PDA

View Full Version : CA FS: KA 5SPD Manual Trans, Flywheel, and Backing plate

Lees_Garage
03-19-2011, 03:00 AM
Mods please lock
davidpham
03-19-2011, 12:45 PM
is this the dohc tranny?
andisan
03-19-2011, 12:47 PM
shipping on the plate? to 93436?
HAWAII
03-19-2011, 01:08 PM
location? I'll get the tranny!
95_S14
03-19-2011, 02:10 PM
is this the dohc tranny?

There all the same but the if you have a 96-98 you need a 96-98 trans or you will have a cel light
Lees_Garage
03-19-2011, 02:34 PM
is this the dohc tranny?

SOHC

shipping on the plate? to 93436?

$30.00

location? I'll get the tranny!

Fontana 92335

There all the same but the if you have a 96-98 you need a 96-98 trans or you will have a cel light

Thank you!
johnksoy
03-19-2011, 02:50 PM
There all the same but the if you have a 96-98 you need a 96-98 trans or you will have a cel light

You also can't put a DOHC clutch slave on a SOHC tranny. Other than that its good to go.

Decent price GLWS
95_S14
03-19-2011, 05:50 PM
You also can't put a DOHC clutch slave on a SOHC tranny. Other than that its good to go.

Decent price GLWS

Really I didn't know this I've had the same nismo one on both a 89 and a 96 trans and it worked great Nissan said it works for 89-98 so I'd maybe your wrong
drift freaq
03-19-2011, 06:32 PM
You also can't put a DOHC clutch slave on a SOHC tranny. Other than that its good to go.

Decent price GLWS
This is pure crap. The are exactly the same. LOL stop spreading misinformation.
johnksoy
03-19-2011, 06:40 PM
This is pure crap. The are exactly the same. LOL stop spreading misinformation.

Are you blindly saying I am lying or have you tried fitting a dohc slave on a sohc tranny.

I know because I tried fitting a DOHC slave on my sohc tranny. Also if you look it up the part numbers are different.

They are very similar. If you force the DOHC slave in it might fit, but they are not the same.
Lees_Garage
03-19-2011, 07:05 PM
I have slave here, and both a DOHC and SOHC trans here. Slave fits both.
s13-ghost
03-19-2011, 08:07 PM
^
^
lol someone got owne
johnksoy
03-19-2011, 08:46 PM
I hope you don't mind me continuing the talk about the clutch slave.

What kind of slave did you use?

All I know is the DOHC slave won't fit in the SOHC tranny. Maybe the SOHC slave will fit on the DOHC tranny.

The DOHC slave is slightly longer and the 2 bolt holes don't line up by a few mm. Since the SOHC slave is slightly smaller MAYBE it might fit on the DOHC tranny cause it ,being slightly shorter, is not going to have the effect of it being slightly longer.

So what slave did you use on both of the trannys?

I said the DOHC slave wont fit on the SOHC tranny. So if it does fit the other way around I'm technically not wrong.

Also If you did use a DOHC slave on both trannies then maybe it depends on the manufacture of the slave. Cause the one I tried, Centric, did not work.

@s13-ghost nobody got owned. Just sharing some info based on experience. If my exp. doesn't coincide with some elses 100% of the times, so be it. Then both sides will learn something.
Lees_Garage
03-19-2011, 08:49 PM
They are one and the same. If you have more questions abouth this please take it to the appropriate section of the forum. I would rather not discuss this in my for sale thread. Thank you.
Lees_Garage
03-21-2011, 03:55 PM
Bump Number One.
doridet
03-22-2011, 02:36 AM
still have the tranny?
fishyboi
03-22-2011, 07:33 PM
tranny still up for sale?
Lees_Garage
03-22-2011, 07:46 PM
Tranny is still available. I have had interest but it has not been picked up yet. Text me for best response. 909 7 8 2 0723
Lees_Garage
03-23-2011, 06:52 PM
Bump number two