garagelu
05-24-2011, 08:09 PM
PM me or text me at 256-653-4264 Kevin. I am located in downtown ATL.
S14 SR20DET Motorset-This motorset was bought as a front clip back in 2003. The internals have never been touched. Stock head gasket and the valve cover haven't even been taken off before. Whole engine is perfect and runs perfect. Compression is 165, 165. 163, 164 psi.
The front clip came with the gauge cluster so I know the engine was a true 40K mile engine when purchased.
NOTE: This motorset WILL NOT include the following:
Turbo: Had a 2871r and sold it separate to make more money.
Turbo lines: Lines were sold with the turbo and do not have the stock lines.
Injectors: Had Nismo 555cc injectors and sold it seperate to make more money.
MAF: Had a Z32 MAF (still have it and can include it for 75 dollars, otherwise you will need a stock MAF.)
This motorset WILL include:
SPEC Stage 2 clutch: This is about a 300 dollar value
Wiring Harness: Already wired for s14 US chassis. 200-250 dollars value
Walbro fuel pump: This is about a 100 dollar value
Ignitor
ECU
Stock SMIC: I have a complete Greddy FMIC for 250 dollars if bought with the SR
I may be missing some other stuff on my list.
The engine is still in the car and if you need anything else to complete the swap, I will pretty much give you all the little stuff for free like heater hoses, misc brackets, etc.
Option 1-Engine is still in the car and I do not have an engine hoist. I am trying to get an engine hoist right now but if you can get here and let me borrow the hoist and give me a 2nd hand, I will knock off 50 dollars off the purchase price. Everything is already unhooked. All I need to do is unbolt the motor mounts and pull the engine out.
PRICE: 1950 dollars
Option 2-If the engine is already out of the car, the price is:
PRICE: 2000 dollars
SOLD!!!!!!!!!!!!!!
http://farm4.static.flickr.com/3612/5719843324_4530fff942_z.jpg
http://farm3.static.flickr.com/2089/5719283061_49c8833099_z.jpg
http://farm4.static.flickr.com/3006/5719843828_9cf8a6a275_z.jpg
http://farm3.static.flickr.com/2721/5719846106_5a39516a5a_z.jpg
Cusco carbon fiber front strut bar-Strut bar is in great condition. The carbon fiber and clear coat are perfect. The strut tower mounts are painted steel and have some chips but can be easily repainted.
PRICE: 160 shipped-SOLD
http://farm6.static.flickr.com/5242/5685274945_7ba4a1072d_z.jpg
http://farm6.static.flickr.com/5189/5685275199_88ab2311f5_z.jpg
S14 fender liners-Good condition...just some bug guts on it.
PRICE: 50 shipped-SOLD
http://farm3.static.flickr.com/2551/5722437074_cb44065db8_z.jpg
Bottom mount SR turbo line-Brand new and not sure what brand it is. Most likely circuit sports.
PRICE: 30 shipped
http://farm3.static.flickr.com/2647/5721879271_bc07cfaf4a_z.jpg
Apexi SAFC subharness-extra subharness I have and its in good condition.
PRICE: 30 shipped
http://farm3.static.flickr.com/2124/5722435334_4fe878fae6_z.jpg
240sx manual trans crossmember-need for a 5 speed swap. nothing wrong with it.
PRICE: 60 shipped
http://farm3.static.flickr.com/2129/5721875381_16c8fb034f_z.jpg
300zx aluminum knuckles-good condition and nothing wrong with them.
PRICE: 50 shipped
http://farm4.static.flickr.com/3422/5722430180_27f3db7b3a_z.jpg
S14 seatbelts-Black and works fine.
PRICE: 60 shipped---SOLD
http://farm4.static.flickr.com/3554/5721871467_55211a4694_z.jpg
Apexi SR radiator-I bought this thing brand new about 3 years ago and its been a great radiator for me. Cools great because its made of copper. It was originally all blue but I painted the top and bottom end tanks black. It may look rough but it does not leak and works fine.
PRICE: 130 shipped
http://farm4.static.flickr.com/3540/5721871949_5cecda1514_z.jpg
http://farm3.static.flickr.com/2177/5722429576_202cbd6a81_z.jpg
S14 rear lower control arms-Ball joints have been replaced with Moog about a year ago and both are untorn. Everything is in good shape.
PRICE: 65 shipped EACH
http://farm3.static.flickr.com/2493/5722430970_90d66a7e5e_z.jpg
SPL Parts S14 diff aluminum bushings-This utilizes full Al rear mount bushings and a half Al and half rubber bushing in the front mount.
PRICE: 75 shipped-SOLD
http://farm3.static.flickr.com/2406/5721876531_2fd436d724_z.jpg
S14 SR20DET OEM Polished Manifold-This manifold is completely polished and its stock. Not much to say about it.
PRICE: 75 shipped-SOLD
http://farm6.static.flickr.com/5149/5692079064_490edcde5c_z.jpg
SR20DET Fan Clutch-Works fine and does not come with the fan.
PRICE: 25 shipped
http://farm6.static.flickr.com/5029/5692079836_895db0617f_z.jpg
S14 Digital Climate Control-No harness. Other than that the unit works and looks pretty good.
PRICE: 40 shipped-SOLD
http://farm3.static.flickr.com/2271/5757036478_1b1d4f71cf_z.jpg
Energy Suspension S13/S14/S15 knuckle bushings-These are brand new and leftover from the full kit.
PRICE: 35 shipped
http://farm3.static.flickr.com/2145/5757036682_7ccf33d9a9_z.jpg
Greddy Airinx Intake-Not in perfect condition but works fine.
PRICE: 45 shipped-SOLD
http://farm3.static.flickr.com/2573/5756491153_141535794d_z.jpg
S14 SR20DET Motorset-This motorset was bought as a front clip back in 2003. The internals have never been touched. Stock head gasket and the valve cover haven't even been taken off before. Whole engine is perfect and runs perfect. Compression is 165, 165. 163, 164 psi.
The front clip came with the gauge cluster so I know the engine was a true 40K mile engine when purchased.
NOTE: This motorset WILL NOT include the following:
Turbo: Had a 2871r and sold it separate to make more money.
Turbo lines: Lines were sold with the turbo and do not have the stock lines.
Injectors: Had Nismo 555cc injectors and sold it seperate to make more money.
MAF: Had a Z32 MAF (still have it and can include it for 75 dollars, otherwise you will need a stock MAF.)
This motorset WILL include:
SPEC Stage 2 clutch: This is about a 300 dollar value
Wiring Harness: Already wired for s14 US chassis. 200-250 dollars value
Walbro fuel pump: This is about a 100 dollar value
Ignitor
ECU
Stock SMIC: I have a complete Greddy FMIC for 250 dollars if bought with the SR
I may be missing some other stuff on my list.
The engine is still in the car and if you need anything else to complete the swap, I will pretty much give you all the little stuff for free like heater hoses, misc brackets, etc.
Option 1-Engine is still in the car and I do not have an engine hoist. I am trying to get an engine hoist right now but if you can get here and let me borrow the hoist and give me a 2nd hand, I will knock off 50 dollars off the purchase price. Everything is already unhooked. All I need to do is unbolt the motor mounts and pull the engine out.
PRICE: 1950 dollars
Option 2-If the engine is already out of the car, the price is:
PRICE: 2000 dollars
SOLD!!!!!!!!!!!!!!
http://farm4.static.flickr.com/3612/5719843324_4530fff942_z.jpg
http://farm3.static.flickr.com/2089/5719283061_49c8833099_z.jpg
http://farm4.static.flickr.com/3006/5719843828_9cf8a6a275_z.jpg
http://farm3.static.flickr.com/2721/5719846106_5a39516a5a_z.jpg
Cusco carbon fiber front strut bar-Strut bar is in great condition. The carbon fiber and clear coat are perfect. The strut tower mounts are painted steel and have some chips but can be easily repainted.
PRICE: 160 shipped-SOLD
http://farm6.static.flickr.com/5242/5685274945_7ba4a1072d_z.jpg
http://farm6.static.flickr.com/5189/5685275199_88ab2311f5_z.jpg
S14 fender liners-Good condition...just some bug guts on it.
PRICE: 50 shipped-SOLD
http://farm3.static.flickr.com/2551/5722437074_cb44065db8_z.jpg
Bottom mount SR turbo line-Brand new and not sure what brand it is. Most likely circuit sports.
PRICE: 30 shipped
http://farm3.static.flickr.com/2647/5721879271_bc07cfaf4a_z.jpg
Apexi SAFC subharness-extra subharness I have and its in good condition.
PRICE: 30 shipped
http://farm3.static.flickr.com/2124/5722435334_4fe878fae6_z.jpg
240sx manual trans crossmember-need for a 5 speed swap. nothing wrong with it.
PRICE: 60 shipped
http://farm3.static.flickr.com/2129/5721875381_16c8fb034f_z.jpg
300zx aluminum knuckles-good condition and nothing wrong with them.
PRICE: 50 shipped
http://farm4.static.flickr.com/3422/5722430180_27f3db7b3a_z.jpg
S14 seatbelts-Black and works fine.
PRICE: 60 shipped---SOLD
http://farm4.static.flickr.com/3554/5721871467_55211a4694_z.jpg
Apexi SR radiator-I bought this thing brand new about 3 years ago and its been a great radiator for me. Cools great because its made of copper. It was originally all blue but I painted the top and bottom end tanks black. It may look rough but it does not leak and works fine.
PRICE: 130 shipped
http://farm4.static.flickr.com/3540/5721871949_5cecda1514_z.jpg
http://farm3.static.flickr.com/2177/5722429576_202cbd6a81_z.jpg
S14 rear lower control arms-Ball joints have been replaced with Moog about a year ago and both are untorn. Everything is in good shape.
PRICE: 65 shipped EACH
http://farm3.static.flickr.com/2493/5722430970_90d66a7e5e_z.jpg
SPL Parts S14 diff aluminum bushings-This utilizes full Al rear mount bushings and a half Al and half rubber bushing in the front mount.
PRICE: 75 shipped-SOLD
http://farm3.static.flickr.com/2406/5721876531_2fd436d724_z.jpg
S14 SR20DET OEM Polished Manifold-This manifold is completely polished and its stock. Not much to say about it.
PRICE: 75 shipped-SOLD
http://farm6.static.flickr.com/5149/5692079064_490edcde5c_z.jpg
SR20DET Fan Clutch-Works fine and does not come with the fan.
PRICE: 25 shipped
http://farm6.static.flickr.com/5029/5692079836_895db0617f_z.jpg
S14 Digital Climate Control-No harness. Other than that the unit works and looks pretty good.
PRICE: 40 shipped-SOLD
http://farm3.static.flickr.com/2271/5757036478_1b1d4f71cf_z.jpg
Energy Suspension S13/S14/S15 knuckle bushings-These are brand new and leftover from the full kit.
PRICE: 35 shipped
http://farm3.static.flickr.com/2145/5757036682_7ccf33d9a9_z.jpg
Greddy Airinx Intake-Not in perfect condition but works fine.
PRICE: 45 shipped-SOLD
http://farm3.static.flickr.com/2573/5756491153_141535794d_z.jpg