PDA

View Full Version : Pensacola/ Milton FL area people with s14 SR


Hoffman5982
06-07-2011, 12:20 AM
So for the past few months I've had nothing but problems with my car. Actually, since I did the swap in August I've had problems. In February I found out I had a cracked piston so I rebuilt the top and bottom end. Last month I got everything back together and reinstalled. Now, the car starts perfectly, but has a pretty bad misfire. Timing is fine, and I know the coil pack harness is fine. I personally think I need a new WS harness but before I order that I'd like to test a couple of other components first. Mainly the ECU, Ignitor, and MAF. So, if anyone in the area has a stock ECU and MAF for a zenki s14 SR and would be willing to let me plug it in for a few minutes to see what the car does, that would be extremely helpful. Thanks in advance

DinoMan
08-02-2011, 03:34 PM
I would help but i have an s13 sr :/

duylam87
08-29-2011, 12:07 PM
What Engine you swap in? and what kind of fuel pump u using?

ka-titties
08-29-2011, 01:14 PM
plugs gapped correctly?

x3thelast
08-29-2011, 01:37 PM
hmmm kinda sounds like whats going on with my engine. backfires quite a bit. turned down the fuel pressure since i had an aftermarket fuel pump and that helped a bit. only solution i can think of for MY problem is to get a tune.

what pump are you running?

duylam87
08-29-2011, 07:48 PM
I need to know what kind of fuel pump he using, and what kind of maf air he using also. from my experience, if you using stock fuel pump, then it would cause a problem, also maf air can cause a problem if you using different maf air rather than red top or black top maf air. Also check all the vacuum hose, see if you plug it in problably