crossmember ?'s

[marsworld]

Does anyone know what the diffrence is between the s13 and s14 front crossmember.
What modifications is needed to install an s13 crossmember on an s14.

Thanks Fellas

[roushman90]

Transmission crossmember? If so, the M/T crossmembers are the same for S13/S14

[marsworld]

Im actrualy refering to the front crossmember.. The one that holds the power steering rack together..

[roushman90]

Im actrualy refering to the front crossmember.. The one that holds the power steering rack together..

http://www.zilvia.net/f/tech-talk/79134-haha-another-answer-quick-needed-s13-s14-cross-member-same.html

I have a 93, 95, and 97 crossmember all sitting in the shop. They're all identical as far as bolt spacing and mount fitment. As I said the line attachment points are different. That's it.

I've put 13 racks into 14s, 14 racks into 13s, and one 14 crossmember into a 13.

Now it's possible that the 89-90 member is different than the 91-94, but my information is still correct with respect to DOHC members. And of course the part numbers are different, the parts themselves are different (line attachment points, remember). You can also use S13 mounts on an S14 and vice versa, so how could the member be different?

[marsworld]

ok i understand.
The thing is, we made an oil pan for my swap that fits perfect in the s13, had the oil pan installed on the motor and motor in car and running.
Now im putting this swap into an s14, but the oil pan is now hiting the crossmember, rack ect...
So i was thinking i could put the s13 crossmember on the s14. but before i did that i wanted to know if their was a diffrence.