kaotekxe
04-02-2011, 11:57 AM
ok guys so i must put my car up for sale. it is a 1999 Bmw 323i 4dr sedan with a whole lot of custom and aftermarket stuff. im looking to buy another house so this must go, got another baby on the way. looking for 15k obo. i bought the car with 94500 miles on the odometer for $14500 and ill finally be paying it off in the next couple months making my total $18360 after finance charges and all. its a real nice and clean ride. a few locals have seen it. its suspension is really setup for the track but havent had a chance to take it out. if interested text me at 6023280466 for details.
1999 BMW E46 sedan 323i
Exterior
color code hellrot red
Carbon Fiber hood(oem style) and trunk(csl style)
Carbon fiber mirror(acs style)
Carbon fiber acs rear window wing
Carbon fiber shark fin
Carbon fiber headlight eyebrows
yet black roof
paint matched trim (hellrot red)
all fenders professionally rolled and rears pulled
3k hid's
interior
custom c/f interior trim all around
m3 alcantara steering wheel
custom c/f steering wheel trim
custom double din install and hvac relocation
c/f tms weighted shift knob
suspension
uuc barbarian front and rear sway bars
tms rear subframe reinforment kit installed and welded in
raceland coils w/ cosmos pillowball mounts
Uuc rlcab
rear camber arms
hpf short shifter
rotara front and rear strut bars
vogtland 90mm extended stud conversion kit
wheels/brakes
x5 wheels with 20mm spacers
19x9+27 front and 19x10+25 rear
ssbc/uuc bbk 4 pot calipers all around with hawk pads
not sure of rotor size but i think they are 11inf and 9r
stainless steel brake lines
engine
155k on the odometer
cel is on due to headers
vf supercharger kit, v2 compressor with v1 internals 6psi (rated at 271hp and 235tq without compressor upgrades)
aa replica headers and forza catback (both custom modded to fit sedan)
uuc m5 clutch and 11lb flywheel
stainless clutch line
the only actual downfalls to the car is that it does have hail damage on the pass side of the car and it has a small exhaust leak.
current wheel setup are some bmw x5 rims with 20mm spacers all around with 2 degree neg camber in the rear with rolled fenders
19x9+27 front with 215/35r19(tires brand new 0 miles)
19x10+25 rear with 235/35r19 (about 95% thread)
http://i52.photobucket.com/albums/g28/santies/e46/BERn151.jpg
http://i52.photobucket.com/albums/g28/santies/IMG_20110213_164051.jpg
http://i52.photobucket.com/albums/g28/santies/IMG_20110213_164058.jpg
http://i52.photobucket.com/albums/g28/santies/IMG_20110213_164111.jpg
http://i52.photobucket.com/albums/g28/santies/e46/IMG_2639.jpg
http://i52.photobucket.com/albums/g28/santies/e46/IMG_2621.jpg
http://i52.photobucket.com/albums/g28/santies/e46/IMG_2623.jpg
http://i52.photobucket.com/albums/g28/santies/e46/IMG_2450.jpg
http://i52.photobucket.com/albums/g28/santies/e46/IMG_0265.jpg
http://i52.photobucket.com/albums/g28/santies/e46/Film_Clapper_Board_Action1.jpg
1999 BMW E46 sedan 323i
Exterior
color code hellrot red
Carbon Fiber hood(oem style) and trunk(csl style)
Carbon fiber mirror(acs style)
Carbon fiber acs rear window wing
Carbon fiber shark fin
Carbon fiber headlight eyebrows
yet black roof
paint matched trim (hellrot red)
all fenders professionally rolled and rears pulled
3k hid's
interior
custom c/f interior trim all around
m3 alcantara steering wheel
custom c/f steering wheel trim
custom double din install and hvac relocation
c/f tms weighted shift knob
suspension
uuc barbarian front and rear sway bars
tms rear subframe reinforment kit installed and welded in
raceland coils w/ cosmos pillowball mounts
Uuc rlcab
rear camber arms
hpf short shifter
rotara front and rear strut bars
vogtland 90mm extended stud conversion kit
wheels/brakes
x5 wheels with 20mm spacers
19x9+27 front and 19x10+25 rear
ssbc/uuc bbk 4 pot calipers all around with hawk pads
not sure of rotor size but i think they are 11inf and 9r
stainless steel brake lines
engine
155k on the odometer
cel is on due to headers
vf supercharger kit, v2 compressor with v1 internals 6psi (rated at 271hp and 235tq without compressor upgrades)
aa replica headers and forza catback (both custom modded to fit sedan)
uuc m5 clutch and 11lb flywheel
stainless clutch line
the only actual downfalls to the car is that it does have hail damage on the pass side of the car and it has a small exhaust leak.
current wheel setup are some bmw x5 rims with 20mm spacers all around with 2 degree neg camber in the rear with rolled fenders
19x9+27 front with 215/35r19(tires brand new 0 miles)
19x10+25 rear with 235/35r19 (about 95% thread)
http://i52.photobucket.com/albums/g28/santies/e46/BERn151.jpg
http://i52.photobucket.com/albums/g28/santies/IMG_20110213_164051.jpg
http://i52.photobucket.com/albums/g28/santies/IMG_20110213_164058.jpg
http://i52.photobucket.com/albums/g28/santies/IMG_20110213_164111.jpg
http://i52.photobucket.com/albums/g28/santies/e46/IMG_2639.jpg
http://i52.photobucket.com/albums/g28/santies/e46/IMG_2621.jpg
http://i52.photobucket.com/albums/g28/santies/e46/IMG_2623.jpg
http://i52.photobucket.com/albums/g28/santies/e46/IMG_2450.jpg
http://i52.photobucket.com/albums/g28/santies/e46/IMG_0265.jpg
http://i52.photobucket.com/albums/g28/santies/e46/Film_Clapper_Board_Action1.jpg