PDA

View Full Version : CA 17x9.5+13.25/17x10.5+18.25 bbs rs 5x100/114


soobieninja02
05-03-2011, 01:08 AM
selling my bbs rs. wheels started off as 17x7 et.45 and 17x8 et.50. then 2.5" lips were added to all four wheels wheels are dual 5x100/114. final sizing is:

f:17x9.5+13.25
r:17x10.5+18.25.

The only thing wrong with the wheels is the valve stem seals need replacing and little indications of wear and tear. wheels are currently off the car and being cleaned. $2800obo wheels only.

http://farm6.static.flickr.com/5268/5655548336_63ee438729.jpg[/URL (http://[URL]http://www.flickr.com/photos/[email protected]/5655548336/)]

http://farm6.static.flickr.com/5142/5654976823_4255dacec5.jpg[/URL (http://[URL]http://www.flickr.com/photos/[email protected]/5654976823/)]


http://farm6.static.flickr.com/5061/5655548486_bb60d01ccb.jpg[/URL (http://[URL]http://www.flickr.com/photos/[email protected]/5655548486/)]

sw20>>s14
05-03-2011, 02:54 PM
every euro guys wet dream right there...bump for some sick wheels...

95KA-Turbo
05-03-2011, 03:12 PM
How'd you figure out your sizes?

My wheels were originally 17X7/8 +45/+50

They should have had 1/2 inch lips originally.

17X7 breaks down to a 6" barrel, 1/2" face, and 1/2" lip.

Adding a 2.5" lip would be 6+0.5+2.5 = 9

Like wise the rear would be 7+0.5+2.5 = 10

Your sizes should be 17X9 +20 and 17X10 +25

I use the wheel offset calculator to get the offsets:

http://i54.tinypic.com/2w4y905.jpg

http://i51.tinypic.com/a3jw9e.png



GLWS though, very nice looking wheels!

timmy0tool
05-04-2011, 08:02 PM
^ you are correct sir! i did the calculations for him and didn't know to take into the account the 0.5" of the standard lips and 0.5" of the face. he just told me he added 2.5" to the wheel. good work!

JN1AS44
05-04-2011, 10:24 PM
Knoop is the man!

95KA-Turbo
05-05-2011, 10:20 PM
^ you are correct sir! i did the calculations for him and didn't know to take into the account the 0.5" of the standard lips and 0.5" of the face. he just told me he added 2.5" to the wheel. good work!

No worries, you're spot on for some 3" lips.

In case any 240 guys are wondering you could "easily" take the lips off of these, sell them online, and buy some 3.5" lips and have some 17X10/11 +7/+12 like I had :w00t:. The 17X7/8 +45/+50 are pretty hard to find now-a-days. The last set I saw on Yahoo japan was like 1k BIN, so that's not even factoring in shipping/new lips/refinishing expenses/time/etc so these aren't priced too bad. GLWS.

Buc-town
05-06-2011, 01:39 AM
Whoa, BBS made these in 17's? I've always thought and seen only 16's, nevertheless, my favorite OG wheels ever :hsdance:

soobieninja02
05-13-2011, 05:13 PM
^^^you should buy them.

S13_180SX
05-19-2011, 04:10 AM
How much to ship to 95139?

Buc-town
08-30-2011, 12:53 AM
^^^you should buy them.

It won't look right with my RX-8.