OS Giken TS2B Clutch

[fliprayzin240sx]

Since the local shop I usually go to for shit like this closed up, figured I'd ask in here. Anybody know what Throw out bearing and size carrier you have to use for this clutch into an RB25? I'm trying to figure out if I'm supposed to use the stock carrier or not.

My situation is that I have an SR20 TS2B clutch, got rid of the SR, traded the SR flywheel for an RB unit, transfered the cage/clutch over and planning on reusing the clutch for the RB25. Problem is, I dont have an RB25 carrier or TOB. I still got my SR20 one and as far as I know, uses the shortest carrier there is (14mm). I was told what I need might be either the 20mm or the 24mm carrier. Anybody know which I one I really need?

[a7olyte]

Here is the full information from OS Giken:
Racing Multi-Plate | OS Racing Clutch | Products | OS GIKEN (http://www.osgiken.net/products/racingmultiplate.html)

I have attached an image of I believe what you are looking for.
http://i819.photobucket.com/albums/zz116/andyyychen/ts2b.jpg

They use the same release bearing, but different sleeve according to part number. You may need to purchase a new sleeve.

I hope this answers your question.

[Sileighty_85]

Heres some info
OS Giken TS2B Multi Plate Racing Clutch Kit Nissan (http://www.rhdjapan.com/os-giken-ts2b-multi-plate-racing-clutch-kit-nissan-11848)

It mentions a specific sleeve, maybe Contact RHD and see if they can help you out?

[fliprayzin240sx]

I contacted RHDJapan but no replies. The carrier sleeves that OS Giken uses are all OEM nissan sleeves. Just different thickness. I'll use that parts reference above and see if that is the 20mm or 24mm carrier. Thanks...