holemilk00
04-03-2011, 08:34 PM
Do you feel inadequate? Sometimes feel like your <500whp car just isn't enough anymore? Well then do I have the cure you, step right up and take a look at this deal:
RB30 Series II Short Blocks ZOZMZGZ
I've realized I don't have the room for three of these and I have one for myself, so here are the extra two for sale. As you can see they have all the accessories on them and all the brackets. Nothing is bent and everything is clean, these are not rust bucket motors like a lot of the ones you see for sale. These are for the base of the mother of all RB builds.
I'd love to have them picked up but I'd be willing to ship if you're willing to pay, I have a pallet and a forklift so it could go freight which will be cheaper.
I will deliver within a reasonable distance for the cost of gas, I will provide receipts and you will be buying me McDonald's before I drive back home.
These things are one hell of a wait from Australia and shipping/import tax/customs usually runs over a grand so I'm going to say I need to at least get my money back out of it.
PM me here I'm here everyday
I take paypal
$1000+shipping
Sorry for the indoor pics but they are all I have for now. If you've seen these things for sale before you know that these are amazingly rust free and clean.
http://img.photobucket.com/albums/v228/holemilk00/Car/DSC04819.jpg
http://img.photobucket.com/albums/v228/holemilk00/Car/DSC04817.jpg
Even the dip stick is in great condition
http://img.photobucket.com/albums/v228/holemilk00/Car/DSC04818.jpg
http://img.photobucket.com/albums/v228/holemilk00/DSC04820.jpg
http://img.photobucket.com/albums/v228/holemilk00/DSC04821.jpg
A/C compressor
http://img.photobucket.com/albums/v228/holemilk00/DSC04822.jpg
http://img.photobucket.com/albums/v228/holemilk00/DSC04824.jpg
http://img.photobucket.com/albums/v228/holemilk00/DSC04825.jpg
Common questions about these are:
Q: Will a RB26 head bolt right to these?
A: Yes after you have the head stud holes in the block machined from 12mm to 14mm they will bolt right up.
Q: Will a RB25 head bolt right to these?
A: No, the above machining has to be done and there are some water jackets that need to be enlarged (this doesn't "HAVE" to be done for it to work, but it is advised)
Q: Will a RB25 neo head bolt right to these?
A: Yes.
Q: How much should the machining cost to get my RB26/25 head to work?
A: I've had two blocks done for each head in the past, never paid over $200 from a VERY reputable shop.
Q: How much is shipping?
A: Usually to a business address anywhere from $200-$400 depending on the distance, a little more for a residential address. (If you know of a cheaper way I will be more than happy to do whatever it takes to use it)
Q: How much do you eat at McDonald's?
A: About $6 bucks
Q: Do you have a head that you will sell with these:
A: Yes I have a R33 GTR RB26 head I will sell with one of them, complete, PM me for details.
Any other questions should be posted in here so I can answer them in open forum in case anyone else has the same question.
RB30 Series II Short Blocks ZOZMZGZ
I've realized I don't have the room for three of these and I have one for myself, so here are the extra two for sale. As you can see they have all the accessories on them and all the brackets. Nothing is bent and everything is clean, these are not rust bucket motors like a lot of the ones you see for sale. These are for the base of the mother of all RB builds.
I'd love to have them picked up but I'd be willing to ship if you're willing to pay, I have a pallet and a forklift so it could go freight which will be cheaper.
I will deliver within a reasonable distance for the cost of gas, I will provide receipts and you will be buying me McDonald's before I drive back home.
These things are one hell of a wait from Australia and shipping/import tax/customs usually runs over a grand so I'm going to say I need to at least get my money back out of it.
PM me here I'm here everyday
I take paypal
$1000+shipping
Sorry for the indoor pics but they are all I have for now. If you've seen these things for sale before you know that these are amazingly rust free and clean.
http://img.photobucket.com/albums/v228/holemilk00/Car/DSC04819.jpg
http://img.photobucket.com/albums/v228/holemilk00/Car/DSC04817.jpg
Even the dip stick is in great condition
http://img.photobucket.com/albums/v228/holemilk00/Car/DSC04818.jpg
http://img.photobucket.com/albums/v228/holemilk00/DSC04820.jpg
http://img.photobucket.com/albums/v228/holemilk00/DSC04821.jpg
A/C compressor
http://img.photobucket.com/albums/v228/holemilk00/DSC04822.jpg
http://img.photobucket.com/albums/v228/holemilk00/DSC04824.jpg
http://img.photobucket.com/albums/v228/holemilk00/DSC04825.jpg
Common questions about these are:
Q: Will a RB26 head bolt right to these?
A: Yes after you have the head stud holes in the block machined from 12mm to 14mm they will bolt right up.
Q: Will a RB25 head bolt right to these?
A: No, the above machining has to be done and there are some water jackets that need to be enlarged (this doesn't "HAVE" to be done for it to work, but it is advised)
Q: Will a RB25 neo head bolt right to these?
A: Yes.
Q: How much should the machining cost to get my RB26/25 head to work?
A: I've had two blocks done for each head in the past, never paid over $200 from a VERY reputable shop.
Q: How much is shipping?
A: Usually to a business address anywhere from $200-$400 depending on the distance, a little more for a residential address. (If you know of a cheaper way I will be more than happy to do whatever it takes to use it)
Q: How much do you eat at McDonald's?
A: About $6 bucks
Q: Do you have a head that you will sell with these:
A: Yes I have a R33 GTR RB26 head I will sell with one of them, complete, PM me for details.
Any other questions should be posted in here so I can answer them in open forum in case anyone else has the same question.