PDA

View Full Version : NY Complete S14SR20DET Swap For Sale


WoolyS14DET
05-28-2011, 12:39 PM
SAVE THE NEGATIVE COMMENTS FOR ANOTHER THREAD I DONT WANT TO HERE IT !!!!!!



I have a complete swap for sale out of my 98 240SX which has about 45,xxx miles on it total, About 8,000 miles since it was put in my car over 5 years ago. The motor came from an engine importer in California and was out of Automatic Silvia in Japan . I rebuilt the motor and installed it when I was still living in California and used nothing but top shelf parts. Oil has been changed every 1,500 miles with Castrol Synthetic 10W40 Oil & OEM Nissan Oil Filter. It pulls hard and has never left me stranded. The Swap will include the COMPLETE ENGINE & TRANS HARNESS, ECM & TONS OF EXTRAS !!!!. I will also be adding some extra spare parts if the buyer wants at the time or purchase. I'm not in a rush to sale so I will find the right buyer.

I know that I am most likely forgetting some things that are not listed but see the spec list below


Motor is still in car and running and can be seen or I will take serious buyers for a ride.


S14 SR20DET Complete Motor with 45,xxx miles.
Stock Rods & Pistons
ARP Head Studs
Cometic Head Gasket
All new OEM Nissan Gaskets & Seals
Completely rebuilt head with:
All new Valve seals (Int & Exh)
All new Freeze Plugs
3 Angle valve job
Head was surfaced .002 to ensure it was not warped
JWT (Jim Wolf Tech) Exhaust Valve Guides
JWT S3 Cams
JWT Valve Springs (Required for JWT S3 Cams)
Tomei RAS (Rocker Arm Stoppers)
New OEM Nissan VTC Solenoid
Greddy Intake Manifold
Nismo 555cc Injectors
Oem Exhaust Manifold
Garrett GT2860 (Disco Potato) Turbo with about 8k miles (No Shaft Play)
Circuit Sports AN Type Braided Oil feed lines
Circuit Sports AN Type Braded Water Lines
Greddy 5 Quart Oil Pan
Greddy Pulleys
Greddy Intercooler Kit (Modified)
Greddy Oil Filter Relocation Kit (Not Installed but I will include with sale)
Greddy (Trust) 3in Down Pipe
Greddy Oil Cap
Blitz Blow Off Valve
T-Bolt clamps
Nismo Motor & Trans Mounts
Split Fire Coil Packs & Ignition System Upgrade
Brand New OEM Nissan Spark Plugs (P#22401-20J07)
HKS Suction Kit (Intake)
Nissan OEM Z32 Air Flow Meter (Bought New For Swap)
Mishimoto SR20 Radiator
Samco Sport Radiator Hoses (Black)
Most of water bypass hoses were replaced when motor was built
New OEM Nissan Water Pump
New OEM Nissan Oil Pump
Nismo Thermostat
HKS Fan Controller
Blitz Turbo Timer w/Harness
Blitz Power Meter
Blitz SBCiD Boost Controller
JWT ECU That has been specially tuned for this setup (Tuned By Clark @ JWT)
S14 5 Speed trans. Completely rebuilt trans with about 3,000 miles on it. (New bearings, syncros, seals and new main shaft)
New SPEC 6 Puck Clutch (Less then 1000 miles on it.)
New Spec Aluminum Flywheel (Less then 1000 mile on it)
B&M Short Shifter
Nismo Clutch Slave Cylinder
Phase 2 Motortrend Stainless Steel Clutch Line
Nismo Shift Knob

http://i34.photobucket.com/albums/d102/woolcj/IMG_0396.jpg
http://i34.photobucket.com/albums/d102/woolcj/IMG_0388.jpg
http://i34.photobucket.com/albums/d102/woolcj/IMG_0390.jpg
http://i34.photobucket.com/albums/d102/woolcj/IMG_0403.jpg



Asking Price $6K OBO
Low Ballers can lick my sack !!
Serious buyers only !!

E2EKIELR34
05-31-2011, 04:44 PM
bump for an awesome motor and legit guy!!

MADE
05-31-2011, 09:42 PM
I had a ride in this thing and I know the owner takes care of his stuff, like no other. The new buyer will get a solid engine.

Marcus
05-31-2011, 10:58 PM
bump for another meticulous mechanic.


going v8?

an_orange_s2k
05-31-2011, 11:20 PM
wow a lot invested in this motor, glws!

sushi slanger
06-14-2011, 07:18 PM
Pretty sweet...like the green

WoolyS14DET
06-19-2011, 10:31 AM
Bump to the top !!

bornslippy73
06-19-2011, 01:06 PM
" Low Ballers can lick my sack !! " LMAO ! This statement should seriously be in every for sale post that sells legit high end parts. You forgot to add Low Ballers will be knocked unconscious by my meat rod !!

How much would something like this cost to be shipped to California? Ballpark figure? I'd take it, but I'm in the middle of getting a R6 (Ken [an orange s2k] knows whats up).

If this is still available about mid July I'll PM you. GLWS.

MADE
06-20-2011, 03:45 AM
Josh
What ever you swap in next if the Strut tower bar doesnt fit, I'll buy it, no need to even post it.

1CLNS14
06-23-2011, 11:24 PM
Wtf!!!!! Ur selling bro? Must be something in the works for this to be up for grabs!!! Seen this run inperson, worth every penny!!!! Hit up when u get a chance bro!!!

WoolyS14DET
07-08-2011, 06:50 AM
Thanks for all the comments guys.

There will be some BONUS parts added that I have stashed away that are brand new in the box for this motor that will go to the buyer.

2jzgtes14
07-08-2011, 02:17 PM
do u have an extra vtc solenoid? thanks

240zach
07-08-2011, 06:38 PM
do you have an extra stock maf for it?

WoolyS14DET
07-12-2011, 09:03 AM
Bump to the TOP !!


Help me fund my new project !!!!:bigok:

WoolyS14DET
07-26-2011, 01:49 PM
Last BUMP before thread gets closed !!

Marcus
07-26-2011, 03:32 PM
good luck with sale buddy

simplistek
07-26-2011, 11:41 PM
Wtf Josh? Damn, can't wait to see what's going into your car. Really legit motor. Don't even have to clutch kick to make the tires spin.

WoolyS14DET
08-07-2011, 09:54 AM
Wtf Josh? Damn, can't wait to see what's going into your car. Really legit motor. Don't even have to clutch kick to make the tires spin.


Something bigger and better and it's going to be sick.

Future240
08-07-2011, 12:33 PM
Bump to the top !!

Thanks for all the comments guys.

There will be some BONUS parts added that I have stashed away that are brand new in the box for this motor that will go to the buyer.

Bump to the TOP !!


Help me fund my new project !!!!:bigok:

Last BUMP before thread gets closed !!

Something bigger and better and it's going to be sick.

Over the 2 bump limit you can start a new thread in 3 days.