Sr20detman's Sale - Yakima, Peak, Z32, SR, s13

[Vatche]

Updated June, 3 2011 11:19am
Located:Oceanside and Orange County

Z32 OEM Tie Rod Inners Used for less then 6 months $50
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/IMG00348-20110318-1237640x480.jpg

Peak Performance Outer Tie Rod Ends Used for less then 6 months $100
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/IMG00392-20110524-2248640x480.jpg

Yakima Viper Bike RacksBrand New Never Mounted. One has Key with Lock. Retail at $120 each. $180 Firm
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/IMG_5469640x480.jpg

Stock SR20DET Intake Manifold Comes with both Intake Manifold gaskets in good condition, and whatever in picture, No IACV, No Throttle Body $45
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/100_3549480x640.jpg

Stock s13 Power Steering Low Pressure Hoses w/ Clamps Were bought new from dealer less than a year ago(Also might have cooling hardline for sale soon) $25
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/IMG00347-20110318-0041640x480.jpg

Stock s13 Coupe Automatic Brown Seat Belt System w/ Ecu Rails, Belts minus driver belt, Ecu $50obo

SOHC Throttle Cable $8
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/100_3563640x480.jpg

Sr20det Coolant Hard Linew/rubber hoses $15
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/IMG00380-20110428-0047640x480.jpg

Stainless Steel Clutch Line Not sure if this is direct bolt on. $15
any other random part in that picture. $5
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/100_3550640x480-1.jpg

Stock SR20DET Thermostat $5
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/100_3562640x480.jpg

Front s13 240sx Stock 24mm Sway Bar Energy Suspension Polyurethane Black Bushings $10
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/IMG00357-20110325-1708640x480.jpg

20 Gorilla Lug Nuts10 Used, 10 Never Used - Close ended tuner 7/16 thread used with morosso studs #21173HT $18
20 Gorilla Lug Nut Key$8
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/IMG00401-20110604-0017640x480.jpg

Anything in this picture $5
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/100_3553480x640-1.jpg

s13 240sx Brand New Yamato Garage Rear Sway bar 27.5mmOne on Left, Just sway bar, No Bushings $80
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/IMG00314-20110124-1536.jpg

Front s13 240sx Stock 24mm Sway Bar. $15
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/IMG00239-20101204-1359.jpg

s13 240sx Stock Cruise Control Unit. $5
http://i73.photobucket.com/albums/i220/o0jh/car%20parts/100_3544480x640.jpg

[golf]

can u send me a pix of the lug nuts?

[Vatche]

bump for the weekend!

[ka-turbo]

im a lil confused hopefully u can clear this up for me....are ppl using z32 inner tie rod inners to get more steering angle and wat is need to make this work?...and how much angle do u get????....PM me for response

[Vatche]

the z32 inner rods are actually shorter i believe, i could be wrong, they might be the same length as s13. but they are thicker. which is beefier.

i used them with the peak performance tie rods ends just fine.
but i went with a different set up.

if your looking for longer inner tie rods, then s14 ones are the way to go. but i think you need the drift speed knuckles to create more angle. im not an expert on angle. i do road racing and i just wanted to fix the geometry of the suspension. to fix bumpsteer

[Vatche]

bump #2 final bumpskies.