Dr.Baby
04-02-2011, 12:49 PM
Alright so the deal with getting my project track bike fell through. No big deal, but I have this motor out and real to be sold, no waiting like the rest of my parts.
Zenki S14 SR20DET
Tuned Enthalpy ECU for 100 octane
Race Harness, thats old and should be repaired/replaced but works just fine. Hook 3 wires up and the ecu is powered and will fire.
Compression check 3 months ago was 155 across the board.
CP Pistons 9.0:1 compression
Stock rod's w/ arp rod bolts
Apexi headgasket 1.0mm headgasket
Built head w/ Springs/retainers/valves, 3 angle valve job
Tomei 256 intake cam w/ VTC retained
Tomei 264 exhaust cam (this setup helps with spool a lot and midrange torque)
Polished Valve cover with OG Pink GodziRa sticker on it
Nismo 740cc injectors (needs new o-rings, they leak a little but nothing major)
Z32 MAF
Apexi Intake
Full race prostock (bottom mount) exhaust manifold w/ 38mm external wastegate flange
38mm tial wastegate
GT2871r (i forget the AR, i belive its the bigger housing) 3" inlet, has a 90 degree elbow welded onto the compressor outlet. TURBO IS WELDED TO THE MANIFOLD.
Aftermarket turbo elbow
AN stainless lines water/oil
Setrab oil cooler setup with distro block, this thing is big!
Nismo motor mounts
$2800 obo.
exedy hyper single with 50% life left on the disk i'll include for $400 extra
5 speed transmission $200 extra
or buy it all together for $3100 and have a race/street motor ready to go!
i have tons of pictures but my photobucket account has exceeded bandwith. PM me your # and i will text you pictures.
Located in Costa Mesa, CA
I WILL SHIP ON A PALLET, YELLOW FREIGHT. Around $300.
contact:
AIM: alexkorsmaybe
email me: alex*at*alexkors*DOT*com
PM me and i'll give you my phone number.
Zenki S14 SR20DET
Tuned Enthalpy ECU for 100 octane
Race Harness, thats old and should be repaired/replaced but works just fine. Hook 3 wires up and the ecu is powered and will fire.
Compression check 3 months ago was 155 across the board.
CP Pistons 9.0:1 compression
Stock rod's w/ arp rod bolts
Apexi headgasket 1.0mm headgasket
Built head w/ Springs/retainers/valves, 3 angle valve job
Tomei 256 intake cam w/ VTC retained
Tomei 264 exhaust cam (this setup helps with spool a lot and midrange torque)
Polished Valve cover with OG Pink GodziRa sticker on it
Nismo 740cc injectors (needs new o-rings, they leak a little but nothing major)
Z32 MAF
Apexi Intake
Full race prostock (bottom mount) exhaust manifold w/ 38mm external wastegate flange
38mm tial wastegate
GT2871r (i forget the AR, i belive its the bigger housing) 3" inlet, has a 90 degree elbow welded onto the compressor outlet. TURBO IS WELDED TO THE MANIFOLD.
Aftermarket turbo elbow
AN stainless lines water/oil
Setrab oil cooler setup with distro block, this thing is big!
Nismo motor mounts
$2800 obo.
exedy hyper single with 50% life left on the disk i'll include for $400 extra
5 speed transmission $200 extra
or buy it all together for $3100 and have a race/street motor ready to go!
i have tons of pictures but my photobucket account has exceeded bandwith. PM me your # and i will text you pictures.
Located in Costa Mesa, CA
I WILL SHIP ON A PALLET, YELLOW FREIGHT. Around $300.
contact:
AIM: alexkorsmaybe
email me: alex*at*alexkors*DOT*com
PM me and i'll give you my phone number.