Removing Chassis Wiring with condenser in place

[HIGHFIVEBETA]

Is this possible? I can't seem to fit the wiring and the relay through the front. The condenser looks like it pinches the wiring pretty good in there. Any suggestions/advice? I want to remove this harness already!

[Om1kron]

If you're trying to remove the rear chassis wiring fuel pump and all that jazz it can be disconnected from the driver side smj without removing the dash. But impossible to remove anything else without removing the dash since it's ziptied and tabbed to your upper firewall behind the dash bar.

http://img.photobucket.com/albums/v46/om1kron/My%20Cars/1996%20240sx%20Kouki/2009-02-13%20-%20more%20wiring/2009-02-13010.jpg

[HIGHFIVEBETA]

I was talking about the front chassis harness. The one that goes to the headlights and the fuse box. But the solution to this was loosening the condenser and radiator and pushing them back to make space so the fuses and other wiring have space to go through and be taken out.

BTW your build thread is a GREAT reference. Im cleaning up my wiring and relocating the fusebox somewhere in the interior