1jzgte 240sx update

[curbsurfer]

were almost done with the 1jz 240. here is a pic.
weve found that a rhd s13 throttle cable fits perfectly.
the shifter sits about 1.5 inch more forward. will modify the shifter to fit perfect.
the heater core fittings hit the rear turbo intake. will notch intake to fit.
besides that, it was a good fit. there is about 4.5 inches of clearance between the steering shaft and engine. much better than the 1/4 inch sr guys get.

[mrmephistopheles]

well, if nothing else, i like your taste in BOVs.

[DRFT]

Looking good in the neighborhood:cool:

[hondaguy]

i've gotta give props where its need,thats one mighty fine set up

[aznpoopy]

looks clean and clear :D

[Dousan_PG]

so when you guys going to let me drift that beast? i cant wait! :)

[West]

Looks sweeeet! :drool:

What plans you have for the Turbo/Turbos?

[curbsurfer]

on the turbos, were just going to leave the stock ones on for now. they start to come apart past 14lbs so that will be the limit.

dousan, i would let you drift it but i actually sold it. you might have to pry the keys away from the new owner.

were looking at about a month before it is up and running correctly.

[DudeYourSoOOJDM]

Doooooood.....That is SooOOOOOoooo JaaaaayyyyyDEEEEE EMMMM...

I smelled the sheep dog BOV......it didn't smell much like JDM.

Mario-san and the Rocafella JZSX....coming soon to meet all of you (in socal at least).

[pSY trek]

How bad was the wiring?
-Stanley

[curbsurfer]

pretty simple so far

[citizen]

Can you comment on weight balance with it in?

[Zemus]

How much did u sell it for

[hattenDriftR1]

I bought it for a lot of money...hehe. Technically I bought the car and a whole bunch of other crap, then traded my SR and some minor stuff for the 1JZ. Now I'm too broke to buy Tein HE's and tension rods. Arghhhh...no drifting for me for a while. DAMN IT!!

Aaron, you can drift it when you buy me Tein HE's. Aight. Cool we have a deal.

[goofynick6]

What were the major modifications to make it fit? Using the stock harness and ecu with it?

How's the exhaust working out being on opposite side of stock? I was really considering this option a little while back.

Nick

[curbsurfer]

on the weight. the car actually sits a little higher than it did with an automatic ka24e. so i guess it actually may be lighter in front. the tranny is pretty big so it probably move some weight to the back.

i used to do exhaust for a living so i will build a custom exhaust that crosses over to the other side. i am also building a sweet downpipe/y-pipe for it.

the only major mods are the custom motor mounts. you need to get a front sump aristo oil pan to fit in the crossmember. also, a small notch needs to be made on the shifter hole. as the shifter sits a little forward.

i am using a stock 1jz harness and ecu.

[DudeYourSoOOJDM]

and it will have working p/s and A/C.....frosho

[curbsurfer]

the car is running and it is f-ing fast.

will have videos up soon

[DRFT]

nice...any side ways action on it?

[DSC]

Thats sick! We need more pics, vids, and details. dyno numbers coming soon right?

[curbsurfer]

no real sideways action yet, the susp. needs some love first. hopefully the owner will post some more pics up. we have a video that has yet to be uploaded.

[the240sxer95]

wow! dope dope :) intresting swap

[Advan]

I have no knowledge of that engine. I have little knowledge about engine swaps, but I've never heard of a 1jz engine(correct me if I'm wrong). So could someone explain to me whats so good about this engine?

[GoKu]

Advan ...that is a 1st generation Toy Supra....


curbsurfer ....sell out

[GoKu]

^^ only sarcism there ...dont take it personally ..guess differnt strokes for differnt folks....I would have stay within the Nissan family ,either way ..good luck

[Ryan of Velocity]

You farksticks! I thought I was going to be the only one on here with a Toyota powered Nissan. lol. Nice job. The 1JZ's bang-for-your-buck factor is ideal compared with Nissan in-line-six choices. Maybe I'll be the only IJZ Z32. Probably won't last long though. lol.

[SittinOnDubsWGW]

the 1jz Z32, looked like an awesome project. It'll be cool to see it all done.

[Ryan of Velocity]

the 1jz Z32, looked like an awesome project. It'll be cool to see it all done.

It would get done alot faster if I would get off my lazy ass and get to it :fruit: