PDA

View Full Version : NC // SR20DET Parts Galore - LOOK Inside//


JDS Performance
05-09-2011, 08:08 PM
// SR20DET Parts Galore - LOOK Inside//

Email > [email protected] < Paypal send payment as a personal gift or pay the 3% fee - add in note what your paying for as well as your shipping address.

Concord, NC 28205

Email/PM me offers or to get shipping quotes / I need your City/State/Zip

All prices do not include shipping

__________________________________________________ ____________________________________________

FS: SR20 JE 87mm / 3.425in .040 over stock (86mm / 3.386in) - 8.5:1 CP Pistons

FYI Stock SR20 pistons are - 86mm / 3.386in with a 8.5:1 CP

Will work on any SR20

Used but in perfect working condition

Rings are in good shape but will need to be file fit to your block a new set can be had for $100 or less - if needed

1 piston has been banged around but nothing affects its performance

Another piston has a few scars on the skirt but again will not affect the performance

The carbon build up (not bad at all) will clean right off with whatever way you use - if you dont know any ways to remove it google search there are tons of ways to do it - I just have not had time to clean them.

These are $600.00+ new

$350.00

Download the Piston spec sheet: http://www.jepistons.com/PDFs/TechCorner/S..._instrc4032.pdf (http://www.jepistons.com/PDFs/TechCorner/SCPDrawings/piston_instrc4032.pdf)

In case you cant read the micrometer - in the first pic - it reads 3.4245 - all pistons are in the range of 3.4245 - 3.425 - this is measuring from bottom of skirt up 1/2in in an 80deg. garage

http://i82.photobucket.com/albums/j274/joshds25/DSCF0002-11.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0006-12.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0009-10.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0010-8.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0014-10.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0018-6.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0019-3.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0020-6.jpg

__________________________________________________ ____________________________________________

SR20DET Greddy Oil Pan

Painted black - can be removed easily

1 long and 1 short bolt is missing - $.50 @ hardware store

Each baffle is missing a screw as they dont line up - but they are secure and not going anywhere

Used on a rebuild that made it to idle and then the whole project was parted out.

I was going to use it on my project SR but need $ of other things

$285.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0002-12.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0001-11.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-15.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0004-7.jpg

__________________________________________________ ____________________________________________

SR20DET Redtop Valve Cover

Normal wear and tear - nothing major - great for a core on powder coating or use it as-is.

No hardware - valve cover only.

$75.00

If you want a coil pack cover add $25.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-14.jpg

__________________________________________________ ____________________________________________

FS SR20DET GREDDY / TRUST / GREX METAL HEAD GASKET

Brand New in Box

I was going to use it on m SR build but need the money for more important things

Part # 13521183
88 1.4mm

This will work on any bore size 88mm and smaller

FYI - Stock SR - Bore & Stroke 86mm x 86mm

$265.00 new from Greddy

http://www.greddy.com/products/engine/meta...er:make:Nissan/ (http://www.greddy.com/products/engine/metal-head-gaskets/filter:make:Nissan/)
GReddy (http://www.trust-power.com/06new/e2004_09/041101_greddy.html)

$215.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-12.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0010-6.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0014-8.jpg

__________________________________________________ ____________________________________________

SR20DET Front timing cover with oil pump

$70.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0032-2.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0035.jpg

__________________________________________________ ____________________________________________

SR20DET Bottom mount turbo manifold - turbo mounting stud will need to be replaced

$70.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0026-4.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0025-3.jpg

__________________________________________________ ____________________________________________

SR20DET Ignitor - came off a redtop harness

$55.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0027-2.jpg

__________________________________________________ ____________________________________________

SR20DET Coil pack harness - came off a redtop

$45.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0022-4.jpg

__________________________________________________ ____________________________________________

SR20DET tranny to motor dust plate

$45.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-11.jpg

__________________________________________________ ____________________________________________

SR20DET Flywheel - off a redtop needs resurface

$25.00 or $75.00 resurfaced

http://i82.photobucket.com/albums/j274/joshds25/DSCF0004-5.jpg

__________________________________________________ ____________________________________________

SR20DET RWD ARP Head Studs

1 torque cycle

$90.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0019-6.jpg

__________________________________________________ ____________________________________________

S13 Redtop SR20DET A/C Bracket

$45.00

http://i82.photobucket.com/albums/j274/joshds25/S13SRAC.jpg

__________________________________________________ ____________________________________________

S13 SR20DET Fuel Rail w/ caps - no injectors or FPR

$30.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0023-5.jpg

__________________________________________________ ____________________________________________


S13 SR20DET T25 Turbo Lines

$10.00 each or both for $15.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0033-2.jpg

__________________________________________________ ____________________________________________

S13 SR20DET Alternator Bracket - No tensioner bolt/nut

$30.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0006-14.jpg

__________________________________________________ ____________________________________________

SR20DET Brand New Clutch Bolts

$30.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0011-5.jpg

__________________________________________________ ____________________________________________

S13 SR20DET Throttle Bodies with Auto TPS

$25.00

http://i82.photobucket.com/albums/j274/joshds25/DSCF0003-16.jpg
http://i82.photobucket.com/albums/j274/joshds25/DSCF0002-13.jpg

__________________________________________________ ____________________________________________

SR20DET Stock Crank, P/S, Alt. Pullies

Crank has small chip on A/C side - Hurts nothing - Only cosmetic

$50.00

http://i82.photobucket.com/albums/j274/joshds25/srcrankpulley.jpg

__________________________________________________ ____________________________________________


S13 SR20DET Intake Manifold (Bare)

$30.00

JDS Performance
05-12-2011, 08:12 AM
bump bump bump

punxva
05-12-2011, 12:25 PM
bump for my old coil pack cover GLWS

JDS Performance
05-12-2011, 12:28 PM
bump for my old coil pack cover GLWS

that one is not for sale just in pix

japslapsilvia
05-12-2011, 01:45 PM
PM sent about CAS

Thanks!

japslapsilvia
05-12-2011, 02:00 PM
payment sent for CAS

Thanks!

BlackTruenoAE86
05-13-2011, 06:13 PM
Manifold heat shield shipped to TX?

JDS Performance
05-13-2011, 08:27 PM
Manifold heat shield shipped to TX?

heat sheilds sold

JDS Performance
05-17-2011, 08:06 AM
List updated!

racerx2k1
05-17-2011, 09:11 AM
bump bump bump

heat sheilds sold

List updated!

2 bump limit. You can start new thread in 3 days.