How to close pwr Window with a 12V Benchtop Power Supply?

[PeaceOnesxWai]

Hey,

Stupid me forgot to close the window and i pulled the motor out so i have no positive terminal and ECU to close my windows.. Anyone know how to use a Power Supply to power the window so i can close it?

[iLagX]

just have 2 wires connect the positve and negative battery. tap it to the window motor 2 wires.

[louisdaboois]

lol, did the same thing. If you take the door panel off, you'll see a 2 wire, black plug. The wires should be black and blue, iirc. Then, just use a battery and hook power and ground to each one with scrap wire. If it goes the opposite way than you want just switch terminals. and viola!

[PeaceOnesxWai]

Are you guys talking about the switch on the driver side or the window motor itself?

[KiLLeR2001]

On the window motor itself. Unplug it and there will be two prongs. Find a way to touch a positive and negative wire on each prong without touching the wires together. It will either roll up or down. If it rolls down switch the wires around and it will roll up.