S14_Kouki
04-21-2011, 03:56 PM
Its OBO so make some offers.
Its a S15 SR20det w/ about 5k miles. Engine runs perfect, compression is perfect 175 on all 4.
Swap includes harness wired for a s14, starter, alt, cas, tranny, ect ect ect.
ONLY thing it will not include is injectors
$2100 gets you swap and POWER FC
Reason for sell. Well I want to try doing something else. Iv had this engine for 6 years its NEVER blowen nothing, spun nothing, ect ect. Perfect engine!!!
Engine has :
ACL main bearings
ACL rod bearings
ACL thrust washers
ARP headstuds
Apex headgasket
OEM rings
Balanced crank
Block and head both hot tanked
PDM 262 268 cams
BC springs
BC retainers
OEM oil pump
EVERY gasket and seal NEW
Peak Perfomance thermal intake gasket
OEM Valve seals
Mild port and polish
Must casting marks in head are ground down
DBfab Exhaust manifold
DBfab turbo elbow
Peak preformance magnetic oil drain plug
stainless turbo lines
Apexi intake
Greddy Rocker arm stoppers
Kazama motor mounts
Nismo tranny mount
http://i58.photobucket.com/albums/g269/pandadrifter/IMAG04181.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/IMAG0419.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/13423be5.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/103_0868.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/103_0874.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/103_0880.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/103_0882.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/103_0875.jpg
Its a S15 SR20det w/ about 5k miles. Engine runs perfect, compression is perfect 175 on all 4.
Swap includes harness wired for a s14, starter, alt, cas, tranny, ect ect ect.
ONLY thing it will not include is injectors
$2100 gets you swap and POWER FC
Reason for sell. Well I want to try doing something else. Iv had this engine for 6 years its NEVER blowen nothing, spun nothing, ect ect. Perfect engine!!!
Engine has :
ACL main bearings
ACL rod bearings
ACL thrust washers
ARP headstuds
Apex headgasket
OEM rings
Balanced crank
Block and head both hot tanked
PDM 262 268 cams
BC springs
BC retainers
OEM oil pump
EVERY gasket and seal NEW
Peak Perfomance thermal intake gasket
OEM Valve seals
Mild port and polish
Must casting marks in head are ground down
DBfab Exhaust manifold
DBfab turbo elbow
Peak preformance magnetic oil drain plug
stainless turbo lines
Apexi intake
Greddy Rocker arm stoppers
Kazama motor mounts
Nismo tranny mount
http://i58.photobucket.com/albums/g269/pandadrifter/IMAG04181.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/IMAG0419.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/13423be5.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/103_0868.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/103_0874.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/103_0880.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/103_0882.jpg
http://i58.photobucket.com/albums/g269/pandadrifter/103_0875.jpg