Complete Audio system stuff!! Alpine AMP + JL Audio Subwoofer + Stinger wiring kit!!

[enkei2k]

soldedededded

[enkei2k]

bump #1. obo. pick up preferred for the sub since it's heavy, but willing to ship.

[KOME]

how much shipped minus the wring? 85746

[enkei2k]

how much shipped minus the wring? 85746

it would be $375 shipped. shipping to that zip costs almost $40.00 by FedEx/UPS!

the prices are listed in the original thread.

thanks for looking.

[enkei2k]

lunch time final bump #2

[SLiDe_WaYz]

Ship it USPS it'll be like 20 bucks to ship and insure it.

That sub bangs and that amp is a perfect match for it I had it in a custom ported box. That 1 sub cracked the rear hatch in my last DD car.

[JaredP]

what are the specs on the sub? wattage ratings, rms and all that? i was looking for a jl sub for my spare tire well and couldnt decide between 10" or 12"

[enkei2k]

Ship it USPS it'll be like 20 bucks to ship and insure it.

That sub bangs and that amp is a perfect match for it I had it in a custom ported box. That 1 sub cracked the rear hatch in my last DD car.

good to know, thanks for the info. I'll look into that. I haven't even installed this sound system yet. I had no idea it would bump so much lol. Now I kind of want to keep it, lol.

what are the specs on the sub? wattage ratings, rms and all that? i was looking for a jl sub for my spare tire well and couldnt decide between 10" or 12"

I was planning on putting this in my spare tire compartment also on my S14. I haven't test fitted it or anything, but I think it should fit fine with room to spare.

Here it is taken from the JL Audio website:

JL Audio 10W3v3-2 Subwoofer

Free Air Resonance (Fs): 32.97 Hz
Electrical “Q” (Qes): 0.533
Mechanical “Q” (Qms): 7.027
Total Speaker “Q” (Qts): 0.495
Equivalent Compliance (Vas): 1.136 cu. ft. / 32.17 liters
One-Way, Linear Excursion (Xmax)*: 0.550 in. / 14.0 mm
Reference Efficiency (no): 0.208%
Efficiency (1W/1m)**: 85.37 dB SPL
Effective Piston Area (Sd): 53.475 sq. in. / 0.0345 sq. m.
DC Resistance (Re): 1.70 ohm
Nominal Impedance (Znom): 2 ohm
Thermal Power Handling (Pt): 500W
Driver Displacement: 0.049 cu. ft. / 1.39 liters
Net Weight: 12.25 lbs. / 5.56 kg

Alpine MRP-500 AMP: taken from crutchfield website.
Performance
RMS Power Output (Watts x Channels) 300 x 1
Peak Power Output (Watts x Channels) N/A
Power at 2 Ohms (Watts x Channels) 500 x 1
Bridged Power (Watts x Channels) N/A
Minimum Impedance Bridged N/A
Minimum Impedance Unbridged 2
Best Frequency Response 20-200 Hz
THD at Rated RMS Power 1%
Signal to Noise Ratio 75 dB
Input Voltage 14.4v
Features
Amplifier Class D
Low-Pass Crossover Frequency 50-200 Hz
Low-Pass Slope (dB/octave) 24 dB/oct
High-Pass Crossover Frequency N/A
High-Pass Slope (dB/octave) N/A
Bass Boost 0-12 dB
Bass Boost Frequency 50 Hz
Fan Cooled No
Fuse Rating 30 x 2
Speaker Level Inputs Harness
Preamp Outputs No
LED Power Indicator Yes
Width (inches) 10-11/16
Height (inches) 2-7/16
Depth (inches) 9-9/16

[JaredP]

thanks man, i will look into a few things and get back to you, interested in the sub for sure, possibly amp but i do already have a 4ch that should work

[s14tan]

OMG I want that sub!!!

[enkei2k]

thanks man, i will look into a few things and get back to you, interested in the sub for sure, possibly amp but i do already have a 4ch that should work

no problem. let me know

OMG I want that sub!!!

what's your zip, i can get a shipping quote for you...i'd prefer to sell as a complete set though