Bumnah
06-22-2011, 09:33 PM
Custom intake for the later model s13 front bumper.
Bolt these to the oem intakes ducts on the bumper, and run the hoses to an oil cooler or your brakes, or anything else.
These are one off items. I have 2 pairs, I am looking to sell just one pair for the time being.
These can used in any application you can think of. The material they are made of is similar to nylon 6. They were made on a selective laser sintering machine.
Here is a video of a laser sintering machine:
YouTube - ‪Laser Sintering Process (SLS)‬‏ (http://youtu.be/SVkUwqzjGJY)
Each intake has two 3" outlets. You can run each 3" outlet to whatever you like. There is a center line dividing the 3" outlets. There is also a line running around the out side of the intake to help keep the hoses attached. Quality, one off piece. Cost of manufacturing an item like this is significantly higher than the sale price. This is for a pair of intakes, so you get it for both the left and right side. One side was created, and then mirrored for the opposite side. Never used, never tested, no warranty expressed or implied.
$250 shipped in the 48 states.
http://www.bumnah.com/ducts/intake01.jpg
http://www.bumnah.com/ducts/intake02.jpg
http://www.bumnah.com/ducts/intake03.jpg
http://www.bumnah.com/ducts/intake04.jpg
http://www.bumnah.com/ducts/intake05.jpg
http://www.bumnah.com/ducts/intake06.jpg
Bolt these to the oem intakes ducts on the bumper, and run the hoses to an oil cooler or your brakes, or anything else.
These are one off items. I have 2 pairs, I am looking to sell just one pair for the time being.
These can used in any application you can think of. The material they are made of is similar to nylon 6. They were made on a selective laser sintering machine.
Here is a video of a laser sintering machine:
YouTube - ‪Laser Sintering Process (SLS)‬‏ (http://youtu.be/SVkUwqzjGJY)
Each intake has two 3" outlets. You can run each 3" outlet to whatever you like. There is a center line dividing the 3" outlets. There is also a line running around the out side of the intake to help keep the hoses attached. Quality, one off piece. Cost of manufacturing an item like this is significantly higher than the sale price. This is for a pair of intakes, so you get it for both the left and right side. One side was created, and then mirrored for the opposite side. Never used, never tested, no warranty expressed or implied.
$250 shipped in the 48 states.
http://www.bumnah.com/ducts/intake01.jpg
http://www.bumnah.com/ducts/intake02.jpg
http://www.bumnah.com/ducts/intake03.jpg
http://www.bumnah.com/ducts/intake04.jpg
http://www.bumnah.com/ducts/intake05.jpg
http://www.bumnah.com/ducts/intake06.jpg