View Full Version : In Need Of ECU Help
techtonic1985
06-11-2011, 08:10 PM
Hi,
Ill start with the car... 1992 Nissan 240sx 5speed w/ SR20DET Red Top.. I Killed the ecu (23710 50F10) that was in it... I got a ecu (23710 60F06) and the car will not start will this ecu not work?
By the way there are no bad wires, fuse or relays Plz Help :wtf:
This is a Pic of the ecu I am trying to use
http://i53.tinypic.com/2z4h2r7.jpg
Sileighty_85
06-12-2011, 12:05 AM
2370 60F06- I dont think thats the correct ECU, FAST does not recognize that Part Number
techtonic1985
06-12-2011, 08:05 AM
2370 60F06- I dont think thats the correct ECU, FAST does not recognize that Part Number
Sry I fixed it its 23710 60F06:picardfp:
Sileighty_85
06-12-2011, 09:51 AM
That ECU is for a 96-97 SR20, IIRC that should be a Kouki S13 so the wire harness will be different.
you can make it work you just need to repin your ECU plug
techtonic1985
06-12-2011, 10:14 AM
lol how Do I do the re pin
Sileighty_85
06-12-2011, 10:24 AM
either remove the pin and swap it or cut and solder, there should be a thread around here telling you how to do it, Its only a few wires though too.
techtonic1985
06-12-2011, 10:39 AM
either remove the pin and swap it or cut and solder, there should be a thread around here telling you how to do it, Its only a few wires though too.
Can you link it i cant find it but I am using my cell so.... its hard to find stuff in forms... and thank you for all you help ( :
smelly240
06-12-2011, 06:53 PM
its 8 wires u gotta move - depin DO NOT CUT AND SOLDER THEM THATS STUPID
Take each ones pinout - its cake.
techtonic1985
06-12-2011, 07:05 PM
its 8 wires u gotta move - depin DO NOT CUT AND SOLDER THEM THATS STUPID
Take each ones pinout - its cake.
I need to know what ones to move
smelly240
06-14-2011, 07:09 AM
take pinout from 91-94 ecu - and 97 ecu and you look at which ones are different and u switch em around -
Or pay someone that knows what they're doing to do it.
Theres no "DIY" thread on it because if you can wire up a sr - you can do this without issues
techtonic1985
06-14-2011, 05:22 PM
take pinout from 91-94 ecu - and 97 ecu and you look at which ones are different and u switch em around -
Or pay someone that knows what they're doing to do it.
Theres no "DIY" thread on it because if you can wire up a sr - you can do this without issues
I got it running I just need to re do the wires who ever put them in the car did a bad job... there are a lot of cut/re wire any thought's on how to re do it...
:Owned:
vBulletin® v3.8.11, Copyright ©2000-2021, vBulletin Solutions Inc.