PDA

View Full Version : FL FS: BRAND NEW CP PISTONS 86.5mm 9:1

anthonyr sil8ty
05-18-2011, 02:35 PM
SOLD, mods please close. thanks guys!
florante rea
05-18-2011, 03:16 PM
So tempting....
anthonyr sil8ty
05-18-2011, 07:02 PM
So tempting....

cp w/o a doubt has got quality. it sucks b/c i have to buy another set of cp's
waxball88
05-19-2011, 12:10 PM
So your mechanist bored the block before having the pistons in hand? Sounds like you need a new mechanist.
1slicktwo4oh
05-19-2011, 12:17 PM
its spelled "machinist"....it must have been an apprentice...
BlackZenkiS14
05-19-2011, 01:42 PM
Subscribing
anthonyr sil8ty
05-19-2011, 03:02 PM
So your mechanist bored the block before having the pistons in hand? Sounds like you need a new mechanist.


thanks for your input and free bump
anthonyr sil8ty
05-20-2011, 10:25 AM
willing to throw in some new arp rod bolts for FREE if the pistons sell by monday
BlackZenkiS14
05-20-2011, 10:33 AM
Damnit :( I wont have my motor torn down by then to know if I need pistons or not.

are these +.5 over factory? my current block is bored .20 over, but I cant remember what sized piston I used, but I gotta tear it apart and see if I need new pistons.
boost addict
05-20-2011, 10:48 AM
if your bored 20 over these will fit
anthonyr sil8ty
05-20-2011, 10:52 AM
Damnit :( I wont have my motor torn down by then to know if I need pistons or not.

are these +.5 over factory? my current block is bored .20 over, but I cant remember what sized piston I used, but I gotta tear it apart and see if I need new pistons.

if your block is .20 over, then that would make your current pistons 86.5mm, stock pistons are 86mm.
anthonyr sil8ty
05-20-2011, 10:53 AM
if your bored 20 over these will fit

^what he said
BlackZenkiS14
05-20-2011, 11:58 AM
Ok, well it will be more than a week unfortunately, once I get my block torn down, I will know whether or not I will need new pistons. I currently have CP pistons in my motor as well.
anthonyr sil8ty
05-20-2011, 02:06 PM
Ok, well it will be more than a week unfortunately, once I get my block torn down, I will know whether or not I will need new pistons. I currently have CP pistons in my motor as well.

ok, sounds good
anthonyr sil8ty
05-23-2011, 07:40 AM
bump #1....
anthonyr sil8ty
05-25-2011, 03:02 PM
bump numero dos
hockeyrules
05-25-2011, 03:54 PM
free bumpppp
anthonyr sil8ty
05-28-2011, 03:21 PM
currently pending....
anthonyr sil8ty
05-29-2011, 01:29 PM
Sold, thanks guys