blakeZX
04-11-2011, 03:43 AM
Made some changes to my setup so I am now offering some parts for sale that should help someone get their RB25DET swap up and running. Also some misc aftermarket and OEM stuff you may need.
*Note : All prices are BEFORE shipping; shipping is on your dime. All parts are in good/excellent condition unless otherwise noted.
Modified RB25 oil pan for use with RB26DETT (clears 26 oil pickup) - $65
http://i55.tinypic.com/14llfva.jpg
Was test-fitted and filled with oil but never used. This pan was modified to be used for an RB26 RWD conversion. I’m running a regular old 25 so no need for the extra clearance. Your gain!
R33 Skyline crossmember - $150
RB25 OEM motor mounts - $30
RB25 OEM transmission mount - SOLD
http://i56.tinypic.com/bdozs8.jpg
RB25-into-S14 3-inch mandrel bent aluminum turbo-back exhaust - SOLD
Modified elbow to clear LHD steering column
Downpipe from elbow to test pipe
Test pipe
Cat-back section with resonator
GT-Spec style muffler with removable silencer included
All gaskets, hangers and hardware included; I’d recommend you replace some gaskets.
http://i51.tinypic.com/16748w8.jpghttp://i53.tinypic.com/2vnetuh.jpghttp://i52.tinypic.com/axdybm.jpghttp://i52.tinypic.com/153r0ir.jpghttp://i56.tinypic.com/6nsevr.jpg
I went straight pipe so I no longer need this setup. Passed a CA modified exhaust fix-it ticket inspection with silencer installed :P
RB25 aftermarket turbo dump elbow, divorced wastegate - SOLD
RB25 OEM turbo recirculation valve - $20
http://i55.tinypic.com/33cx5s4.jpg
RB25 R1 Racing Sports intake pod filter with MAF adapter - SOLD
http://i51.tinypic.com/21e89cg.jpg
This is a good choice for swaps because it doesn't take up a lot of space compared to cone filters, yet it flows well. Fits N60/N62 MAFs.
RB25 OEM sidemount intercooler with piping/couplers - SOLD
http://i51.tinypic.com/2s01c01.jpg
I think this also fits RB20's due to the similarities in the manifolds.
Sheepdog PROF blow-off valve on OEM RB25 cold pipe - $110
http://i53.tinypic.com/jl4apk.jpghttp://i51.tinypic.com/2jcdauv.jpg
Super-mad-tight JDM, rare in the states. If you know what it is, you know it sounds awesome. Will not separate from cold pipe. Includes original packaging, vacuum hose, a legit white decal, and Japanese instructions.
RB25 OEM clutch kit, includes pressure plate, disc, throwout bearing - $60
http://i52.tinypic.com/2mhwzkz.jpg
Lots of meat on the clutch, was new when motor was swapped. Changed it out for an ACT 6-puck after a couple oil changes..also fits RB20 and VG30DE.
RB25/VG30DE/TT OEM Thermostat - $10
http://i55.tinypic.com/281d06t.jpg
Works great, removed to install colder Nismo unit. Includes Permatex thermostat housing gasket maker at no extra charge, lol.
Mishimoto 19psi (1.3bar) high-pressure radiator cap - $20
Used for two oil changes..then I installed a PSM swirl tank which came with a different cap. So I no longer need this. I think Nismo caps are only 16psi..this is 19. Accidentally deleted the pic but it is squeaky clean!
Samco blue silicone radiator hoses for RB20/25/26 - $70
http://i53.tinypic.com/112h3bp.jpg
Brand new, never used. Just collecting dust; someone can use these I'm sure.
Miscellaneous R33/240SX AC lines - SOLD
http://i54.tinypic.com/18c1ua.jpg
The two lines on the left were cut with tinsnips from an R33 front clip so they obviously need to be cut again and welded to work with your lines. Others are extras I don’t need.
S14 Nismo Power Brace – $120
http://i54.tinypic.com/52glkx.jpg
I couldn’t use this because I found out it hits the AC pulley on my RB25 after I hooked up my AC. Perfect for those of you who aren’t running AC, or are running KA’s/SR’s/what have you.
Wheel spacers:
-Powered By Max 20MM bolt-on (5x114.3) - SOLD
With removable hub rings. Discontinued part. Includes nuts.
-Generic 10MM slip-ons (5x114.3 and 4x114.3) - $25
-Generic 7MM slip-ons (Universal 5-lug) - $15
http://i55.tinypic.com/29qi49g.jpg
240SX S14 SE OEM black steering wheel, with airbag and cruise control - SOLD
http://i53.tinypic.com/2d2hyz8.jpghttp://i56.tinypic.com/2gydpow.jpg
Includes airbag, airbag hub, all wiring, cruise buttons, etc.
S14 tiny coolant hose (filler neck to overflow tank, with clamps) - $5
http://i54.tinypic.com/2z80lub.jpg
S14 OEM suspension links:
RUCA's - $15
Toe rods - $15
Tension rods (oem bushings are a little bit janky but they work fine) - $10
http://i56.tinypic.com/6ehedx.jpg
*Buy the whole set for $25.
S14 OEM front rotors - $20/pair
http://i52.tinypic.com/rkbprl.jpg
Great condition, includes dust shields if you want them. I swapped them out for Z32's so no longer needed.
S14 OEM black glovebox - $15
http://i51.tinypic.com/3443w61.jpg
Couple of scratches but overall looks decent. The locking mechanism is not in it so you can swap in the matching lock from your car's set..I may have it around somewhere.
S14 OEM grey rearview mirror - $20
http://i54.tinypic.com/30be6j9.jpg
Great condition, no nicks/scratches. Just dusty from sitting in my garage.
PAYMENT:
Obviously, cash is preferred if you are local. Please add 3% for all payments made through PayPal to cover fees. If you want multiple items, I may be able to cut you a package deal. It never hurts to ask. No refunds/exchanges, all sales are final.
SHIPPING:
All items ship from San Diego, CA. Please provide your zip code and a list of the items you are interested in for a shipping quote. Small items will ship within 1-2 days of cleared payment; please allow an extra day or two for large or heavy items as I will have to obtain packing materials for them.
If you are interested in picking up locally, let me know. If you’re coming from LA or OC and you are buying a large item or a lot of small items, I can meet you as far north as Oceanside on one of my days off.
Please PM me or text sixONEnine-NINEtwoNINE-sixONEnineSIX. My name is Blake. Thanks.
*Note : All prices are BEFORE shipping; shipping is on your dime. All parts are in good/excellent condition unless otherwise noted.
Modified RB25 oil pan for use with RB26DETT (clears 26 oil pickup) - $65
http://i55.tinypic.com/14llfva.jpg
Was test-fitted and filled with oil but never used. This pan was modified to be used for an RB26 RWD conversion. I’m running a regular old 25 so no need for the extra clearance. Your gain!
R33 Skyline crossmember - $150
RB25 OEM motor mounts - $30
RB25 OEM transmission mount - SOLD
http://i56.tinypic.com/bdozs8.jpg
RB25-into-S14 3-inch mandrel bent aluminum turbo-back exhaust - SOLD
Modified elbow to clear LHD steering column
Downpipe from elbow to test pipe
Test pipe
Cat-back section with resonator
GT-Spec style muffler with removable silencer included
All gaskets, hangers and hardware included; I’d recommend you replace some gaskets.
http://i51.tinypic.com/16748w8.jpghttp://i53.tinypic.com/2vnetuh.jpghttp://i52.tinypic.com/axdybm.jpghttp://i52.tinypic.com/153r0ir.jpghttp://i56.tinypic.com/6nsevr.jpg
I went straight pipe so I no longer need this setup. Passed a CA modified exhaust fix-it ticket inspection with silencer installed :P
RB25 aftermarket turbo dump elbow, divorced wastegate - SOLD
RB25 OEM turbo recirculation valve - $20
http://i55.tinypic.com/33cx5s4.jpg
RB25 R1 Racing Sports intake pod filter with MAF adapter - SOLD
http://i51.tinypic.com/21e89cg.jpg
This is a good choice for swaps because it doesn't take up a lot of space compared to cone filters, yet it flows well. Fits N60/N62 MAFs.
RB25 OEM sidemount intercooler with piping/couplers - SOLD
http://i51.tinypic.com/2s01c01.jpg
I think this also fits RB20's due to the similarities in the manifolds.
Sheepdog PROF blow-off valve on OEM RB25 cold pipe - $110
http://i53.tinypic.com/jl4apk.jpghttp://i51.tinypic.com/2jcdauv.jpg
Super-mad-tight JDM, rare in the states. If you know what it is, you know it sounds awesome. Will not separate from cold pipe. Includes original packaging, vacuum hose, a legit white decal, and Japanese instructions.
RB25 OEM clutch kit, includes pressure plate, disc, throwout bearing - $60
http://i52.tinypic.com/2mhwzkz.jpg
Lots of meat on the clutch, was new when motor was swapped. Changed it out for an ACT 6-puck after a couple oil changes..also fits RB20 and VG30DE.
RB25/VG30DE/TT OEM Thermostat - $10
http://i55.tinypic.com/281d06t.jpg
Works great, removed to install colder Nismo unit. Includes Permatex thermostat housing gasket maker at no extra charge, lol.
Mishimoto 19psi (1.3bar) high-pressure radiator cap - $20
Used for two oil changes..then I installed a PSM swirl tank which came with a different cap. So I no longer need this. I think Nismo caps are only 16psi..this is 19. Accidentally deleted the pic but it is squeaky clean!
Samco blue silicone radiator hoses for RB20/25/26 - $70
http://i53.tinypic.com/112h3bp.jpg
Brand new, never used. Just collecting dust; someone can use these I'm sure.
Miscellaneous R33/240SX AC lines - SOLD
http://i54.tinypic.com/18c1ua.jpg
The two lines on the left were cut with tinsnips from an R33 front clip so they obviously need to be cut again and welded to work with your lines. Others are extras I don’t need.
S14 Nismo Power Brace – $120
http://i54.tinypic.com/52glkx.jpg
I couldn’t use this because I found out it hits the AC pulley on my RB25 after I hooked up my AC. Perfect for those of you who aren’t running AC, or are running KA’s/SR’s/what have you.
Wheel spacers:
-Powered By Max 20MM bolt-on (5x114.3) - SOLD
With removable hub rings. Discontinued part. Includes nuts.
-Generic 10MM slip-ons (5x114.3 and 4x114.3) - $25
-Generic 7MM slip-ons (Universal 5-lug) - $15
http://i55.tinypic.com/29qi49g.jpg
240SX S14 SE OEM black steering wheel, with airbag and cruise control - SOLD
http://i53.tinypic.com/2d2hyz8.jpghttp://i56.tinypic.com/2gydpow.jpg
Includes airbag, airbag hub, all wiring, cruise buttons, etc.
S14 tiny coolant hose (filler neck to overflow tank, with clamps) - $5
http://i54.tinypic.com/2z80lub.jpg
S14 OEM suspension links:
RUCA's - $15
Toe rods - $15
Tension rods (oem bushings are a little bit janky but they work fine) - $10
http://i56.tinypic.com/6ehedx.jpg
*Buy the whole set for $25.
S14 OEM front rotors - $20/pair
http://i52.tinypic.com/rkbprl.jpg
Great condition, includes dust shields if you want them. I swapped them out for Z32's so no longer needed.
S14 OEM black glovebox - $15
http://i51.tinypic.com/3443w61.jpg
Couple of scratches but overall looks decent. The locking mechanism is not in it so you can swap in the matching lock from your car's set..I may have it around somewhere.
S14 OEM grey rearview mirror - $20
http://i54.tinypic.com/30be6j9.jpg
Great condition, no nicks/scratches. Just dusty from sitting in my garage.
PAYMENT:
Obviously, cash is preferred if you are local. Please add 3% for all payments made through PayPal to cover fees. If you want multiple items, I may be able to cut you a package deal. It never hurts to ask. No refunds/exchanges, all sales are final.
SHIPPING:
All items ship from San Diego, CA. Please provide your zip code and a list of the items you are interested in for a shipping quote. Small items will ship within 1-2 days of cleared payment; please allow an extra day or two for large or heavy items as I will have to obtain packing materials for them.
If you are interested in picking up locally, let me know. If you’re coming from LA or OC and you are buying a large item or a lot of small items, I can meet you as far north as Oceanside on one of my days off.
Please PM me or text sixONEnine-NINEtwoNINE-sixONEnineSIX. My name is Blake. Thanks.