Log in

View Full Version : Need Help identify plugs and hoses


Torq_Meister
04-26-2011, 09:14 PM
For some unknown reason my clutch fan came off and destroyed my fan shroud, electric fan wires, and some egr/vacuum hoses. looked through the FSM and been searching around and i couldnt find a straight answer. So i took some perty pictures with hopes that someone would be able to help me.

After the clutch fan destroyed the wires to my electric fan i didnt know where it even plugged into. is the plug circled in teal the plug that connected to the electric fan? if not could someone tell me what its for? And i also circled the one in green guessing that its the tripple pressure switch?

http://i1096.photobucket.com/albums/g334/Torq_Meister/Zilvia/help1.jpg

http://i1096.photobucket.com/albums/g334/Torq_Meister/Zilvia/help2.jpg

Now on to my second question, I know these hoses used to run to the canister on the drivers side near the headlight. Could someone tell me where the hoses circled in blue and red go to. I know one goes to the cap on canister ( circled in green) but im not sure which one.

http://i1096.photobucket.com/albums/g334/Torq_Meister/Zilvia/Help3.jpg

http://i1096.photobucket.com/albums/g334/Torq_Meister/Zilvia/Help4.jpg

Eramo323
04-27-2011, 01:32 PM
Vaccum hose diagram should be on you're hood......................

Pro ViZIon
04-27-2011, 01:40 PM
Here use this if you dont have it on your hood:

http://www.240edge.com/manuals/91-94_240sx/ec.pdf (view it in google chrome web browser)

If you cant just go here.

Manuals > USDM Cars > 1991-1994 240SX (KA24DE) - Nissan 240SX Performance Tuning (http://www.240edge.com/manuals/s13-ka24de.html)

and go to where it says "Engine Fuel and Emission Control System."

Hope it helps.