any good S13 SR mechanic in the 818??

[tsaldivar]

long story short, didn't know the consequences of pulling the Cam Angle Sensor till after the fact. If there is someone in the san fernando valley that knows the SR pretty well, and can do a re-do the timing that would be sweet.

[stillnojob]

same thing as timing any other older car find TDC and line up the CAS, put it in then you should be good. BTW there's a Tech Talk thread for these type of questions

[JeKyL]

Download the sr fsm that should help, just Google search Sr20det factory service manual and something should come up or better yet go to phase2motortrend.com and in their search just look up the fsm they have it available for free in pdf

[UNITEDMASTER]

Go to FRsport.com(zilvia vendor) find their poncam install ,& there is a detailed write up on how to set the CAS.

Set the crank pulley on the second mark from the left,remove #1 spark plug, confirm TDC with a screwdriver. Take CAS line up the dot on the gear with the notch on the body of the CAS.Insert into cyl head.

Thats just off the top of my head ,but read that write up!!!!!