blakeZX
06-07-2011, 01:34 PM
Made some changes to my setup so I am now offering some parts for sale that should help someone get their RB25DET swap up and running. Also some misc aftermarket and OEM stuff you may need.
*Note : All prices are BEFORE shipping. Shipping quotes available upon request. All parts are in good/excellent condition unless otherwise noted.
R33 Skyline crossmember (needed for Syko mounts) - SOLD
RB25 OEM motor mounts - SOLD
RB25 OEM transmission mount - SOLD
http://i56.tinypic.com/bdozs8.jpg (http://i56.tinypic.com/bdozs8.jpg)
RB25 aftermarket turbo dump elbow, divorced wastegate - SOLD
RB25 OEM turbo recirculation valve - $20
http://i55.tinypic.com/33cx5s4.jpg (http://i55.tinypic.com/33cx5s4.jpg)
Sheepdog PROF blow-off valve on OEM RB25 cold pipe - SOLD
http://i53.tinypic.com/jl4apk.jpg (http://i53.tinypic.com/jl4apk.jpg)http://i51.tinypic.com/2jcdauv.jpg (http://i51.tinypic.com/2jcdauv.jpg)
Super-mad-tight JDM, rare in the states. If you know what it is, you know it sounds awesome. Will not separate from cold pipe. Includes original packaging, vacuum (http://zilvia.net/f/#) hose, a legit white decal, and Japanese instructions.
80
Samco blue silicone radiator hoses for RB20/25/26 - $80
http://i53.tinypic.com/112h3bp.jpg (http://i53.tinypic.com/112h3bp.jpg)
Brand new, never used. Just collecting dust; someone can use these I'm sure. I didn't want to hack them up to install my swirl tank and coolant temp inline adapters.
RB25 OEM clutch kit, includes pressure plate, disc, throwout bearing - $60
http://i52.tinypic.com/2mhwzkz.jpg (http://i52.tinypic.com/2mhwzkz.jpg)
Lots of meat on the clutch, was new when the motor was swapped. Changed it out for an ACT 6-puck to hold more power since I'm upgrading my turbo..also fits RB20 and VG30DE.
RB25/VG30DE/TT OEM Thermostat - $10
http://i55.tinypic.com/281d06t.jpg (http://i55.tinypic.com/281d06t.jpg)
Works great, removed to install colder Nismo unit. Includes Permatex thermostat housing gasket maker at no extra charge, lol.
Mishimoto 19psi (1.3bar) high-pressure radiator cap - $20
Used for two oil changes..then I installed a PSM swirl tank which came with a different cap. So I no longer need this. I think Nismo caps are only 16psi..this is 19. I don't have a pic but it is squeaky clean!
Modified RB25 oil pan for use with RB26DETT (clears 26 oil pickup) - SOLD
http://i55.tinypic.com/14llfva.jpg (http://i55.tinypic.com/14llfva.jpg)
Was test-fitted and filled with oil but never used. This pan was modified to be used for an RB26 RWD conversion. I’m running a regular old 25 so no need for the extra clearance. However, it will fit a standard RB25 no problem, in case you were wondering.
Wheel spacers:
-Powered By Max 20MM bolt-on (5x114.3) - SOLD
With removable hub rings. Discontinued part. Includes nuts.
-Generic 10MM slip-ons (5x114.3 and 4x114.3) - $25
-Generic 7MM slip-ons (Universal 5-lug) - $15
http://i55.tinypic.com/29qi49g.jpg (http://i55.tinypic.com/29qi49g.jpg)
S14 tiny coolant hose (filler neck to overflow tank, with clamps) - $5
http://i54.tinypic.com/2z80lub.jpg (http://i54.tinypic.com/2z80lub.jpg)
S14 OEM suspension links:
RUCA's - $15
Toe rods - $15
Tension rods (oem bushings are a little bit janky but they work fine) - $10
http://i56.tinypic.com/6ehedx.jpg (http://i56.tinypic.com/6ehedx.jpg)
*Buy the whole set for $25.
S14 OEM front rotors - $20/pair
http://i52.tinypic.com/rkbprl.jpg (http://i52.tinypic.com/rkbprl.jpg)
Great condition, includes dust shields if you want them. I swapped them out for Z32's so no longer needed. These are iron, and thus heavy.
S14 OEM black glovebox - $15
http://i51.tinypic.com/3443w61.jpg (http://i51.tinypic.com/3443w61.jpg)
Couple of scratches but overall looks decent.
S14 OEM grey rearview mirror - $20
http://i54.tinypic.com/30be6j9.jpg (http://i54.tinypic.com/30be6j9.jpg)
Great condition, no nicks/scratches.
PAYMENT:
Obviously, cash is preferred if you are local. Please add 3% for all payments made through PayPal to cover fees. If you want multiple items, I may be able to cut you a package deal (http://zilvia.net/f/#). It never hurts to ask. No refunds/exchanges, all sales are final.
SHIPPING:
All items ship from San Diego, CA. Please provide your zip code and a list of the items you are interested in for a shipping quote. Items will ship within 1-2 days of cleared payment, tracking number provided upon shipment.
If you are interested in picking up locally, let me know. If you’re coming from LA or OC and you are buying a large item or a lot of small items, I can meet you as far north as Oceanside on one of my days off.
Please PM me or text sixONEnine-NINEtwoNINE-sixONEnineSIX. My name is Blake. Thanks.
*Note : All prices are BEFORE shipping. Shipping quotes available upon request. All parts are in good/excellent condition unless otherwise noted.
R33 Skyline crossmember (needed for Syko mounts) - SOLD
RB25 OEM motor mounts - SOLD
RB25 OEM transmission mount - SOLD
http://i56.tinypic.com/bdozs8.jpg (http://i56.tinypic.com/bdozs8.jpg)
RB25 aftermarket turbo dump elbow, divorced wastegate - SOLD
RB25 OEM turbo recirculation valve - $20
http://i55.tinypic.com/33cx5s4.jpg (http://i55.tinypic.com/33cx5s4.jpg)
Sheepdog PROF blow-off valve on OEM RB25 cold pipe - SOLD
http://i53.tinypic.com/jl4apk.jpg (http://i53.tinypic.com/jl4apk.jpg)http://i51.tinypic.com/2jcdauv.jpg (http://i51.tinypic.com/2jcdauv.jpg)
Super-mad-tight JDM, rare in the states. If you know what it is, you know it sounds awesome. Will not separate from cold pipe. Includes original packaging, vacuum (http://zilvia.net/f/#) hose, a legit white decal, and Japanese instructions.
80
Samco blue silicone radiator hoses for RB20/25/26 - $80
http://i53.tinypic.com/112h3bp.jpg (http://i53.tinypic.com/112h3bp.jpg)
Brand new, never used. Just collecting dust; someone can use these I'm sure. I didn't want to hack them up to install my swirl tank and coolant temp inline adapters.
RB25 OEM clutch kit, includes pressure plate, disc, throwout bearing - $60
http://i52.tinypic.com/2mhwzkz.jpg (http://i52.tinypic.com/2mhwzkz.jpg)
Lots of meat on the clutch, was new when the motor was swapped. Changed it out for an ACT 6-puck to hold more power since I'm upgrading my turbo..also fits RB20 and VG30DE.
RB25/VG30DE/TT OEM Thermostat - $10
http://i55.tinypic.com/281d06t.jpg (http://i55.tinypic.com/281d06t.jpg)
Works great, removed to install colder Nismo unit. Includes Permatex thermostat housing gasket maker at no extra charge, lol.
Mishimoto 19psi (1.3bar) high-pressure radiator cap - $20
Used for two oil changes..then I installed a PSM swirl tank which came with a different cap. So I no longer need this. I think Nismo caps are only 16psi..this is 19. I don't have a pic but it is squeaky clean!
Modified RB25 oil pan for use with RB26DETT (clears 26 oil pickup) - SOLD
http://i55.tinypic.com/14llfva.jpg (http://i55.tinypic.com/14llfva.jpg)
Was test-fitted and filled with oil but never used. This pan was modified to be used for an RB26 RWD conversion. I’m running a regular old 25 so no need for the extra clearance. However, it will fit a standard RB25 no problem, in case you were wondering.
Wheel spacers:
-Powered By Max 20MM bolt-on (5x114.3) - SOLD
With removable hub rings. Discontinued part. Includes nuts.
-Generic 10MM slip-ons (5x114.3 and 4x114.3) - $25
-Generic 7MM slip-ons (Universal 5-lug) - $15
http://i55.tinypic.com/29qi49g.jpg (http://i55.tinypic.com/29qi49g.jpg)
S14 tiny coolant hose (filler neck to overflow tank, with clamps) - $5
http://i54.tinypic.com/2z80lub.jpg (http://i54.tinypic.com/2z80lub.jpg)
S14 OEM suspension links:
RUCA's - $15
Toe rods - $15
Tension rods (oem bushings are a little bit janky but they work fine) - $10
http://i56.tinypic.com/6ehedx.jpg (http://i56.tinypic.com/6ehedx.jpg)
*Buy the whole set for $25.
S14 OEM front rotors - $20/pair
http://i52.tinypic.com/rkbprl.jpg (http://i52.tinypic.com/rkbprl.jpg)
Great condition, includes dust shields if you want them. I swapped them out for Z32's so no longer needed. These are iron, and thus heavy.
S14 OEM black glovebox - $15
http://i51.tinypic.com/3443w61.jpg (http://i51.tinypic.com/3443w61.jpg)
Couple of scratches but overall looks decent.
S14 OEM grey rearview mirror - $20
http://i54.tinypic.com/30be6j9.jpg (http://i54.tinypic.com/30be6j9.jpg)
Great condition, no nicks/scratches.
PAYMENT:
Obviously, cash is preferred if you are local. Please add 3% for all payments made through PayPal to cover fees. If you want multiple items, I may be able to cut you a package deal (http://zilvia.net/f/#). It never hurts to ask. No refunds/exchanges, all sales are final.
SHIPPING:
All items ship from San Diego, CA. Please provide your zip code and a list of the items you are interested in for a shipping quote. Items will ship within 1-2 days of cleared payment, tracking number provided upon shipment.
If you are interested in picking up locally, let me know. If you’re coming from LA or OC and you are buying a large item or a lot of small items, I can meet you as far north as Oceanside on one of my days off.
Please PM me or text sixONEnine-NINEtwoNINE-sixONEnineSIX. My name is Blake. Thanks.