Log in

View Full Version : A few really quick wiring questions with pics.


Chrisw
04-24-2011, 11:20 PM
Am working on the wiring in my car and came across three quick questions.

1) This is my rear defrost. It is an on/off push button. I would like to replace this with a very simple cheap on off switch to match the rest of my switches. With a cheap switch there is a neg and a pos and you attach one to each end of the switch, but at the back of this thing there is 6 wires! What do I do to make it a regular switch?

http://img21.imageshack.us/img21/132/img6746zp.jpg

2) The shop that fixed my Rad support pulled out my Turbo timer for some reason. I purchased the car with this Turbo timer installed already. I know where the large plug plugs into but do you know what the single wire and smaller plug should attach too? I can't fine any matching connections on the whole dash (maybe it was not properly installed in the first place).

http://img28.imageshack.us/img28/6893/img6750e.jpg

3) Will my ECU be ok sitting here?

http://img31.imageshack.us/img31/1310/img6752k.jpg

godrifttoday
04-24-2011, 11:22 PM
do u own a light tester?

Nismo95
04-24-2011, 11:26 PM
looks good

Chrisw
04-24-2011, 11:56 PM
do u own a light tester?

I do, but I don't have a battery for the car right now :S


looks good

The ECU looks good? Like it'll be fine?

Chrisw
04-25-2011, 05:53 PM
Can anyone help me with the turbo timer? The dash is about to go back on and I need this in first.

camaro379ss
04-25-2011, 07:37 PM
the single wire is for japenese vehicles(not used) and the smaller connector connects into I believe the ebrake in some way which is not necessary either. Just connect the big one to the ignition jumper harness and you will be fine.

Chrisw
04-25-2011, 08:00 PM
the single wire is for japenese vehicles(not used) and the smaller connector connects into I believe the ebrake in some way which is not necessary either. Just connect the big one to the ignition jumper harness and you will be fine.

Roger that! Thanks man!