TD06 20G Turbo - Ceramic coated - HKS actuator - custom flanges

[s14unimog]

I've decided to take the build in another direction this time and so the 20G is up for sale. Everything you see in the pictures is included except the AN fittings for my lines. The actuator is an HKS 1 bar unit with a custom bracket. The turbine housing has been professionally ceramic coated inside and out. The CHRA has been painted with a 1000* high temp paint. I cut and removed both heat shield mounts from the compressor to clean up the look. I've also machined a pair of flange adaptors, that will be included, from 6061 aluminum. The turbine housing is drilled/tapped 1/8-27 NPT for my EGT prob but I will provide a plug to the new owner. There is no excessive shaft play and the turbo never leaked a drop. I ran this turbo for 2 seasons without any issues and made over 400whp on a stock bore SR20. This is a direct bolt on replacement for any SR T2 bottom mount manifold and uses factory gaskets. If you have any questions, let me know.

I will ship this inside the great 48 for free.

price: $800

http://img.photobucket.com/albums/v721/s14unimog/Parts%20FS/FPTD0620G009.jpg
http://img.photobucket.com/albums/v721/s14unimog/Parts%20FS/FPTD0620G004.jpg
http://img.photobucket.com/albums/v721/s14unimog/Parts%20FS/FPTD0620G005.jpg
http://img.photobucket.com/albums/v721/s14unimog/Parts%20FS/FPTD0620G008.jpg

[s14unimog]

bump to the top please.

[Boostoff]

How would this run on a RB25?

[gman-s14]

Is this a forced performance turbo..

[s14unimog]

How would this run on a RB25?

I'm sure it has PLENTY of capacity to supply an RB25. I know these turbo's can easily handle over 25psi

Is this a forced performance turbo..

yes. This is a forced performance turbo.

[s14unimog]

This is a killer deal guys, I've got an extra $300 in parts bolted to this puppy. They're just over $900 new and FP isn't carrying them anymore.


2nd bump.

[aaronbaird]

wow do want. price shipped to 37013?

[s14unimog]

^ shipping is free buddy! $800 and it'll be packaged well and sent to you via UPS ground with a tracking number.

Let me know!

[HYPNOTIK]

BUMP for a badass turbo, I'm running the same one.

[Cash]

I'm considering upgrading from my 2871, and this is a great deal. This turbo looks very clean. Any idea approximately how many miles are on it? I'm somewhat local, so I could come check it out and pick it up to avoid shipping. Would you considering taking $20 or so off the price if you don't have to ship? :)

[supra_speed]

Any dyno charts?
What was the spool like?

[khoadogg]

direct bolt on replacement? in stock bottom mount location?

[s14unimog]

Any dyno charts?
What was the spool like?

It spools very nicely if you run it @ 1bar and above. This is definitely not for those looking to stay in the mid/low 300's. It's really going to depend on your setup too.

direct bolt on replacement? in stock bottom mount location?

Yeah, its a direct bolt on replacement. Here is a picture of my assembly. the only modification required is that you might need to shave about 3/16" off the driverside mount to clear the compressor housing. I say might, b/c I'm running a Tomei Expreme and they might have slightly different positions than stock.

http://img.photobucket.com/albums/v721/s14unimog/TurboReinstallation004.jpg
http://img.photobucket.com/albums/v721/s14unimog/TurboReinstallation006.jpg
http://img.photobucket.com/albums/v721/s14unimog/TurboReinstallation012.jpg


Here is a video of the car running @ 18 psi - 3rd gear runs.
http://www.youtube.com/watch?v=gVtrP-82KvQ

[Terminus2k]

This thing is nasty. excellent bolt on turbo that will make good numbers.
Someone will be very happy with this on their car.
GLWS!!

[HYPNOTIK]

I just got my car retuned with this same turbo, 425 to the wheels @ 19psi.
http://i302.photobucket.com/albums/nn87/SkylineGT_01/S15dyno-1.jpg

[GUNMETALV35]

Who makes this?

[s14unimog]

^ Forced Performance Turbochargers

[GUNMETALV35]

^ Forced Performance Turbochargers

:picardfp:

Sorry, I just re-read the other postings. Didn't mean to be "that guy"