CA powered s13 partout! and a stock s13 partout

[sr20sean]

so ive been seriously thinking about parting out the track car and using this hardbody pickup im probably getting as a backup car in the event something happens to the 240 im driving now while im at an event.
realized 1) i cant afford insurance on several cars/trucks and a trailer right now 2) id rather have an underpowered car i can drive and drift instead of 2 that i cant afford do drive or drift. 3) its just impractical for me at this point.

pretty much selling everything off it.
-CA18 swap new head gasket with arp head studs new timing belt, new water pump, new valve cover gaskets, 3 CAS's, clutch in great shape, spare upper cover, harness, fmic, transmission, braided lines, ka24e maf, will sell my sr t28 for the right price otherwise it will go on the ka. 800 with everything but the t28
-dash
-cluster
-might have a welded diff for it if i dont throw that in this car if i do then ill have a vlsd for sale
-full rolling shell (tubbed front, gutted, 5spd, solid steering bushing some other stuff i probably wont feel like pulling off) (my knuckles lca's and tie rods wont be included with that they will just be stock s13 steering stuff) some rust, theres small hole under the gas pedal but thats just cause i never got around to fixing it. probably will have it fixed though. will be on either stock suspension or shocks with tein s-tech's

also parting out a stock 1990 hatch that was in an accident. still has a single cam, has 109k iirc.
full 5 spd swap - 400
brakes- 80
mint dash - 50
thats just what i could think of for the time being. throw me offers on either car.

[sr20sean]

really no one?

[Chubaka]

DO you have the trunk latch off that 90 you parting out?? If so how much shipped to socal?

I need this
http://i55.tinypic.com/kexe9g.jpg

[truaznflipboi]

Messaged you

[venom2034]

im looking for a stock bmc for a s13. do you have it?

[sr20sean]

DO you have the trunk latch off that 90 you parting out?? If so how much shipped to socal?

I need this
http://i55.tinypic.com/kexe9g.jpg
i have that throw me an offer

im looking for a stock bmc for a s13. do you have it?

yup i have one on the parts car.

[Noxy]

Pm'ed with a question...

[venom2034]

whats the price shipped to 11354

[sr20sean]

^ youre like an hour and 15 min from me it would be alot more worth it to just meet up lol

but throw me an offer no idea what they go for

[nismoracingsx]

need the lower mount bracket that bolts the alternator to the block + associated hardware.
(bottom piece in this picture)
http://i561.photobucket.com/albums/ss52/BowVoodoo/KA24DE/01ThingsYouNeed.jpg

shipped to 31419? thx thx thx

[sr20sean]

just the bottom one?

[nismoracingsx]

yup, the bottom piece. I already have a tension adjuster top bracket = /

[DALAZ_68]

if you have the CA18 Transmission dust cover shoot me a PM...

[sr20sean]

yup, the bottom piece. I already have a tension adjuster top bracket = /
alright ill pull it off. shoot me an offer

if you have the CA18 Transmission dust cover shoot me a PM...

i dont think i have one sorry

[driver42484]

ill give you 500 for the engine

[90hatchie]

ill give you 500 for the engine
shut the fuck up lowballing scum

[sr20sean]

ill give you 500 for the engine

unless youre talking about engine only then this is my answer

shut the fuck up lowballing scum

[DALAZ_68]

alright ill pull it off. shoot me an offer



i dont think i have one sorry

its the plate that goes between the trans and engine...covers up the lower hole

click here (http://www.impactblue.org/content/display.php?page=caref.partsdb&action=list&searchtype=section&search=110) very top rite part # 11251... lmk :ugh:

[sr20sean]

OHHHHHH that one i thought you were talking about the boot that s14 ka transmissions have where the output shaft goes lol
ill let you know if i end up parting with that

[bernal125]

Do you have manual window door panels? Gray? Thanks!

Sent from my PC36100 using Tapatalk

[nismoracingsx]

msglngth

....

[Chubaka]

i have that throw me an offer

I dont wanna low ball you, How does 15 shipped sound?

[sr20sean]

Do you have manual window door panels? Gray? Thanks!

Sent from my PC36100 using Tapatalk
yea i have a set of manual ones actually. i think theyre black though?

msglngth

....
changed your mind?

I dont wanna low ball you, How does 15 shipped sound?

sounds good to me as long as your in the states lol

[OurOnePassion]

Are you, by any chance, parting out the SOHC or trying to sell it whole?

I'm in need of good/working injectors.

[IKKarma]

Dash price shipped to 29611 also u got the ka wireing harnass uncut on that 90 I need upper and lower if so can I get a shipped price?

[sr20sean]

Are you, by any chance, parting out the SOHC or trying to sell it whole?

I'm in need of good/working injectors.

ill part the engine. just injectors?

Dash price shipped to 29611 also u got the ka wireing harnass uncut on that 90 I need upper and lower if so can I get a shipped price?

rather would not ship the dash since it would be a bitch to ship. unless you really wanted to pay for the shipping costs. (i honestly dont know how i would ship a dash)

and the wiring harness is spoken for sorry.

[OurOnePassion]

Yeah, just the injectors and the seals/o-rings on them if they're still good. Especially if the pintle caps are in good condition.

[Noxy]

Yeah, just the injectors and the seals/o-rings on them if they're still good. Especially if the pintle caps are in good condition.

Even if the pintle caps aren't in good shape you can buy an injector rebuild kit for a pulsar. It's cheap and easy! :bigok:

[sr20sean]

Yeah, just the injectors and the seals/o-rings on them if they're still good. Especially if the pintle caps are in good condition.

got them throw me an offer :D

[OurOnePassion]

PM ssssent.

[Chubaka]

sounds good to me as long as your in the states lol


Yea im in cali. Wats your do you have paypal so i can send you the cash.

[sr20sean]

Yea im in cali. Wats your do you have paypal so i can send you the cash.

[email protected]

[DALAZ_68]

OHHHHHH that one i thought you were talking about the boot that s14 ka transmissions have where the output shaft goes lol
ill let you know if i end up parting with that

kew kew let me know PLEASE!

[driver42484]

yes 500 for the engine. might need the harness as well. what kind of suspension is on the shell?

[sr20sean]

kew kew let me know PLEASE!

will do man

yes 500 for the engine. might need the harness as well. what kind of suspension is on the shell?

i pm'd you last night and i never got a reply.

right now its got new godspeed coils but im not selling them.

ill send you another pm in case you didnt get last nights?

[OurOnePassion]

got them throw me an offer :D

PM ssssent.

Just wondering if you got the PM.

[sr20sean]

Just wondering if you got the PM.

might have missed it ill check

[boarding2008]

Pm sent. I'm in WNY which isn't that far

[sr20sean]

its like 5-6 hours from me last time i checked...

[bruteS13]

price on the ka24e shifter assembly and the speed sensor shipped to 57769 will send a pm with my number for quick response, and free bump wish i could pick up the motor but have other plans in mind and NY is to far for me to go lol

[sr20sean]

was hoping to keep that with the 5spd swap.

[rjtrout2000]

PM sent to you about a part.

[punk138]

do u have a clean driver side fender by any chance?

[Chubaka]

Payment sent for the trunk latch.

[sr20sean]

do u have a clean driver side fender by any chance?
sorry i dont
Payment sent for the trunk latch.
got it

[gsk8087]

still got that harness?

[sr20sean]

^ which one?

[gsk8087]

^ which one?

awww shoot i thought it was got a ka24de :duh: thats what get for not reading everything free bump

[sr20sean]

i have a ka24de harness... but its cut

[driver42484]

havnt been on in a while. how much for the harness.

[Chubaka]

Thanks for the latch

[nismoracingsx]

hey man, you ever get that alternator bracket shipped out for me???

[Snake213]

do you have the single cam engine harness if so how much would you sell it for?

[schells86]

so how much would you actually sell the whole engine for??

[sr20sean]

do you have the single cam engine harness if so how much would you sell it for?
i have one just its missing the maf plug and the under dash plug

so how much would you actually sell the whole engine for??

which engine? lol

[Mitsubayati]

How much for the FMIC kit and t28? Pics please!

[sr20sean]

1200. you also get the complete engine, harness, ecu, tranny, extra cas and resistor box and ignitor chip, braided lines, turbo elbow, downpipe, boost gauge, and emanage.

complete drop in and go setup.

[ChicagoS14]

Do you have the power steering bracket from a CA18 ?

[NM_240sx]

On your 90 hatch part car. Does it happen to have the right quarter trim. (the carpet trim that covers the strut towers)

[sr20sean]

Do you have the power steering bracket from a CA18 ?
i have one but its going with the engine

On your 90 hatch part car. Does it happen to have the right quarter trim. (the carpet trim that covers the strut towers)

i have that

[NM_240sx]

i have that

alright awesome!! Well if you could shoot me a photo and if it is in one piece I will be very interested

[91s13hatchback]

whats the condition bro. i just bew my ka but i need a strong one that can handle drifting...lmk

[Zushi]

im looking for a ca18det crank pulley, intake manifold to engine block bracket (either of the two so that I at least have one). I'm also looking for an uncut CA18DET M/T main harness (ECU to engine).

[240bandwagon]

If you've still got the '90 stock partout, I was wondering if you've got the A/C condenser? I need one on the cheap. ;] ;]