Huge RB25 and Misc Parts Sale!

[Mute]

All parts located in Riverside California.
All parts are brand new unless otherwise noted.
CONTACT teamgoodink [at] yahoo.com if you want a quick reply.
Local Pickup Preferred
Paypal accepted but buyer pays additional 3%.
Item prices do not include shipping.

NEW ITEM ADDED - USED HKS CAST RB25 MANIFOLD - $400 OBO

NEW ITEM ADDED - NEVER USED KKR 560 TURBO $450 OBO
Text on old site:
"One of the largest internal-gate turbos on the market
Oil-cooled, 0.84 turbine housing suits T3 size flange
Internal wastegate with 8psi actuator
Suitable for single-turbo applications on 3.0-4.5 litre engines, or in twin turbo kits on 6.0 to 7.0 litre engines
Comes with 71mm V-band section and V-band for dump pipe, T3 exhaust gasket, oil inlet banjo bolt and oil return gasket.
Specifications for KKR560core:
Compressor inlet pipe 76mm, compressor outlet pipe 50mm
55 trim compressor; inducer 61mm, exducer 82mm
Turbine wheel outlet 56mm, outer diameter 73mm"

PRICE DROP - S13/S14 600HP Stage 2 Driveshaft Shop Axles (brand new): $550

Gizzmo Phelonic Intake Gasket: $40

Rb25 OEM Headgasket: $75]

Apex-i Power FC Commander Pro Software: $200 (never registered)

Apex-i Power FC Commander (hand held controller): $150

Megan Racing Fuel Psi Gauge: $30

Apex-i ERO Flasher: $50

SPEC twin disk clutch and flywheel with pressure plate kit:SOLD
650cc Rb25 Deatschwerks Injectors: $250 (Installed but not used in actually driving) SOLD
Nismo Thermostat: $50 SOLD

http://farm4.static.flickr.com/3022/5717602022_13726a0975_b.jpg
http://farm4.static.flickr.com/3540/5717601928_88b39168fd_b.jpg
http://farm3.static.flickr.com/2757/5726906850_2467816cf1_b.jpg
http://farm3.static.flickr.com/2019/5726351313_c40b633915_b.jpg
http://farm6.static.flickr.com/5105/5726913322_c099a76c19_b.jpg
http://farm3.static.flickr.com/2761/5726911570_dd95d8b8d1_b.jpg
http://farm3.static.flickr.com/2168/5726912708_6e87616454_b.jpg
http://farm3.static.flickr.com/2043/5726912228_5fd0a99ff3_b.jpg

[street240sx]

what condition is the twin disk?

[Mute]

what condition is the twin disk?

Brand new, still in wrap...guess the photo doesn't show that very well.

[je_decoy]

whole fpr setup for $30? or just gauge?

[street240sx]

Brand new, still in wrap...guess the photo doesn't show that very well.

no the pic shows the wrap on it still but wasnt sure if it was a current pic or not

[Mute]

whole fpr setup for $30? or just gauge?

Whatever is in that picture is for the price I listed for the MR Fuel Psi Gauge.

[makeuw3t]

Hey, I sent you.an email about the injectors. Did you get it?

Thanks

[sleeper108]

injectors still for sale?

These are exactly what I'm looking for. I'll PM you now, incase you don't check this thread much

[Mute]

First person to send me either full payment through paypal (+3% paypal fee) and $10.50 within the USA for shipping or cash money in my hand gets these injectors, that's all there is to it. Email me before sending money 1st.

[ChadMcGarity]

PM me on what you have left. ill take it all for a good price. let me know.

[sileight_04]

Spec Mini Twin Still available? PM me or E-mail me at [email protected]

[Mute]

Buyer pending on clutch will contact you if I don't receive payment by tomorrow afternoon.

[Mute]

Clutch - sold
thermostat - sold
injectors - sold

[Mute]

To those I've sold to, a little feedback/rating would be appreciated

[Mute]

NEW ITEM ADDED - USED HKS CAST RB25 MANIFOLD - $400 OBO

NEW ITEM ADDED - NEVER USED KKR 560 TURBO $450 OBO
Text on old site:
"One of the largest internal-gate turbos on the market
Oil-cooled, 0.84 turbine housing suits T3 size flange
Internal wastegate with 8psi actuator
Suitable for single-turbo applications on 3.0-4.5 litre engines, or in twin turbo kits on 6.0 to 7.0 litre engines
Comes with 71mm V-band section and V-band for dump pipe, T3 exhaust gasket, oil inlet banjo bolt and oil return gasket.
Specifications for KKR560core:
Compressor inlet pipe 76mm, compressor outlet pipe 50mm
55 trim compressor; inducer 61mm, exducer 82mm
Turbine wheel outlet 56mm, outer diameter 73mm"

PRICE DROP - S13/S14 600HP Stage 2 Driveshaft Shop Axles (brand new): $550

[ledippen]

is the mani log t3 or t4?

[racerx2k1]

First person to send me either full payment through paypal (+3% paypal fee) and $10.50 within the USA for shipping or cash money in my hand gets these injectors, that's all there is to it. Email me before sending money 1st.

Clutch - sold
thermostat - sold
injectors - sold

To those I've sold to, a little feedback/rating would be appreciated

NEW ITEM ADDED - USED HKS CAST RB25 MANIFOLD - $400 OBO

NEW ITEM ADDED - NEVER USED KKR 560 TURBO $450 OBO
Text on old site:
"One of the largest internal-gate turbos on the market
Oil-cooled, 0.84 turbine housing suits T3 size flange
Internal wastegate with 8psi actuator
Suitable for single-turbo applications on 3.0-4.5 litre engines, or in twin turbo kits on 6.0 to 7.0 litre engines
Comes with 71mm V-band section and V-band for dump pipe, T3 exhaust gasket, oil inlet banjo bolt and oil return gasket.
Specifications for KKR560core:
Compressor inlet pipe 76mm, compressor outlet pipe 50mm
55 trim compressor; inducer 61mm, exducer 82mm
Turbine wheel outlet 56mm, outer diameter 73mm"

PRICE DROP - S13/S14 600HP Stage 2 Driveshaft Shop Axles (brand new): $550

2 bump limit. You can start new thread in 3 days.