PDA

View Full Version : CA FS: Stoptech Brake Kit (front and rear) *lots of life on rotor 'n pads*

mmdb
06-13-2011, 01:15 AM
SOLD!!!! Thanks for your interest!
TriniGT
06-13-2011, 07:34 AM
I am guessing no handbrake setup?
zac 3ne2nr
06-13-2011, 08:02 AM
hydraulic ebrake much to my dismay.
TriniGT
06-13-2011, 08:04 AM
Guessing a separate handbrake setup like a wilwood will be applicable.
mmdb
06-13-2011, 08:24 AM
I forgot to mention this setup is for a z32 so you need the z32 ebrake assembly in order to have a mechanical ebrake working. I have the z32 ebrake assembly if you need it.
zac 3ne2nr
06-13-2011, 08:42 AM
really?
hmm will you sell the rears alone?
mmdb
06-13-2011, 10:31 AM
Yeap. It's a bolt on affair if you already have a working z32 rear ebrake assembly. The rear rotor has a drum built in with it. The kit is quiet a bit expensive because of this. But that's retail of course.

Sure I can sell the rears alone. PM me if you're serious. Money talks.
Project3328
06-13-2011, 11:43 AM
I'll take the fronts, so perfect

Pm me location please I'm in oc
mmdb
06-13-2011, 02:47 PM
Yeah welll as soon as someone takes the rears I'll sell the fronts. i doubtanyone would want to just get a rear set of stoptechs with their biga$$ rotors bigger than the front rotors.
smellslikecurry
06-13-2011, 02:51 PM
how much for the rears...these will bolt right up to my s14 but my ebrake wont work am i correct?
mmdb
06-13-2011, 06:28 PM
They will bolt right up. You will have an ebrake if you have the z32 ebrake drum set.

If you find someone that wants the front I can split it down the middle and do 1200 each set.
mmdb
06-15-2011, 11:58 AM
you buy now!
TriniGT
06-16-2011, 12:22 PM
Can you get me an underside shot of the rear rotors?
Vatche
06-16-2011, 03:21 PM
awesomeness
mmdb
06-16-2011, 05:45 PM
Sure. I'm guessing you want to see the drum for the z32's ebrake? no problem. I'll post up pix when i get home.
mmdb
06-17-2011, 12:12 AM
The inner part of the rear rotor. Again, you must have the z32 ebrake setup already in place to have an ebrake. This kit is from a 300zx.

http://i7.photobucket.com/albums/y259/mmdb/1308291045.jpg
TriniGT
06-17-2011, 05:39 AM
I know you say it is from a Z32 setup but will it be a bolt-on on a silvia with an R33 e-brake setup and does it bolt directly to the front as well?
mmdb
06-17-2011, 08:48 AM
Not sure what he difference is on the r33 ebrake setup so i couldnt tell ya. But if a z32 rotor will fit over the r33 ebrake assemby and line correct t caliper i dont see why not.

Yes. This kit is a straight bolt on. You do not need anything special to run this kit.
zac 3ne2nr
06-17-2011, 09:31 AM
buy it jason.
mmdb
06-22-2011, 12:15 AM
you buy now! (bump)
TriniGT
06-22-2011, 06:12 AM
buy it jason.

Not sure if it makes sense as I am running R34 Brembos to the front already and 300Z to the rear which are being upgraded to R34 Brembos as I have them already. Don't know if it will make a huge difference between the two.
va240dude
06-22-2011, 06:18 AM
Give the guy a break with the questions, if you're too lazy to google it, you shouldn't being buying a baller brake set up like this!!! GLWS Op, legit stuff!
mmdb
06-24-2011, 12:11 AM
Not sure if it makes sense as I am running R34 Brembos to the front already and 300Z to the rear which are being upgraded to R34 Brembos as I have them already. Don't know if it will make a huge difference between the two.

True me neither.


Give the guy a break with the questions, if you're too lazy to google it, you shouldn't being buying a baller brake set up like this!!! GLWS Op, legit stuff!

haha thanks... it's zilvlia so... :)
slider2828
06-24-2011, 12:41 AM
How would you setup the tilton proportioning valve?
mmdb
06-29-2011, 04:53 AM
You'd stick it in line of whichever caliper(s) you want to decrement braking power.