jr_ss
04-02-2011, 12:42 PM
I have up for grabs are the following item. If you have any questions please pm me or email me at [email protected]
-Tomei SLA's for SR, BNIB - $230 shipped
I also have a running S14 SR short block forsale. It has been run and ran great. It will come assembled with the head, all brackets, and CAS but, no accessories, in/ex manifolds and a stock oil pan... The oil filter block has been removed, but I may have it to include(I had a Tomei oil block adapter installed). I also have a -10an bung welded to the upper oil pan for my catch can drain and it was modified to run a full windage tray and crank scraper in the gridle along w/ ARP main studs, which will be included. The motor has good compression across the board(140) and put down 360rwhp at 14psi on a 3071R. I'm upgrading to a VVL setup and would like to move this to fund the build. I have access to ship this and will if buyer pays for it. I've shipped one before and it ran $100-150 to ship as far as Texas.
Here's a link to the build pictures...
Engine Build pictures by jr_ss - Photobucket (http://s627.photobucket.com/albums/tt352/jr_ss/Engine%20Build/#!cpZZ2QQtppZZ16)
S14 SR motor set - $1150 plus shipping
-Head-
Supertech DVS
New valve seals
Mild port on intake side
-Bottomend-
JE forged 8.5:1 x 86.5mm pistons
Eagle Rods w/ ARP2000's
Cosworth main/rod/thrust washer bearings
Cosworth 1.5mm HG
ARP main/head studs
New oil pump/timing chain items
New water pump
All coolant hoses
SARD lower temp Thermostat
http://i627.photobucket.com/albums/tt352/jr_ss/Forsale001.jpg?t=1301769168
http://i627.photobucket.com/albums/tt352/jr_ss/Forsale002.jpg?t=1301769168
http://i627.photobucket.com/albums/tt352/jr_ss/forsale003.jpg?t=1301769771
-Tomei SLA's for SR, BNIB - $230 shipped
I also have a running S14 SR short block forsale. It has been run and ran great. It will come assembled with the head, all brackets, and CAS but, no accessories, in/ex manifolds and a stock oil pan... The oil filter block has been removed, but I may have it to include(I had a Tomei oil block adapter installed). I also have a -10an bung welded to the upper oil pan for my catch can drain and it was modified to run a full windage tray and crank scraper in the gridle along w/ ARP main studs, which will be included. The motor has good compression across the board(140) and put down 360rwhp at 14psi on a 3071R. I'm upgrading to a VVL setup and would like to move this to fund the build. I have access to ship this and will if buyer pays for it. I've shipped one before and it ran $100-150 to ship as far as Texas.
Here's a link to the build pictures...
Engine Build pictures by jr_ss - Photobucket (http://s627.photobucket.com/albums/tt352/jr_ss/Engine%20Build/#!cpZZ2QQtppZZ16)
S14 SR motor set - $1150 plus shipping
-Head-
Supertech DVS
New valve seals
Mild port on intake side
-Bottomend-
JE forged 8.5:1 x 86.5mm pistons
Eagle Rods w/ ARP2000's
Cosworth main/rod/thrust washer bearings
Cosworth 1.5mm HG
ARP main/head studs
New oil pump/timing chain items
New water pump
All coolant hoses
SARD lower temp Thermostat
http://i627.photobucket.com/albums/tt352/jr_ss/Forsale001.jpg?t=1301769168
http://i627.photobucket.com/albums/tt352/jr_ss/Forsale002.jpg?t=1301769168
http://i627.photobucket.com/albums/tt352/jr_ss/forsale003.jpg?t=1301769771