LOOKING for NISTUNE Specialist in SOCAL area !

[dkwasherexd]

My girlfriend needs a base map burned onto her blank ecu nistune board. She has a drift event this saturday, so we need help asap.

Shes running sr injectors, t-28bb turbo, fmic, stock maf, fuel pressure regulator, s14ka ecu/with blank nistune on a stock KA engine. We are planning to run low boost 6psi. We need a base map burned onto the ecu so our tuner from Sp Engineering can tune it.

Please help, I will bring beer, and some cash for your help ! We are from the 626 area, so if your local that would be awesome!

call 3107337932

her name is Denise

[kiss my bumper]

check out "the viper shop" great shop in colver city.

[Vatche]

i had a nistune board soldered onto my stock sr ecu and i ran it for a few weeks , if its not tuned it should run stock base map until you tune it, i dont know if that helps

also i was referred to chris jensen at DC Performance who does Nistune. I ended up going with power FC though. they have a good reputation too.

[articdragon192]

SpecialtyZ in the Valley.

[bardabe]

SpecialtyZ in the Valley.

Seb does not have a Base Image Burner, they are excellent tunners, but don't have the Base Image Programmer.. her best bet is going to be to ship it to Autovaunghn performance, then take it to Specialty Z and have em tune it.

[DALAZ_68]

or just go to Chris Jensen at DC performance...he's certified in this...so might as well go...and hes not to far...

[bardabe]

Yeah Chris @DC has a Base Image Programmer and can do it i completely forgot about him.

[handinpants]

definitely chris @ dc performance he's certified by nistune. they have a clean shop, always filled with nice cars too