Work rezax 2's help needed

[ezza]

hi all

Im going to be finishing building my rezax II's soon but i want to get some new bolts for them, what should i be using?

Will BBS RS bolts be ok with them being 3 peice too?

any help much appreciated

[krappy]

I believe work uses m6 bolts and bbs uses m7, but I might be wrong.

[blueshark123]

theres places that say what size bbs bolts are but you need to first remove a bolt from your wheel and compare to see what you need.bbs rs bolts also only has thread half of the bolt not completely threaded bbs rm are fully threaded so u need to see what yours are also

[NismoPlsr]

My Rezax I are M8.

You can buy work bolts here.
Assembly Bolts (http://workwheelsonline.com/assembly-bolts.html)

Another place to buy M8 wheel bolts.
http://www.titanium-touch.de/titaniumtouche/index.htm

I am 95% positive that BBS RS are M7 bolts so a no-go there.

[ezza]

thanks^

can anyone confirm what the Rezax II are?

[herbieS13]

you can use any bolt as long and size and thread pitch is correct for your wheel

[ezza]

what? i dont even know where to start with that, i appreciate your imput and all but.....

a) that means i CANT use any bolt/nut
b) you have just basically re-worded the question

[herbieS13]

what i mean is, if the M8 bolt from the rezax I has the same lenght, thread pitch, and thread size then it will work, do u have a bolt for comparison

[ezza]

The wheels are in peices atm but i think i do have a couple of the bolts left somewhere.

what points am i measuring?