Steering Angle Spacers! $50 shipped.

[maverickmotorsports]

IN STOCK AND READY TO SHIP!

Hello Zilvia! I just got another run of these. Same price as before. These sell quick so buy asap!

These spacers easily add more angle to your steering! Check out the pictures below.

http://img.photobucket.com/albums/v229/sil8ty/IMG_5038.jpg

http://img.photobucket.com/albums/v229/sil8ty/IMG_4367.jpg

- Use on S13, S14, S15, Z32, R32, R33, Z33, G35, and probably a ton more Nissans.
- Machined from 4130 Chromoly
- Adds ~14º to your steering!
- CNC machined by a medical/aerospace certified machine shop
- Easy install. Re-center the rack after you install these.


Price: $50 Shipped.

You only need 1 per car. INSTALL ON PASSENGER SIDE.

I can ship international. PM me or email [email protected](dot)com to order.

INSTALLED PICS!

I took some pics of my daily driver. ONLY ONE SPACER INSTALLED.

Alright. Finally got one of these on my daily driver. S13, stock suspension, stock steering.

BEFORE: 37º of steering angle stock.
http://img.photobucket.com/albums/v229/sil8ty/IMG_5106-1.jpg

AFTER: 51º of steering angle after adding only ONE spacer!
http://img.photobucket.com/albums/v229/sil8ty/IMG_5122copy.jpg

Added 14º of steering lock. You can grind down the steering stops and get even more.

I have a lot of people that can vouch for me. I'm also a moderator on az240sx.org so you guys can find me on there as well. Thank you for looking.

[HS13KLS]

On my s14 I had to take them off. I was using z32 inners, CS outters and PBM spacers.

WAY too much angle. and I had hella toe! Took off this spacer and everything was fine.

This does not go without saying I had insane angle, (rim was hitting the tension rod) at lock. even still with the z32 inners I had to take about 5-9 threads so I could correct my toe. - This was just my experience with them.

I hear they work great with all stock stuff though.

[maverickmotorsports]

Wow! I wonder if the CS outers are longer and force the car to have a lot of toe? With Z32 inners/stock outers you can run one on each side.

[troskinatior]

Can put regular spacers on these too?

[TheRealSy90]

It's probably been asked before im sure but, how does it get the same amount of angle both ways with only one spacer? I have 9mm spacers on both tie rods already, how will that affect it?

[clay9110]

U have to recenter the rack for it to affect both sides correctly.

[MrFairlady]

Ok so S13 with S14 LCA.....Z32 Tein Inners (w/ small spacer) and SPL outs.

Will that have any effect at all or these can be used with anything?

[battlescar]

what is your paypal? and would you recommand to have this and spacers on?

[maverickmotorsports]

It's probably been asked before im sure but, how does it get the same amount of angle both ways with only one spacer? I have 9mm spacers on both tie rods already, how will that affect it?

This is similar to adding one big spacer to the steering rack. You end up with more rack travel which means more angle.

Ok so S13 with S14 LCA.....Z32 Tein Inners (w/ small spacer) and SPL outs.
Will that have any effect at all or these can be used with anything?

Depends on the SPL kit you have(the one for stock or modified knuckles). Should work but you might need to trim the pass side inner tie rod.

what is your paypal? and would you recommand to have this and spacers on?

The threads are long enough that you could slip another spacer over this spacer....if that makes sense? haha

PM'd you the paypal info.

[maverickmotorsports]

I've had a few people ask me how to re-center the steering rack and here is a short write up.

You put the spacer on the passenger side of the steering rack. Your rack now has extra travel but it's all biased to the passenger side(because of the spacer). In order to have equal alignment you need to center the steering rack.

This is done by turning the steering wheel lock to lock. Then you divide the total turns by 2. Now, from lock you rotate the steering wheel that much(ie: 3 turns lock to lock = 1.5 turns from lock to center). Once you have found center of travel simply realign the toe and you're all set.

Hope this clears up any questions. It's really simple to do and takes 30min-1hr at the most to install a spacer.

[twinspool]

what's your paypal info so I can get one of these?

[k0013]

Ok, i will be the elephant in the room: so what happens if you install one spacer on each side.

[TheRealSy90]

I've had a few people ask me how to re-center the steering rack and here is a short write up.



Hope this clears up any questions. It's really simple to do and takes 30min-1hr at the most to install a spacer.

Damn it all makes sense now haha, thanks.

[maverickmotorsports]

Down to about 10 of these. They are selling FAST!

[battlescar]

money sent!

[Rock´n Rolla]

how about if i put those spacer on each side. . . with stock Inner and outer rods ?? s14

[maverickmotorsports]

how about if i put those spacer on each side. . . with stock Inner and outer rods ?? s14

You'll have too much toe in. You will need Z32/Z33 inners if you want spacers on each side. I also don't recommend spacers on each side with stock knuckles. You will over-center before you run out of travel. This is not the case with 1 spacer though.

[maverickmotorsports]

ONLY 5 LEFT!

Going fastttttttt!

[NISR20MO]

PM me with payment info please. I'm ready to buy!

[maverickmotorsports]

All PM's replied to! Thank you guys for your continuing business.

[motorsporttc]

Money Sent!!!

[motorsporttc]

Have these been shipped out yet? have't seen a tracking number

[maverickmotorsports]

They were shipped earlier today. USPS doesn't provide tracking on smaller packages and their system sucks anyway.

Sorry it took me a while to ship out. I have a regular day job and sometimes I can't get to the PO before they close.

[motorsporttc]

No Problem just wondering if they were shipped can't wait to install

[maverickmotorsports]

Just got another batch of these IN STOCK! Last time I sold out in less than a week so don't miss out.

Please PM me or email me to place an order.

[Audio Puppet]

how often do you get the steering angle spacers in?

[motorsporttc]

Besides the OP just wanted to see if any customers have a review of these that purchased them? I received mine just haven't had time to install

[maverickmotorsports]

how often do you get the steering angle spacers in?

I will keep them making them as long as people still want to buy them. I usually make runs of 20 or 40 and they sell out really fast. I currently have ~35 in stock.

[WYT R1CE]

Do you still have any? I will paypal now.

PM me.

[Audio Puppet]

Can you PM me. I want to see if you have any left and you paypal info

[WYT R1CE]

Been waiting 3 weeks for mine...

[SoCalDrifter]

if you have any pm me ill take one

[JDM_Tuner]

Ill take one asap if you have one instock?

[driftthis]

Got mine - good looking product.

[rics*project*s13]

Do u Still have them

[battlescar]

ok i've been waiting for it for 2 months now, i paypaled you on may 11th. if u don't have it just return me the money.

[maverickmotorsports]

ok i've been waiting for it for 2 months now, i paypaled you on may 11th. if u don't have it just return me the money.

Yours shipped out a while back. It must have gotten lost in the mail or the address was incorrect.

Can you PM me your address and I'll get another sent out today. Sorry for the troubles.

[JDM_Tuner]

i just got mine in the mail, they look very well made. thanks again

[articdragon192]

Stilll have some in stock?

[maverickmotorsports]

Stilll have some in stock?

Yep, plenty in stock. :)

[ATLspeed]

Quick question

After recentering the rack, doesn't that cause the steering wheel not to be "centered". Its not that big of a deal, just would feel weird with the face of the steering not being original. Won't be hard to unbolt the steering wheel and adjust it then bolt back on.

[maverickmotorsports]

Quick question

After recentering the rack, doesn't that cause the steering wheel not to be "centered". Its not that big of a deal, just would feel weird with the face of the steering not being original. Won't be hard to unbolt the steering wheel and adjust it then bolt back on.

You are correct, the steering wheel will need to be re-centered as well. It's a quick job though.

[Purestock240]

have a pic of one installed?

[maverickmotorsports]

have a pic of one installed?

Yep!

http://img.photobucket.com/albums/v229/sil8ty/IMG_5120.jpg

[JDM_Tuner]

Here the spacer on my s14, inners and outers are just plain stock.
http://i645.photobucket.com/albums/uu174/JDM_Tuner/9fdaaaac.jpg

[maverickmotorsports]

Thank you for the picture!

I'm running low on these spacers so if you guys want some order now! :)

[maverickmotorsports]

Bump!
It's friday!

[Matej]

You have already stated that installing two would cause the rack to be too long, however, would you by any chance happen to know if it would be possible to install one on each side if I have S14 lower control arms on an S13, with everything else stock? The S14 FLCA is about 15mm longer, so the tie rods make use of a lot less thread, and this seems like it would be a great way to correct it and be able to thread in the tie rods more again.
I know one just one would work great also, but I like symmetry, and I do not want to recenter the rack. :)
Cheers.

[s-13 noob]

i was wondering. will these work fine with the z32 inner and spl outer tie rods? or will it get too much toe?

[Audio Puppet]

sent you a e-mail. let me know if you got it

[Jangger]

Still have this in stock ?

[silver04rsx]

Would like one of these. Let me know. Thanks.

[DEMo]

My lock to lock is like 3.25 turns with this. Is this normal?

[SERUM]

Are these still available?

Interested.

[laocivic]

im wanting some as well? Ge?orge where u at

[Black240Ct]

You have already stated that installing two would cause the rack to be too long, however, would you by any chance happen to know if it would be possible to install one on each side if I have S14 lower control arms on an S13, with everything else stock? The S14 FLCA is about 15mm longer, so the tie rods make use of a lot less thread, and this seems like it would be a great way to correct it and be able to thread in the tie rods more again.
I know one just one would work great also, but I like symmetry, and I do not want to recenter the rack. :)
Cheers.



Im doing some searching on this but havent found any info on ppl who have done this so ill toss up some pics and info..

I just got two of these spacers.

I modded my LCA with heim joints.. they are a bout 5mm longer then s14 length.
I also have PBM angle kit.
http://distilleryimage1.s3.amazonaws.com/513e4b8e835311e1989612313815112c_7.jpg

http://distilleryimage7.s3.amazonaws.com/9d7a1d6c896511e1ab011231381052c0_7.jpg

When i installed the LCA i didnt feel comfortable with the thread length i had between my inner an outter tie rods., with like 1/2 inch threaded i was still way towed out.

So my buddy had two of Georges spacers that he wasnt using. i got those and tossed them on.. i now had plenty of threads between inner and outter with an 'eyed out' alignment..

http://distilleryimage2.instagram.com/c6d2d9a68bd111e1a87612313804ec91_7.jpg

http://distilleryimage0.instagram.com/460d25b08bcc11e1b10e123138105d6b_7.jpg

my caster and camber need to be reset, this week ill be getting it on the alignment rack and then some testing with two of georges spacers installed.

* im was user Tein s14 inner/outter with the slip on spacing rings.
now i just have the inner/outter with two of george's spacers..

[sterlinge]

Do you still sell these?

[MR_GUTTI]

I need one too!!!