Tons of aftermarket and oem parts! S13, s14, s15...come take a look!

[Imarvin240]

OLD THREAD...CHECK FOR MY NEW ONE!




ONLY THE ITEMS LISTED ARE FOR SALE...IF I DIDNT LIST IT, DONT ASK IF I HAVE IT

Bride RHD S14 FRONT Floor mats
- NEVER USED
- PERFECT SHAPE
- $260

Peakboost Downpipe
- Roughly 500 miles
- PERFECT SHAPE
- $100

Turbosmart Megasonic BOV
- Roughly 1k miles
- PERFECT SHAPE
- $200

S13 SR Transmision
- Roughly 30k miles
- PERFECT SHAPE
- $150

Kouki Tail Lights
- NEVER USED PERFECT SHAPE
- $300

S15 Hoods
- NEVER USED
- $250 each

RC 1000cc Top Feed Injectors
- NEVER USED
- $350

Kisuu Custom Made Billet Top Feed Fuel Rail
- NEVER USED
- $200

T3/T4 SR Exhaust Manifold That a Friend Made Me
- NEVER USED
- $225

S14 Non-ABS Driveshaft
- Used
- $125

S14 ABS Driveshaft
- Used
- $125

ETS Custom Made Intercooler 24X8X3
- NEVER USED
- PERFECT SHAPE

S14 SR20 88.5mm Cometic Metal Head Gasket multilayer
- NEVER USED
- PERFECT SHAPE


These are all the make an offer items...i dont want or need them all so just make an offer...

S13 SR OEM Coil Pack Cover
BNIB SR Multi Layer Exhaust Gasket
BNIB OEM SR Exhaust Gasket
SR OEM Exhaust Manifold w/ Heat Shield
Valve Cover Gasket
Valve Cover Coil Plug Gasket
Water Outlet
Water Inlet
(4) Cam Oil Tubes (2 Sets)
(16) OEM Spring, Retainer, and Keeper (1 set)
(8) SR OEM Intake Valves (1 set)
(8) SR OEM Exhaust Valves (1 set)
(8) SR OEM Rocker Arm (1 Set)
(8) SR OEM Lifter (1 Set)
SR Block (bare) w/ 87mm bore (needs align bore...roughly 200 at any machine shop)
SR20 Front Cover w/ Oil Pump
(2) Oil sandwich plate Galley w/ sensor
(2) Upper Oil Pan
(2) Water Pump
Water Pump Pulley
(3) Rear Crank Case Cover
Crank Pulley
(4) SR Oil Squirters (1 Set)
(3) SR OEM Rod
(4) Upper Oil Pan Screen (2 Sets)
(3) Different SR20 Timing Chain Guides
(2) SR Timing Chain Tensioner
(2) SR Main Cap Girdle
(2) Alternator Bracket
SR Coolant temperature sensor sub harness...SOLD!!!
AAC Valve
(3) Knock Sensor
(3) Coolant Tubes
(2) Thermostat Housing
(2) Coolant Temperature Sensor Housing
3” S14 Exhaust that was very hacked up but it has a Very good condition HKS muffler
Turbo Blanket (was on a T67)
SR Transmission Plate
SR OEM Turbo Lines
S13 Rear OEM Chamber Arm
S13 Rear OEM Traction Arm
S13 Rear OEM Toe Arm
stock KA24de fuel pump (in working order)
stock KA24de header + stock heatsheild
stock KA24de airbox intake system and Filter is still clean


FWD SR20de- If you need any parts for a fwd sr20de, let me know…im sure I’ll have them.

PHOTOS!...i will add more pictures later this week

http://a2.sphotos.ak.fbcdn.net/hphotos-ak-snc6/180681_10150091810826754_526896753_7224552_4632343 _n.jpg

http://a4.sphotos.ak.fbcdn.net/hphotos-ak-ash2/149529_10150091810821754_526896753_7224551_6197177 _n.jpg

http://i590.photobucket.com/albums/ss347/matt11145/Decorated%20images/TONSofpartsforsaleTons008.jpg

http://i590.photobucket.com/albums/ss347/matt11145/Decorated%20images/carparts011.jpg

http://a7.sphotos.ak.fbcdn.net/hphotos-ak-ash1/180863_10150140347491754_526896753_7988667_2649740 _n.jpg

http://i590.photobucket.com/albums/ss347/matt11145/Decorated%20images/mattscar020.jpg

http://a3.sphotos.ak.fbcdn.net/hphotos-ak-snc4/74257_489055006753_526896753_6996461_468437_n.jpg

[CrashRacer86]

I'm not seeing the seat harness's or the short shifter up on the list but see a pic, am I to assume they are not for sale?

[lightsource]

where are you located?

[blake110491]

How much for the turbo blanket?

[sviellvoicae]

That manifold is not custom made. Thats ebay

[NIZzS13]

The coolant tube are they the brass Ones under the intake or the one that goes behind the block or both? And for witch sr 13 or 14?

[monaS14.5]

picture of the kouki tails

[s13 4rey]

kouki lights picture front and back (cash in hand) 949-566-4260

[Imarvin240]

I'm not seeing the seat harness's or the short shifter up on the list but see a pic, am I to assume they are not for sale?

yeah, they were sold in a previous thread...sorry man

where are you located?

around exton/west chester/downingtown, PA

How much for the turbo blanket?

make me an offer

That manifold is not custom made. Thats ebay

okay...im usually a really calm person, but you have got to be kidding me. look at what i have for sale before you make a comment like this to me...i have RHD floor mats that had to be imported, custom made fuel rail, custom made intercooler, in the last thread a had a full mazworx sleeved sr20 and a modified greddy intake manifold for a 90mm throttle body...i dont go cheap and i dont buy ebay...so dont ever call that stuff ebay again. if you have anymore questions about it, you can PM me and i will be happy to answer them or i can give you the number of my friend that made it. next time though, use that brain of yours and dont bash someones thread...comments like this are delt with much better through a PM.

The coolant tube are they the brass Ones under the intake or the one that goes behind the block or both? And for witch sr 13 or 14?

they are the ones under the intake manifold. they are for an S13.

kouki lights picture front and back (cash in hand) 949-566-4260

picture of the kouki tails

i will PM you both

[slideslidegnarslide]

S13 kouki tails?

[tx240ss]

pix of downpipe? does it have the flex joint? is it for a top mount or bottom mount?

[smelly240]

I think your friend ripped you off on that exhaust manifold... I would confront him, because he didnt make that.

[NAVY-ET]

ya that's a eBay mani
ill give u 60 shipped

Sent from my Desire HD using Tapatalk

[Imarvin240]

S13 kouki tails?

nah, only S14 kouki tails guys

pix of downpipe? does it have the flex joint? is it for a top mount or bottom mount?

I'll PM you and no, it doesnt have the flex joint and it is for top mount

I think your friend ripped you off on that exhaust manifold... I would confront him, because he didnt make that.

ya that's a eBay mani
ill give u 60 shipped


guys, he works for a metal fabrication facility...i was there when he made it so i know for a fact that he cut and welded it together (the only part he didnt make was the collector before the T3/T4 flang). i will repeat my previous statement that i said when someone said a comment like this up above.

okay...im usually a really calm person, but you have got to be kidding me. look at what i have for sale before you make a comment like this to me...i have RHD floor mats that had to be imported, custom made fuel rail, custom made intercooler, in the last thread a had a full mazworx sleeved sr20 and a modified greddy intake manifold for a 90mm throttle body...i dont go cheap and i dont buy ebay...so dont ever call that stuff ebay again. if you have anymore questions about it, you can PM me and i will be happy to answer them or i can give you the number of my friend that made it. next time though, use that brain of yours and dont bash someones thread...comments like this are delt with much better through a PM.

[c72c]

How much for the intercooler? didn't see a price.

[TEALSQUEAL]

will the fuel rail fit a s13 sr20det with a greddy manifold? Also what hardware comes with it? What is the ID? Are the fittings -6 or -8? I'm very interested

[Driftzenki]

still have the downpipe? pm me with pics if you still do

[90S13hatch_tony]

Would you take $10 bucks for a knock sensor shipped??

[vw203]

how much for the coil pack cover?

[rioredstang]

Isa the transmission for a sr20de or det? I'm looking for a de with .838 O/D. How much shipped to 37407?