PDA

View Full Version : Ka24e no start/no crank help plz!!!!


JDM_PILOT
04-27-2011, 10:27 PM
hey whats up. i had a 89 hatch (ka24e). it overheated and i put a new head gasket. an after wireing evrything back uup. it wont start or crank. the dash lights dont even come on. i checked the fuses. and evn replaced a 15 amp fuse under the hood in the fuse box. i really need my car (http://zilvia.net/f/#) running asap this is my daily. the battery is good to yes. point me in a direction please taking all sujestions!. thanks

nismonismo240sx
04-27-2011, 10:32 PM
Most likely an electrical issue. Look thru all the wiring that you worked on...check the rest of your fuses. A blown fuse will probably lead you the right way. Good luck.

JDM_PILOT
04-27-2011, 10:44 PM
yaa o checked the fuses. but still no luck. how far are yu from me? you think you could ocme help help if i pay u for your time?

nismonismo240sx
04-27-2011, 10:52 PM
I'm sorry man, I'm not that good with electrical. And I'm about an hour or so away.

godrifttoday
04-27-2011, 10:55 PM
Most likely it's the blue relay... I looks like 2 relays attached to one. I believe it's in your passenger engine bay side... And another thing check your ground for your starter. Did u put the ground back in which is attached from the intake manifold ( by the throttle body) to the chassis?

JDM_PILOT
04-27-2011, 10:59 PM
yaaa i put that 1 back. and put it back to. how would i check the blue relay?

JDM_PILOT
04-27-2011, 11:01 PM
hmm i dont think i did the 1 by the throttle body. is that the little black ground wire?

JDM_PILOT
04-27-2011, 11:25 PM
where do i ground it to?