traxx07
06-25-2011, 10:18 PM
Ok so followed the instructions and have a few questions.
1. Is the 2 wire plug used? I saw on one of the write ups it's not used and on the other it says to use only 1 wire from it.
2. There are 3 yellow wires coming from the yellow plug I know one is used and that is the #12 pin. The others don't look like they get used. Am I right? They dont have a pin in the FSM.
3. "green ~ blue and yellow wire from blk plug and yellow plug" What does that mean?
4. Anyone have a list of the wires not used?
5. Wires I have left over....
Yellow Plug:
-Purple
-(2) Yellow
-Red/Yellow
-Yellow/Green
-Black/Yellow
White Plug:
-Red/White
From the s13 part I just have the Red/Blue wire from the middle white plug left.
Thanks in advanced and if you need pics I can get them just please help! I have a 91 5spd nx1600 cluster and harness so it should be just like the DIY.
1. Is the 2 wire plug used? I saw on one of the write ups it's not used and on the other it says to use only 1 wire from it.
2. There are 3 yellow wires coming from the yellow plug I know one is used and that is the #12 pin. The others don't look like they get used. Am I right? They dont have a pin in the FSM.
3. "green ~ blue and yellow wire from blk plug and yellow plug" What does that mean?
4. Anyone have a list of the wires not used?
5. Wires I have left over....
Yellow Plug:
-Purple
-(2) Yellow
-Red/Yellow
-Yellow/Green
-Black/Yellow
White Plug:
-Red/White
From the s13 part I just have the Red/Blue wire from the middle white plug left.
Thanks in advanced and if you need pics I can get them just please help! I have a 91 5spd nx1600 cluster and harness so it should be just like the DIY.