s13 traction arm question

[mrchomponthis]

I recently bought some Peak Performance traction rods for a very very cheap price. The problem was they didn't come with spherical ends or the spacers. The thread pitch for the spherical ends need to be 16x1.5, I am not sure what width I need and what bore size i need for the spherical ends. Also I don't know what size spacers to use. If someone can chime in and help me it would be much appreciated. Thanks.

[Jonnie Fraz]

Look at getting 16mm bore and then get high mis-alignment spacers to bring it back down to 12mm, which is the bolt size. The width I have is just under 40mm. More than likely you will need to machine the width of the spacers for fitment.

[mrchomponthis]

dang I really appreciate the help. Thanks SO MUCH!
Look at getting 16mm bore and then get high mis-alignment spacers to bring it back down to 12mm, which is the bolt size. The width I have is just under 40mm. More than likely you will need to machine the width of the spacers for fitment.