PDA

View Full Version : how do you know if you have a auto to manual conversion??


bentmode360
04-14-2011, 06:58 PM
im looking into getting a lower transmission harness from phase 2 and they give you an option on the site whether you have a five speed or a auto to manual conversion..i bought my car with a s13 sr blacktop and i dont know if it was converted or not.

Sileighty_85
04-14-2011, 07:15 PM
look on the black relay fuse box (firewall side IIRC) on the pass strut tower and see if you have 3 plugs. If you do then it was a Auto

bentmode360
04-14-2011, 11:20 PM
look on the black relay fuse box (firewall side IIRC) on the pass strut tower and see if you have 3 plugs. If you do then it was a Auto

will it matter when getting the lower transmission harness because i have the sr tranny and its 5 speed

Sileighty_85
04-14-2011, 11:29 PM
Yes it does matter,

If the chassis was an Auto then get the Auto Harness and Vice Versa

Its asking about the chassis not the engine set.

bentmode360
04-14-2011, 11:50 PM
Yes it does matter,

If the chassis was an Auto then get the Auto Harness and Vice Versa

Its asking about the chassis not the engine set.

but what if its asking about transmission? look
WSP Lower Transmission Harness : S13 / S14 (http://www.phase2motortrend.com/wsplotrhas13.html)

Sileighty_85
04-14-2011, 11:54 PM
but the second option is Auto To Manual Conversion
Meaning the it use to be an Auto but was then Converted to a 5 speed.

If your still unsure just call Enjuku Tomorrow to confirm

Mishkin_707
04-16-2011, 06:24 PM
dude, call a nissan dealership give them your VIN number and they will tell you over the phone. did it with my cousins 95 S14.

KiLLeR2001
04-16-2011, 06:36 PM
Cmon now people. It's simple. Write your Model Identification Number (MIN) down and use this website chart.

THE GARAGE GUIDES - 240SX VIN / Model ID Decoding (http://garage.projectraine.com/content_guides/240_vinmid/vinmid01.html)

Mishkin_707
04-16-2011, 07:15 PM
what he said^^^