SPC Camber Arm and Link - S14 RUCA

[lagvoid21]

Hi all,

I just installed SPC camber arms and links. Asside from the upside down SPC logo on the link, does everything look ok? I'm a complete amateur so please bear with me. Specifically, do the areas circled in orange look ok?

http://img31.imageshack.us/img31/5695/dsc03379copy.jpg (http://img31.imageshack.us/i/dsc03379copy.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

http://img713.imageshack.us/img713/1839/dsc03381copy.jpg (http://img713.imageshack.us/i/dsc03381copy.jpg/)

Uploaded with ImageShack.us (http://imageshack.us)

I need to get a 8mm hex bit socket to properly torque down the two bolts on the RUCA.

Thanks!

[holemilk00]

You have them locked down, but honestly no matter how well you guessed, you're going to have to get an alignment.

[lagvoid21]

You have them locked down, but honestly no matter how well you guessed, you're going to have to get an alignment.

Thanks for checking! Yeah, planning to get an alignment next.

[ZAKU]

1. I don't think that nut on the RUCA is on the correct side, doesn't it tighten up against the other nut?

2. That brake cable looks really stretched, is that normal?

[Otto347]

The areas in orange (top pic) should show the same amount of threads on each end. You have to spin each end until they are close then adjust.

[lagvoid21]

Really glad I asked you all. Will make those corrections.

As for the brake cable...I'm not really sure? Are you talking about the ebrake line or brake fluid line?