PDA

View Full Version : CA FS: 4.625 ring and pinion for r200 diff


UNISA JECS
05-05-2011, 09:08 PM
Just what the title says.

Condition: very good, no chips, broken gear teeth or misalignment

Includes everything shown in picture below


Price $240 paypal/shipped within USA
was $300
pm me for international shipping quote

37:8 (4.625 final drive)
Ring gear bolts - 12mm thread with 12mm shank

Pictures

http://i167.photobucket.com/albums/u159/zilvia_album/100_1403.jpg

http://i167.photobucket.com/albums/u159/zilvia_album/100_1404.jpg

UNISA JECS
05-08-2011, 11:17 PM
New Price $240 paypal shipped if you want insurance on the part add $5.00

roboticnissan
05-08-2011, 11:25 PM
Dang I want this....just too broke right now.

UNISA JECS
05-09-2011, 07:57 PM
Dang I want this....just too broke right now.

You got a pm

TheGrim
05-11-2011, 02:14 PM
did that come off a open diff set or a vlsd diff set?

UNISA JECS
05-11-2011, 02:26 PM
did that come off a open diff set or a vlsd diff set?

Open differential set but it doesn't make a difference the ring and pinion is the same between both types VLSD vs open

TheGrim
05-11-2011, 02:41 PM
Open differential set but it doesn't make a difference the ring and pinion is the same between both types VLSD vs open

the size of the bolts is different between the open and vlsd carriers. vlsd ring gear bolts are larger than an open units ring gear.

what car did this come from? stock final drive on US 240sx is 4.083

UNISA JECS
05-11-2011, 02:45 PM
the size of the bolts is different between the open and vlsd carriers. vlsd ring gear bolts are larger than an open units ring gear.

what car did this come from? stock final drive on US 240sx is 4.083

Thats just the bolts though (it doesnt matter VLSD vs Open) which can be replaced with the appropriate size shank you may need depending on your differential.

This ring and pinion set I have for sale 12mm thread with 12mm shank bolts.

I should add a little more info:
Couple things you should know:
Differential ring gear bolt sizes:
Part # 38102-12S00
S13 - 12mm thread 12mm shank from 07/88 - thru
S14 - 12mm thread 12mm shank from 02/94 – 12/96
J30 - 12mm thread 12mm shank from 01/92 - 12/96
Part # 38102-10V00
S14 - 13mm thread 13mm shank from 12/96 – up
Z32 - 13mm thread 13mm shank ALL
Z33 - 13mm thread 13mm shank ALL
Q45 - 13mm thread 13mm shank 90-96
J30 - 13mm thread 13mm shank 12-96
Part # 38102-RS500
S15 - 12mm thread 13mm shank HLSD
Now some people might wonder what the point of all this, well if you know what differential you have then you know what size ring gear bolt your differential uses, and if you know that then you know what ring and pinion combo's will work for you and or you buy the correct ring gear bolts for your special application,
Based on the application list above the only combo that will require enlarging of the diffrential bolt holes would be if your using a 12mm thread 12mm shank differential with a 13mm ring and pinion set. There is just no way around that.

UNISA JECS
05-14-2011, 10:47 PM
5mph bumper

racerx2k1
05-15-2011, 09:02 AM
New Price $240 paypal shipped if you want insurance on the part add $5.00

You got a pm

5mph bumper

2 bump limit. You can start new thread in 3 days.