s13 ka-t massive partout. AMS built engine.

[spartanmisfit]

UPDATED!!


Some things have come up in my life and I had to make some very difficult decisions. So it’s time to part out my baby. Most of the parts are pretty new and have low miles, especially the motor. Unfortunately I have horrible luck with computers and just crashed another so I’m using my sisters so I will have to do most of my updating from my phone.

I will begin taking my car apart sometime this week when I get out of work at a normal time. I really do not want to ship the engine, (nor would I even know where to begin) or large parts but will if the money is right. I will drive almost anywhere in Michigan to meet with a buyer but please do not waste my time. Time is money yo. The entire car is for sale so if I don’t have something listed just ask because I’m sure I’m going to forget a lot of things.

Everything is obo and I am in no hurry to sell so I will be looking for the BEST offers.
Add shipping n paypal fees to prices.

Engine:
93 Ka24de
AMS Arias 8.8:1 pistons
AMS spartsman rods
Cometic head gasket
ARP rod bolts
ARP head studs
ARP main studs
3 angle valve job
I will only sell the engine together. ( parts listed above)
Transmission and custom carbon Kevlar 6 puck clutch and flywheel by Ft. Wayne Clutch.
With trans 2750 w/o trans 2500
Engine has under 4,000 miles and was built and broken in by AMS!!!!!!!
Will ship if buyer pays for shipping


Neukin welded diff

Hks boost controller - complete $200 SOLD

Jim wolf Tuned ecu for 550cc injectors and 8.8:1 compression pistons. $300

Custom badass manifold. $400 SOLD
Sti 550cc injectors fine tuned and flow tested by dwerks. I have the paperwork for them somewhere. Comes with the clips and pigtails. $250
Fuelab Fuel Press. Regulator $100 SOLD
Ebay oil catch can $40
Hks ssqv black bov. $175
Z32 Maf $100 SOLD
Aluminum radiator $100
Dual electric fans $150
Golden Eagle Vaccum block $30
Innovate lc-1 wideband complete and zero miles just in while ran the car 3 times for 5 mins. $175
Brake master cylinder heat shield $45 SOLD
Custom exhaust with apexi muffler $150
Ebay fmic and piping. Fmic is in rough shape but it works. $100
Megan j-pipe. Practically brand new. 5 bolt $100

Garrett t3 60-1, 70 ar antisurge compressor housing, 5 bolt, stage 3 turbine wheel, good for 585 hp. $800

Tial 38mm wastegate. $175 SOLD
And all the little random parts are for sale shoot me some reasonable offers.

Everything else:
Fully adjustable coilovers. Might sound crazy but I’m not sure what company they are. I will know when I remove them. They’re in great shape. Came with the car. SOLD
Sparco Torino 2 seat. $150
Xxr staggered wheels. One wheel has some powdercoat damage but just needs to be re-powdercoated. No curbrash. I’ll throw in my spacers.
SOLD!

NRG deep dish steering wheel and quick release setup SOLD

Rear bumper sprayed primered flat black $150


S14 rear upper leather seat. $50

All of the interior is up for grabs!!!

Chasis is for sale and whatever else you see. I have to grab my camera from my girls sister, so until then all I have is cell phone shots. Absolutely everything is for sale.

http://i302.photobucket.com/albums/nn108/spartanmisfit/75c90173.jpg


http://i302.photobucket.com/albums/nn108/spartanmisfit/88d6bb93.jpg


http://i302.photobucket.com/albums/nn108/spartanmisfit/a77caca5.jpg


http://i302.photobucket.com/albums/nn108/spartanmisfit/f82fc24a.jpg


http://i302.photobucket.com/albums/nn108/spartanmisfit/68871160.jpg




http://i302.photobucket.com/albums/nn108/spartanmisfit/10681bb1.jpg

I know the turbos upside down. I just put it up there for pics.

http://i302.photobucket.com/albums/nn108/spartanmisfit/c1be0be9.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/870ed093.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/0c8b454e.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/677f4630.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/3311885e.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/2eb0f9c2.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/7864decd.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/f6fe2504.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/89eafa64.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/59279cf7.jpg

[whaapshh]

How much for the rear bumper shipped to Nj?

[all shal perrish]

do you by chance happen to have cams in that motor other than stock cams? if so what cams and how much shipped to 99019

pm me

[KOME]

Can the JW ECU be re-tuned if i'm not doing internal work? Just valve train.


How much for the side skirts too?

Idk what offer to make i'm not sure what either of them cost.


Also nice R35 :]

[ka-turbo]

that turbo looks like its practically touching the brake line....and the blow off valve looks like it doesnt have room......do u have anymore and better pics of the exhaust manifold wit the turbo on.....

[spartanmisfit]

I have to run to fedex today to see how much shipping will cost for the bumpers and side skirts today.
Yes the ecu can be re-tuned but they charge 100 bucks ill bundle the side skirts and ecu for 450 plus shipping.
Stock cams buddy
The turbo in those pics is not installed and has never been installed in my car. I can take pics of how it would fit sometime today. The bov fits but it is a tight squeeze.

If anyone wants pics i can take pics after work everyday just text me at 5179741302


http://i302.photobucket.com/albums/nn108/spartanmisfit/6dfacbe4.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/4f019781.jpg

[josephin510]

Hard times with a GTR....:mepoke: glws alot of legit parts.

[spartanmisfit]

Lol yea the gtrs my best friends but i think i drive it more than him. Im not struggling, i just got married and my wifes car broke down so i gave her my jeep n bla bla

[ATLspeed]

"Custom Badass Manifold"

!!SOLD!!

[DJDANGER24]

Better pics of the wastegate and what psi spring please?
Also, what ECV is the HKS unit? EVC 4? 5?

[Boltarsenal42]

What condition is the Sparco seat in?

[spartanmisfit]

Ill put up some pics of the wastegate and seat in a couple hours. The seat is about 6.5 out of 10. Manifold and front bumper sold.

[future]

How much for the gtr shippped to 92336

[spartanmisfit]

Gtrs not for sale lol

http://i302.photobucket.com/albums/nn108/spartanmisfit/02c4ea47.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/99006bb5.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/2d6e1804.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/c38e25a9.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/72db0172.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/a42cda74.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/72015e71.jpg

[Boltarsenal42]

price plus shipping to 45322?

[spartanmisfit]

Ill find a box for the sparco tomorrow. Im guessing it will cost around 100 bucks to ship.
Fpr, front bumper and front windshield sold.
Wastegate and boost controller pending sale.
Nrg quick release setup pending sale
http://i302.photobucket.com/albums/nn108/spartanmisfit/f55933b7.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/0edf3fa9.jpg

[MeloYelo]

Did this car have power steering? If so, I'll take your P/S lines.... PM me priced shipped to 31903 please.

[spartanmisfit]

Yes it did have powersteering. I forgot to mention i also have a walboro 255lph fuel pump

[Billiam151]

interested in the sparco seat... r u shipping? if so what would the cost be for the seat to zipcode 45322

[spartanmisfit]

I will ship but i need to find a box or way to ship it this afternoon

[sldwayz1]

Willing to part with the wheel spacers what mm?

[Billiam151]

I hear that using Greyhound bus lines to ship is the cheapest and I have a terminal close.. that would include the rail correct?

[spartanmisfit]

I never got the rail for the seat. I just bought the seat a couple weeks ago. I can look into greyhound but finding a box isnt going very well so far but ill find one

[h11m1vn]

what kind (brand) of aluminum radiator?

[spartanmisfit]

A local shop made the radiator.

More pics!!!

http://i302.photobucket.com/albums/nn108/spartanmisfit/46656b16.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/6eedf433.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/312ee370.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/013f67e0.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/7b787ab5.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/7da93299.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/d8d2dfe8.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/c0a5bdfb.jpg

http://i302.photobucket.com/albums/nn108/spartanmisfit/c8376354.jpg

[nep]

pics of bmc shield?

[all shal perrish]

i would like a price quote on shipping the WHOLE motor to 99019

ive got money in hand btw

[spartanmisfit]

Ok i just looked up shipping the block and head across the country. With no lift gate and 5-6 day shipping is 380 bucks.

Also i can ship the seat anywhere for 275 shipped n pay pald

[ATLspeed]

free bump

*Got the turbo manifold today, Thanks!

BUY HIS STUFF!!!

[non-stop rps13]

NRG deep dish steering wheel and quick release setup $200 shipped to 93960?

[spartanmisfit]

I just shipped the nrg setup yesterday

[HPKMotorsports3]

Do you have the headlight shroud/cover and the tins that hold and let you angle then sealed beams???

[silva.240]

i know the gtr isn't for sale, but how about a trade? i have a custom 2010 c63 with a weistec supercharger. it is faster than the gtr ... let me know.

[spartanmisfit]

The only piece im missing is the passenger side headlight shroud but i have the rest.
Ill ask him about the trade but i highly doubt he wants to trade it. Pm me or just post some pics on here tho just in case

[XSboosted10]

Ill take the coilovers!!!!!!!

[spartanmisfit]

Coilovers sold

[spartanmisfit]

Wheels are sold