FS/FT shell to shell

[killer240]

hey my shell is for sale or trade me a stock one.
i have so much $h!t goin on right now and i thought this would help me out.

i have papers, plates and all that. its just in none operation. clean title! was 5spd
welded S15 core support already and painted engine bay, eh its not fresh anymore but it still look good http://209.85.48.12/html/emoticons/cool.gif
i also welded the antena hole, forgot to paint it so its kinda getting rust but no biggie, just grind it off and do some fiberglass to make it even.
this has no sunroof, power windows(not converted) i actually put in a new interior harness. comes with new aluminum steering bushing, new rack and pinion bushing, new rear lower control arms, free strut bar, sound deadening on the firewall and driver floor, welded diff, stock driveshaft, vertex style rear bumper, pop up hood(if you want it), rear seat is there, healiner board(i took off the cloth cuz i was going to recovered it), interior pieces, the car is primered black.
dashboard is there, door panels, center console(a lil dirty) glove box recovered and arm rest + cushion i made for it(nothing fancy). sitting on steelies 4 lugs stock suspension. no brakes. if you want i can include a full set up of Z32 brake 26mm ones for a lil extra $ and i can also include black leather 300zx power seats for a lil extra or S14. i still have the pop up light assembly so you an have that too, im forgetting more so ill just keep adding stuff i remember

the trunk cable is there but the gas door lock broke. common problem for 240's
trunk, doors, ignition uses one key and glove box has its own key. pretty cool eh? http://209.85.48.12/html/emoticons/laugh.gif

6 Z32 rims comes along with it too if you buy it with the Z32 brake setup and z32 rear n/a hubs, uprights with lower control arms. this means i take the brand new oem S13 rear lower arms

i also have extra Z32 n/a rear 5 lug hubs for sale
Z32 uprights and lower arms.

the hatch doesnt have any holes at all

i need to take some pics right now, so give me an hour and pics will be up.


YOU NEED TO BRING YOUR OWN FLCA.


http://farm6.static.flickr.com/5139/5419270017_c9915fea98.jpg (http://www.flickr.com/photos/[email protected]/5419270017/)
IMG_2653 (http://www.flickr.com/photos/[email protected]/5419270017/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr

http://farm6.static.flickr.com/5055/5419270023_e0f86d04f7.jpg (http://www.flickr.com/photos/[email protected]/5419270023/)
IMG_2661 (http://www.flickr.com/photos/[email protected]/5419270023/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
http://farm6.static.flickr.com/5166/5325039043_4beaa54df5.jpg (http://www.flickr.com/photos/[email protected]/5325039043/)
IMG_2592 (http://www.flickr.com/photos/[email protected]/5325039043/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr


here you can see where i relocated the fusebox. you can also see the FMIC pipe holes.(i might include some pipes for you, 2.5 16gauge aluminum steel)
http://farm4.static.flickr.com/3096/5850511841_542822e485.jpg (http://www.flickr.com/photos/[email protected]/5850511841/)
IMG_2404 (http://www.flickr.com/photos/[email protected]/5850511841/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr


this was right after i painted the bay
http://farm6.static.flickr.com/5073/5850511829_de91c63dcf.jpg (http://www.flickr.com/photos/[email protected]/5850511829/)
IMG_1620 (http://www.flickr.com/photos/[email protected]/5850511829/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr


fenders, skirts, front bumper, lights, and hood is gone. this is just to show you the fitment. it was good, the bumper just shows a lil saggy because it was a knock off.
http://farm6.static.flickr.com/5035/5850511821_06c1a97079.jpg (http://www.flickr.com/photos/[email protected]/5850511821/)
IMG_0912 (http://www.flickr.com/photos/[email protected]/5850511821/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr
http://farm6.static.flickr.com/5185/5850511811_2b232a94ae.jpg (http://www.flickr.com/photos/[email protected]/5850511811/)
IMG_0910 (http://www.flickr.com/photos/[email protected]/5850511811/) by d_2jzgte (http://www.flickr.com/people/[email protected]/), on Flickr

if your interested 530 518 5235

[rocket2ya]

asking price? or did i miss it

[killer240]

it depends what you want with it.
if your interested listed my number or hit the pm button

[killer240]

i guess this is a bump.

alright so here it is

the shell includes S15 core support already welded together, sound deadening, new rack and pinion bushing, new aluminum steering bushing. sittin on 4 lugs, steelies, stock suspension. no brakes, no brake booster or BMC. clutch master cylinder is there. interior pieces is there. rear seat is there, i have to see if i still have my S13 front seats.
free stuff pop up hood, pop up headlight assembly with 1 bracket,

that would be $600

new RLCA +200

Z32 brake package + 500

Z32 rear 5 lug hubs + 120

Z32 uprights with RLCA + 100

300zx black leather seats(powered) + 250

S14 cloth seats + 200

if you get the Z32 brake package, hubs, uprights and RLCA i will throw in 6 Z32 wheels. good for drift spares.

[killer240]

last bump
i will throw in a straight aluminum steel pipe thats 4 ft long and 2.5 inch diameter 16 gauge steel.