobingo/turbo4.jpg
Yes, I'm aware the exterior is ugly and needs paint blah blah whatever. I don't care!!! I didn't drive this car for the looks. I did the motor first and never got around to the cosmetics. So, sorry.
I need money to fund my new project, so I'm selling this. I want $4000 firm. That's a great price in my opinion. I will not take any more, or any less than 4,000.
Motor has about 10K miles on it.
Chassis has around 180K
Mods:
Engine:
Compression is 165 PSI across the board
Bored .020" over
Supertech 8.6:1 Forged Pistons
Supertech Rings
Eagle Forged Rods
ACL Bearings
ARP Main Studs
ARP Head Studs
Fel-Pro High Pressure Headgasket
Ported/Polished/Port matched cylinder head
All new gaskets
New valve seals
ISIS Megaphone MBSE Exhaust - Extremely quiet
NOOO emissions whatsoever
Exedy clutch (needs to be changed if you plan on running more boost)
ETC. legit!
Turbo Setup:
Sunpro boost gauge (not hooked up)
Glowshift Oil PSI Gauge
JGS Vacuum Block with 1/8 fittings
CXRacing T3/T4 top mount manifold (the new one)
Custom downpipe
Holset H1C turbo
CXRacing FMIC kit
Freddy BOV
EFISpecialist Tune
Tomei 555CC injectors
Z32 MAF
Z1 Motorsports (http://zilvia.net/f/) stainless steel feed line
Walbro 255 LPH fuelpump (http://zilvia.net/f/)
Wheels:
Volk Evolution 3? I think lol
The bad:
- Downpipe hits floorboard and vibrates while decelerating.
- TINYYY little exhaust leak.
- Cracked windshield, very minimal. It's not spidered or anything.
- Needs a clutch fan. My cheapy e-fan is going out and it gets HOT fast.
- Has a miss at idle and sometimes dies at lights, due to atmospheric bov on a draw through setup.
- Small oil leak at the pan. REAL small. Like a it'll lose a quart probably every 6 months. So..that's not even a big deal since you should be changing the oil anyway. Lol.
Videos:
Small pull, EWG sound, 2nd gear:
YouTube - ‪KA24DET S13 Hatch For Sale‬‏ (http://www.youtube.com/watch?v=UTPRdtJzFGc)
Motor/Exhaust:
YouTube - ‪KA24DET Hatch For Sale‬‏ (http://www.youtube.com/watch?v=dSr9P7wbZZ8)
Walk Around:
YouTube - ‪240SX for sale KA24DET Fully Built‬‏ (http://www.youtube.com/watch?v=Uq-VVuh8y5Y)
Pictures:
http://i1177.photobucket.com/albums/x343/Sickfire/photo.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/photo8.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/photo6.jpg
http://i1177.photobucket.com/albums/x343/Sickfire/DSCF4350Small.jpg
http://i1099.photobucket.com/albums/g399/indobingo/turbo1.jpg
http://i34.tinypic.com/2s0kzr7.jpg
http://i34.tinypic.com/2dsprah.jpg
http://i35.tinypic.com/vct55j.jpg
http://i37.tinypic.com/2wrnrz8.jpg
http://i36.tinypic.com/5mk0g0.jpg
http://i33.tinypic.com/2j26c6v.jpg
http://i1099.photobucket.com/albums/g399/indobingo/turbo4.jpg