clever240sx
05-11-2011, 07:09 PM
Up for sale is a 5.7 Ls1 swap for a S13 240sx chassis. The motor came out of a 1998 Camaro with just under 100k. Motor looks great! All the parts to swap the motor were bought from Daft Innovations in CA. NO i will not part anything out. It will all be sold together.
Heres what you get:
5.7 Ls1
GTO oil pan and windage tray(has to be used for this swap)
Ls1 intake manifold with injectors
Flywheel
MAF
DAFT- Engine corssmember, motor mounts, trans crossmember and mounts, 1 piece steel driveshaft, headers, earls speed bleeder for t56, earls stainless conversion lines for power steering.
Things needed to finish swap:
t56 trans, clutch, power steering pump, coilpacks. And depending on how you want to make the car run and tuning is up to you. Some people use a standalone and wire it themselves or what i was going to do, buy stock ecu and send the wiring harness to Daft to get it converted.
If anyone has any questions please email or call/text 417 225 8268
Located 15 mins south of Springfield, Mo.
Thank you
4000.00
http://i141.photobucket.com/albums/r50/clever240sx/Motor.jpg
Heres what you get:
5.7 Ls1
GTO oil pan and windage tray(has to be used for this swap)
Ls1 intake manifold with injectors
Flywheel
MAF
DAFT- Engine corssmember, motor mounts, trans crossmember and mounts, 1 piece steel driveshaft, headers, earls speed bleeder for t56, earls stainless conversion lines for power steering.
Things needed to finish swap:
t56 trans, clutch, power steering pump, coilpacks. And depending on how you want to make the car run and tuning is up to you. Some people use a standalone and wire it themselves or what i was going to do, buy stock ecu and send the wiring harness to Daft to get it converted.
If anyone has any questions please email or call/text 417 225 8268
Located 15 mins south of Springfield, Mo.
Thank you
4000.00
http://i141.photobucket.com/albums/r50/clever240sx/Motor.jpg