help gt2871r

[joshuaaaron]

so here's the deal. i'm new to this whole forum thing. i recently bought a gt2871r .64 to install on my s13 sr20det. this is gonna make me sound stupid but i know i have to modify my hot pipe to accommodate the compressor housing. i already have a z32 mafs i'll wire in during install and a jgy fuel rail with 750cc injectors. already installed a walbro 255lph fuel pump.

what do i need to know/have to make this turbo swap go as easily as i hope? like for instance what lines do i use for the oil pick-up and return? i was told the coolant lines will match up to my s13 block.

any help is appreciated and ill return the favor any way possible.

[fukusdm01]

I believe you need a 0.035" oil restrictor for the oil feed. And for the compressor outlet you dont have to modify your hotpipe if you dont want, you can just buy the adapter kit from frsport here ---> Circuit Sports T28 Turbo Upgrade Reclocked Adapters (http://www.frsport.com/Circuit-Sports-T28-Turbo-Upgrade-Reclocked-Adapters_p_7867.html)

Also, do you have a tune?

[joshuaaaron]

i have an apexi afc neo to get me to the tuning shop an hour away. and alright thanks man.

[codyace]

Hi Josh, check out the 2871r thread for more info and help!