PDA

View Full Version : CA Supper Rare HKS PFC F-CON for RB20det


Spencer dougherty
06-17-2011, 10:31 AM
Im selling my supper rare HKS F-Con PFC (Programable Fuel computer) for a Rb20det because i now have a SR 20 in my ride.. tuned for FMIC/3in cat back/1.0bar of boost..14 psi/no fuel cut/no speed cut/rev to 9k/advanced timing/uped fuel curve it just like have a chipped ecu with extras ..i pulled an extra 27 hp & 36 tq when i pulged it in on the dyno. its a plug and play system. takes 5 min to install and works Great!!!

Retails for $780
im looking to get $250


PRICE DROP $210 shipped

call or text any time 1714 3300021 SideWays Performance

The HKS PFC F-CON is a plug-in fuel management system designed to supplement and refine the OEM fuel curve to maintain a proper air/fuel mixture when increasing boost pressure in turbocharged applications. The PFC F-CON optimizes the factory injector pulse width signal by recalibrating information obtained by both the PFC F-CON absolute pressure sensor and the OEM engine control unit (ECU). Each unit is application specific and includes a preprogrammed ROM for a particular performance stage. --- A Fuel Cut Defencer (FCD) is also included in certain PFC F-CON kits to override the factory fuel cutoff. The PFC F-CON offers easy integration via a plug-in vehicle specific wiring harness. If additional adjustment of the PFC F-CON is needed, fine-tuning can be performed via the plug-in HKS Graphic Control Computer (GCC).
The GCC is an electronic tuning component designed to add additional flexibility to the fuel tuning capabilities of the VPC, PFC F-CON or F-CON S. The GCC simply plugs into either the VPC or F-CON harness and allows the user to further adjust the air / fuel ratio at five specific rpm points. Each five points offer an adjustment range of 16% rich to 12% lean, in 2% increments, of the base value. Four different selectable rpm ranges allow maximum rpm level flexibility when tuning the fuel curve. The GCC will interpolate, or average between the rpm points of adjustment to ensure a smooth transition of fuel delivery throughout the RPM band.

http://i167.photobucket.com/albums/u136/driftready1/Photo0932.jpg
http://i167.photobucket.com/albums/u136/driftready1/Photo0933-Copy.jpg
http://i167.photobucket.com/albums/u136/driftready1/Photo0934.jpg

Danielmcn
06-17-2011, 10:35 AM
dude I want this....... I need some more money free bump I hope I can come up with the money before its gone.

Spencer dougherty
06-27-2011, 11:45 PM
no one.. if your local.. will install for free so u can feel the diff

Danielmcn
06-28-2011, 12:01 AM
no one.. if your local.. will install for free so u can feel the diff

you dont know how bad I want it.... Just dont have the spare money right now. Would you trade for any parts or anything other then cash?

Sideways_blksr20
07-19-2011, 12:30 AM
Damnnn if i had my old rb i would buy this... Free bump

Spencer dougherty
07-27-2011, 01:32 AM
bumping,,,,,,

Danielmcn
07-27-2011, 02:01 AM
I pm'ed you jjust have a few questions.

Do you have the map sensor with it? Do you have the GCC? What all does it come with?

Spencer dougherty
07-31-2011, 12:09 PM
this setup does not use a map sensor... comes with everything in the pix

GMAN87
07-31-2011, 03:22 PM
Bnib rear cusco piro ball upper mounts for s13..if ud like to trade///

z32+s13
08-07-2011, 12:17 PM
lol..bro how does $200 sound? asap

Spencer dougherty
08-09-2011, 10:27 AM
im down for 210 shipped...

Spencer dougherty
08-31-2011, 12:41 AM
i still have it

1990sileighty
08-31-2011, 08:56 AM
I want this!!! Ill know by this weekend

Spencer dougherty
09-04-2011, 11:14 PM
end of summer buy now

mopar_nismo
09-05-2011, 09:08 AM
If u still have this on Thursday. It's kind...

Spencer dougherty
09-11-2011, 10:21 AM
bump for supper hard to find parts for rb20dets

Spencer dougherty
09-20-2011, 12:44 AM
back to the top

racerx2k1
09-20-2011, 05:41 PM
no one.. if your local.. will install for free so u can feel the diff

bumping,,,,,,

i still have it

end of summer buy now

bump for supper hard to find parts for rb20dets

back to the top

2 bump limit. You can start new thread in 3 days.