A lil help guys involving Cams with my Gt28R Turbo

[Creeper]

Im building my Sr20 with a Gt2871R turbo, I was planning to buy HKS Cams 264/264, lift 12mm but I came upon some Toda Racing Cams 264/264 lift 10.5mm for hella cheap. I dont know which ones to get, which ones are better? I was going with the HKS since my buddy of mines has a pair. Has any of you tried these cams out?

[RocketOgre]

While I'm sure both cams would perform reasonably well for you I don't have any experience with either personally. I would however suggest going another route. Those cams are fairly aggressive for our turbo motors and with a relatively conservative turbo like the 2871 you'd really have too much cam with a 264. It'll pull hard up top but won't be into it's power range until a while after the turbo hits full boost. If it has to be one of the 2 I'd say Toda off the cuff just because it's smaller lift profile no need to push the stock valvetrain harder than you need, but I'd recommend just plain a more mild cam. Poncams are amazing with 2871s for an example.

[brndck]

jwt are the best.

but i've got some brand new brian crower 264/264 for sale.

jus sayin.....