// SR20DET Parts Galore - LOOK Inside//

[JDS Performance]

[/center]// SR20DET Parts Galore - LOOK Inside//

Email > [email protected] < Paypal send payment as a personal gift or pay the 3% fee - add in note what your paying for as well as your shipping address.

Concord, NC 28205

Email/PM me offers or to get shipping quotes / I need your City/State/Zip

All prices do not include shipping

__________________________________________________ ____________________________________________

FS: SR20 JE 87mm / 3.425in .040 over stock (86mm / 3.386in) - 8.5:1 CP Pistons

FYI Stock SR20 pistons are - 86mm / 3.386in with a 8.5:1 CP

Will work on any SR20

Used but in perfect working condition

Rings are in good shape but will need to be file fit to your block a new set can be had for $100 or less - if needed

1 piston has been banged around but nothing affects its performance

Another piston has a few scars on the skirt but again will not affect the performance

The carbon build up (not bad at all) will clean right off with whatever way you use - if you dont know any ways to remove it google search there are tons of ways to do it - I just have not had time to clean them.

These are $600.00+ new

$350.00

Download the Piston spec sheet: http://www.jepistons.com/PDFs/TechCorner/S..._instrc4032.pdf (http://www.jepistons.com/PDFs/TechCorner/SCPDrawings/piston_instrc4032.pdf)

In case you cant read the micrometer - in the first pic - it reads 3.4245 - all pistons are in the range of 3.4245 - 3.425 - this is measuring from bottom of skirt up 1/2in in an 80deg. garage

http://i82.photobucket.com/albums/j274/joshds25/DSCF0002-11.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0006-12.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0009-10.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0010-8.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0014-10.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0018-6.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0019-3.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0020-6.jpg

__________________________________________________ ____________________________________________

SR20DET Greddy Oil Pan

Painted black - can be removed easily

Used on a rebuild that made it to idle and then the whole project was parted out.

I was going to use it on my project SR but need $ of other things

$285.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0002-12.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0001-11.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-15.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0004-7.jpg

__________________________________________________ ____________________________________________

SR20DET Redtop Valve Cover

Normal wear and tear - nothing major - great for a core on powder coating or use it as-is.

No hardware - valve cover only.

$75.00

If you want a coil pack cover add $25.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-14.jpg

__________________________________________________ ____________________________________________

FS SR20DET GREDDY / TRUST / GREX METAL HEAD GASKET

Brand New in Box

I was going to use it on m SR build but need the money for more important things

Part # 13521183
88 1.4mm

This will work on any bore size 88mm and smaller

FYI - Stock SR - Bore & Stroke 86mm x 86mm

$265.00 new from Greddy

http://www.greddy.com/products/engine/meta...er:make:Nissan/ (http://www.greddy.com/products/engine/metal-head-gaskets/filter:make:Nissan/)
http://www.trust-power.com/06new/e2004_09/041101_greddy.html

$215.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-12.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0010-6.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0014-8.jpg

__________________________________________________ ____________________________________________

SR20DET Front timing cover with oil pump

$70.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0032-2.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0035.jpg

__________________________________________________ ____________________________________________


SR20DET Ignitor - came off a redtop harness

$55.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0027-2.jpg

__________________________________________________ ____________________________________________

SR20DET tranny to motor dust plate

$45.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-11.jpg

__________________________________________________ ____________________________________________

SR20DET Flywheel - off a redtop needs resurface

$25.00 or $75.00 resurfaced

http://i82.photobucket.com/albums/j274/joshds25/DSCF0004-5.jpg

__________________________________________________ ____________________________________________

SR20DET 370cc injectors

$100.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0014-3.jpg
__________________________________________________ ____________________________________________

S13 Redtop SR20DET A/C Bracket

$45.00

http://i82.photobucket.com/albums/j274/joshds25/S13SRAC.jpg

__________________________________________________ ____________________________________________

S13 SR20DET Fuel Rail w/ caps - no injectors or FPR

$30.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0023-5.jpg

__________________________________________________ ____________________________________________


S13 SR20DET T25 Turbo Lines

$10.00 each or both for $15.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0033-2.jpg

__________________________________________________ ____________________________________________

S13 SR20DET Alternator Bracket - No tensioner bolt/nut

$30.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0006-14.jpg

__________________________________________________ ____________________________________________

SR20DET Brand New Clutch Bolts (missing 1)

$15.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0012-8.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0011-5.jpg

__________________________________________________ ____________________________________________

S13 SR20DET Throttle Bodies with Auto TPS

$25.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-16.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0002-13.jpg

__________________________________________________ ____________________________________________

SR20DET Stock Crank, P/S, Alt. Pullies

Crank has small chip on A/C side - Hurts nothing - Only cosmetic

$50.00

http://i82.photobucket.com/albums/j274/joshds25/srcrankpulley.jpg

__________________________________________________ ____________________________________________


S13 SR20DET Intake Manifold (Bare) - I have 2

$30.00

http://i82.photobucket.com/albums/j274/joshds25/SDC13133.jpg
http://i82.photobucket.com/albums/j274/joshds25/SDC13134.jpg

__________________________________________________ ____________________________________________

SR20DET Timing Chain Tensioner

$55.00

http://i82.photobucket.com/albums/j274/joshds25/SDC13207.jpg

__________________________________________________ ____________________________________________

SR20DET T25 I/C Hot Pipe

$20.00

http://i82.photobucket.com/albums/j274/joshds25/SDC13212.jpg

__________________________________________________ ____________________________________________

SR20DET Black Coil Pack Cover

$35.00

http://i82.photobucket.com/albums/j274/joshds25/SDC13171.jpg

[kauaiboy808]

Bump for legit seller.

[sr20doc]

How much for the oil pan shipped to 46123?
Thanks

[JDS Performance]

How much for the oil pan shipped to 46123?
Thanks

Hows $295.00 sound? I will ship it 2nd day air too!
[email protected] - send as a gift or add the 4% fee

[JDS Performance]

List is updated

[Driftbandit]

Would you seperate the stock pulleys? I just need the P/S pulley, If so how does $20 shipped to 92374 sound?

[JDS Performance]

Would you seperate the stock pulleys? I just need the P/S pulley, If so how does $20 shipped to 92374 sound?

$25 and its a deal - [email protected] - send as a gift or add the 4% fee
It will ship tomorrow and I will send you the tracking #.

[Driftbandit]

I'll just find a local deal. Thanks anyway man.

[chillfactor0988]

Hey can you do 45 shipped on the ignitor chip if you still have it to 29485? Thanks!

[JDS Performance]

Hey can you do 45 shipped on the ignitor chip if you still have it to 29485? Thanks!

Yeah thats cool - [email protected] - send as a gift or add the 4% fee

[chillfactor0988]

Sounds like a plan, I'm out right now but I'll send the payment as soon as I get home to my computer

[94vert]

hey i will take the ac bracket

[JDS Performance]

hey i will take the ac bracket

$55 shipped

[email protected] - send as a gift or add the 4% fee