// SR20DET Parts Galore - LOOK Inside//

[JDS Performance]

// SR20DET Parts Galore - LOOK Inside//

Email > [email protected] < Paypal send payment as a personal gift or pay the 3% fee - add in note what your paying for as well as your shipping address.

Concord, NC 28205

Email/PM me offers or to get shipping quotes / I need your City/State/Zip

All prices do not include shipping

__________________________________________________ ____________________________________________

FS: SR20 JE 87mm / 3.425in .040 over stock (86mm / 3.386in) - 8.5:1 CP Pistons

FYI Stock SR20 pistons are - 86mm / 3.386in with a 8.5:1 CP

Will work on any SR20

Used but in perfect working condition

Rings are in good shape but will need to be file fit to your block a new set can be had for $100 or less - if needed

1 piston has been banged around but nothing affects its performance

Another piston has a few scars on the skirt but again will not affect the performance

The carbon build up (not bad at all) will clean right off with whatever way you use - if you dont know any ways to remove it google search there are tons of ways to do it - I just have not had time to clean them.

These are $600.00+ new

$350.00

Download the Piston spec sheet: http://www.jepistons.com/PDFs/TechCorner/S..._instrc4032.pdf (http://www.jepistons.com/PDFs/TechCorner/SCPDrawings/piston_instrc4032.pdf)

In case you cant read the micrometer - in the first pic - it reads 3.4245 - all pistons are in the range of 3.4245 - 3.425 - this is measuring from bottom of skirt up 1/2in in an 80deg. garage

http://i82.photobucket.com/albums/j274/joshds25/DSCF0002-11.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0006-12.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0009-10.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0010-8.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0014-10.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0018-6.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0019-3.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0020-6.jpg

__________________________________________________ ____________________________________________

SR20DET Greddy Oil Pan

Painted black - can be removed easily

1 long and 1 short bolt is missing - $.50 @ hardware store

Each baffle is missing a screw as they dont line up - but they are secure and not going anywhere

Used on a rebuild that made it to idle and then the whole project was parted out.

I was going to use it on my project SR but need $ of other things

$285.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0002-12.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0001-11.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-15.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0004-7.jpg

__________________________________________________ ____________________________________________

SR20DET Redtop Valve Cover

Normal wear and tear - nothing major - great for a core on powder coating or use it as-is.

No hardware - valve cover only.

$75.00

If you want a coil pack cover add $25.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-14.jpg

__________________________________________________ ____________________________________________

FS SR20DET GREDDY / TRUST / GREX METAL HEAD GASKET

Brand New in Box

I was going to use it on m SR build but need the money for more important things

Part # 13521183
88 1.4mm

This will work on any bore size 88mm and smaller

FYI - Stock SR - Bore & Stroke 86mm x 86mm

$265.00 new from Greddy

http://www.greddy.com/products/engine/meta...er:make:Nissan/ (http://www.greddy.com/products/engine/metal-head-gaskets/filter:make:Nissan/)
GReddy (http://www.trust-power.com/06new/e2004_09/041101_greddy.html)

$215.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-12.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0010-6.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0014-8.jpg

__________________________________________________ ____________________________________________

SR20DET Front timing cover with oil pump

$70.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0032-2.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0035.jpg

__________________________________________________ ____________________________________________

SR20DET Bottom mount turbo manifold - turbo mounting stud will need to be replaced

$70.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0026-4.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0025-3.jpg

__________________________________________________ ____________________________________________

SR20DET Ignitor - came off a redtop harness

$55.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0027-2.jpg

__________________________________________________ ____________________________________________

SR20DET Coil pack harness - came off a redtop

$45.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0022-4.jpg

__________________________________________________ ____________________________________________

SR20DET tranny to motor dust plate

$45.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-11.jpg

__________________________________________________ ____________________________________________

SR20DET Flywheel - off a redtop needs resurface

$25.00 or $75.00 resurfaced

http://i82.photobucket.com/albums/j274/joshds25/DSCF0004-5.jpg

__________________________________________________ ____________________________________________

SR20DET 370cc injectors and fuel rail (no FPR)

$100.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0002-15.jpg

__________________________________________________ ____________________________________________

SR20DET RWD ARP Head Studs

1 torque cycle

$90.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0019-6.jpg

__________________________________________________ ____________________________________________

S13 Redtop SR20DET A/C Bracket

$45.00

http://i82.photobucket.com/albums/j274/joshds25/S13SRAC.jpg

__________________________________________________ ____________________________________________

S13 SR20DET T25 Turbo Lines

$10.00 each or both for $15.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0033-2.jpg

__________________________________________________ ____________________________________________

S13 SR20DET Alternator Bracket

$30.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0006-14.jpg

__________________________________________________ ____________________________________________

SR20DET Brand New Clutch & Flywheel Bolts

$30.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0012-8.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0011-5.jpg

__________________________________________________ ____________________________________________

S13 SR20DET Throttle Bodies with Auto TPS

$25.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-16.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0002-13.jpg

__________________________________________________ ____________________________________________

SR20DET Stock Crank, P/S, Alt. Pullies

Crank has small chip on A/C side - Hurts nothing - Only cosmetic

$50.00

http://i82.photobucket.com/albums/j274/joshds25/srcrankpulley.jpg

__________________________________________________ ____________________________________________


S13 SR20DET Intake Manifold (Bare)

$30.00

[JDS Performance]

bumping it up

[Uncivil240]

I need the injectors - how much ?

[JDS Performance]

I need the injectors - how much ?

How does $85.00 shipped sound - need lental caps

[JDS Performance]

List updated - prices are OBO

[JDS Performance]

List updated

[s14_sr20_silvia]

Any trades for the greddy oil pan or SR valvecover? I've got a powder coated ka valvecover, z32 vlsd... Lmk. I'm near hickory so I could pick them up.

[Oid240]

anyword on that front cover?

[JDS Performance]

Any trades for the greddy oil pan or SR valvecover? I've got a powder coated ka valvecover, z32 vlsd... Lmk. I'm near hickory so I could pick them up.

Not on the Greddy Pan but I will on a SR VC - send me some pix of the KA cover we might can work out somethig there

[JDS Performance]

anyword on that front cover?

What would you like to know? I have about 4 of them - all came from running motors

[s14_sr20_silvia]

25859

................

[Oid240]

well im about to go to tennesee for a hug show was wondering if u could help me out with a none cracked sr20 front cover aka oil pump cover

[JDS Performance]

well im about to go to tennesee for a hug show was wondering if u could help me out with a none cracked sr20 front cover aka oil pump cover

Everyone I have is uncracked - if it were cracked I would trash it!

$80.00 shipped - [email protected] send as a gift or pay the 4% fee

[JDS Performance]

25859

................

hmmm not really my style - are the letter silver or red?
What are you thinking as far as a trade on the SR cover?

[s14_sr20_silvia]

hmmm not really my style - are the letter silver or red?
What are you thinking as far as a trade on the SR cover?

Well as it turns out I powder coated it, so if you'd like I can make it any color you want and we can trade even. The letters are red right now, but I can do them in silver. Lmk.

[JDS Performance]

Well as it turns out I powder coated it, so if you'd like I can make it any color you want and we can trade even. The letters are red right now, but I can do them in silver. Lmk.

Yeah thats cool - I like gloss black with shaved off paint on the letters
I will even trade that - you gonna come to me for the trade or are we shipping?

I also have another deal for you - what is your email - I dont trust pms as mods can actually look at them.

[s14_sr20_silvia]

It's my screen name @yahoo.com

I could probably just come pick it up. Do you ever go to cars and coffee in mooresville? If you're not in any hurry we could trade there..

[JDS Performance]

It's my screen name @yahoo.com

I could probably just come pick it up. Do you ever go to cars and coffee in mooresville? If you're not in any hurry we could trade there..

I sure dont I always to busy to do anything fun :) Just let em know and no I am not in any hurry - I will be sending you that email tomorrow.

[Oid240]

How bout 100 for 2 of them shipped and u can keep the oil pumps out of them is like to have a back up I'm having problems with them cracking under the driver side bolt that goes through head

[JDS Performance]

How bout 100 for 2 of them shipped and u can keep the oil pumps out of them is like to have a back up I'm having problems with them cracking under the driver side bolt that goes through head

Make it $110 and its a deal - [email protected] - send as a gift of pay the 4% fee

[Oid240]

Alright ill hit u when I get home my address is 13446 western reserve rd Salem Ohio 44460

[Oid240]

Alright ill hit u when I get home my address is 13446 western reserve rd Salem Ohio 44460

[JDS Performance]

Send some offers I want this stuff gone!

[nep]

when are you releasing the new and improved ka24det video? bought the 5 speed swap one a few years ago and loved it. free bump :2f2f:

[blank240]

how much for just the fuel rail? lmk thanks

[JDS Performance]

when are you releasing the new and improved ka24det video? bought the 5 speed swap one a few years ago and loved it. free bump :2f2f:

I was hoping for this summer but might be winter time

[JDS Performance]

how much for just the fuel rail? lmk thanks

$35.00 shipped for a s13 SR fuel rail

[racerx2k1]

bumping it up

List updated - prices are OBO

List updated

Send some offers I want this stuff gone!

2 bump limit. You can start new thread in 3 days.