S14 Parts and a couple other things

[Mister.E]

- S14 Zenki D-Max FRP Hood (unpainted, only been mounted on car once and that was to get it home) – $500 no shipping
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4414.jpg

- S15 Silvia Front and Rear Seats (damn near MINT condition, they came out of a car with less than 25,000km that had gotten into a wreck) - SOLD
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4461.jpg
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4460.jpg

- S14 DCC w/ pigtail and a few of the sensors needed for install - SOLD
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4415.jpg

- S13 DCC w/ harness and a few sensors needed for install (no bulbs, but they should be easy to source) - SOLD
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4417.jpg

- S14 Boss Hub Adapter for aftermarket steering wheel - $60 shipped
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4418.jpg

- JDM S14 Gauge Cluster w/ pigtail harness - $60 shipped
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4423.jpg

- S14 Zenki SR20DET ECU (WC) - SOLD
- S14 Zenki SR20DET Ignitor Chip - SOLD
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4424.jpg

- BNIB Greddy Profec B-Spec II Boost Controller (never used, only opened for pics) - SOLD
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4425.jpg
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4426.jpg

- JDM S14 5 speed clutch, brake, and gas pedals w/ Razo pedal covers (note that the clutch pedal does not have a bracket for the clutch switch like US cars) - SOLD
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4427.jpg

[Mister.E]

- S14 Energy Suspension Subframe Bushings (never used, only opened for pics) - SOLD
- Agency Power SS Braided Clutch Line S13 or S14 - $30 shipped
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4436.jpg

- Unknown name 80mm/3 inch test pipe - SOLD
- S14 T28 Turbo (14411-69F00) worked fine when I pulled it off of my last car - SOLD
- Possibly blown S14 T28 Turbo (14411-69F00) not sure if this is blown or not, but the plate number indicates that it’s a journal bearing turbo and can be rebuilt. If it isn’t blown then you win, if it is then it’s still fairly cheap and all it needs is a rebuild. Shaft play is minimal and the wheels spin freely - SOLD
- T28 Divided dump pipe - SOLD
- SS Earl’s oil feed line with restrictor - SOLD
- T25 (I think) inlet pipe - $20 shipped
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4438.jpg

- JDM S14 5 Lug Rear Spindles w/hubs, rotors, and calipers (came off of a Japanese car and im not sure if the brakes are the same size as the US S14) - SOLD
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4439.jpg

[Mister.E]

- Brand New Greddy Spec-LS S14 SR20DET Intercooler (discontinued by Greddy, no longer available, by far their best budget intercooler) - SOLD
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4444.jpg
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4445.jpg

- Zenki S14 SR20DET MAF - $55 + shipping
- Z32 (N62) MAF w/pigtail (screens are in perfect condition) - $115 + shipping
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4446.jpg

- Greddy Type-R BOV (may have stiff style spring, not sure. also needs the barb fitting for the vacuum source) - $135 shipped
- Greddy Type-RS BOV w/aluminum flange (has slight damage to the blue portion due to rubbing on a pipe) - SOLD
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4447.jpg
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4450.jpg

- Brand New Genuine Nissan R33 E-Brake Cables (straight bolt-in for S14 using Z32 rear brakes) - SOLD
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4455.jpg

- Z32 BM57 (17/16") Brake Master Cylinder w/3rd fitting installed and reservoir - SOLD
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4459.jpg

- S14 Bash Bar made by Forrest Wang - $100 OBO no shipping
http://i141.photobucket.com/albums/r75/jdmturbojunkie/for%20sale/IMG_4428.jpg

[dtfdanyo]

edit : pmd you

[Mister.E]

nope sorry

[speedracer601]

Tail lights shipped to 39466

[JdmGtDriver]

Mmmmmmmm the tail lights.... How much picked up??? Group deal with hood?

[Mister.E]

$220

are you in Vegas? priority goes to locals

[JdmGtDriver]

$180 and dinner at Hash House A Go Go??? ;)

[Mister.E]

no thanks, i heard that place is not so good lol

[Mister.E]

added a bash bar that i forgot to post up the first time.

subframe bushings are pending sale

[jdmspooge]

How much for the s15 rear seats shipped to san diego?

[Mister.E]

can no body that comes into this thread read? i said that i am not shipping the seats. ive already had like 5 people ask. also, in now way does my thread say that i am separating the fronts from the rears. they are being sold as a whole set.

also, unless it says im parting something out, im not parting it out. so stop asking me to separate the tail lights.

[dreimers]

Would you do $100 for the DCC and s14 bushings shipped to 60440?

[jdmspooge]

can no body that comes into this thread read? i said that i am not shipping the seats. ive already had like 5 people ask. also, in now way does my thread say that i am separating the fronts from the rears. they are being sold as a whole set.

also, unless it says im parting something out, im not parting it out. so stop asking me to separate the tail lights.

OKAY! Geez! I just thought I'd ask. I inquired about it because I have been searching for s15 rear seats for some time. It's unfortunate that you have them for sale. So relax bro! At least your thread is getting bump'd! GLWS!

[Mister.E]

Would you do $100 for the DCC and s14 bushings shipped to 60440?

sorry the bushings are already pending sale to someone else.


Also, the D-Max Tail Lights have been SOLD

[MisawaJason]

E, can you email me some pics of the S15 seats and the bash bar. I can't view the pics on this NIPR computer.

[dreimers]

sorry the bushings are already pending sale to someone else.


Also, the D-Max Tail Lights have been SOLD

What else, (if anything) would I need to do the DCC setup into a 95?

[Mister.E]

E, can you email me some pics of the S15 seats and the bash bar. I can't view the pics on this NIPR computer.

sure thing boss. i might have to do it later cuz i need to leave the office soon.

[Mister.E]

What else, (if anything) would I need to do the DCC setup into a 95?

sorry im not entirely sure, there is a really good writeup somewhere on this forum that i had seen before. the S14 DCC is actually pending sale right now.

[dreimers]

Let me know if the sale falls through, cash ready to be sent...

[MisawaJason]

sure thing boss. i might have to do it later cuz i need to leave the office soon.

Thanks for the pics E. I'm very interested in the Seats now. Have you sat in them at all? More comfortable than normal S14 seats?

[Mister.E]

errr. im not sure how the normal S14 seats feel. mine are the shitty leather ones that are cracked and ripped in every spot possible. im am sure i will still have these seats when you roll out here for FD later this year LOL

[MisawaJason]

I would really like to see them in person. I really want to get them though. Decisions decisions. $800 huh?

[MisawaJason]

The seats shall be mine E

[upsdude]

bump for some good stuff:
about the DCC; what sensors would be needed to complete the setup?

[240AZ]

I would like to take that DCC from ya shipped to 23511

[Mister.E]

which one are you guys talking about? the S14 DCC just sold, but the S13 one is still available.

S15 Seats have also been sold.

[MisawaJason]

S15 Seats have also been sold.
Hells yeah man. Big thanks!!!!!!!!

[whitenoise]

sent u a PM for the blown t28

[vboy720]

pmed for bmc.

[Mister.E]

open to offers on the items that are left

[s14canyoncity]

Free Bump for some nice ish

[Mister.E]

Will ship S14 SR20DET Greddy Intercooler Kit. Buyer pays shipping on top of the price of the item.

[sanshou2]

$15 for Agency Power SS Braided Clutch Line shipped 94806?

[Mister.E]

$15 for Agency Power SS Braided Clutch Line shipped 94806?

I'll do $20 shipped but that's the lowest. The line is $40 brand new not including shipping.

[sanshou2]

I'll do $20 shipped but that's the lowest. The line is $40 brand new not including shipping.
I'll take it, you do paypal?

[KOUKIboy]

How much for the Greddy Intercooler shipped to Phoenix AZ 85033??

[Mister.E]

How much for the Greddy Intercooler shipped to Phoenix AZ 85033??

I'll PM you a quote when i get home, i dont have the box measurements and weight with me here at work. Shouldn't be much since you are so close.

[blake110491]

Let me know if you decide to sell the s14 bash bar...

[Mister.E]

Let me know if you decide to sell the s14 bash bar...

PM me your zip code and i may just take it over to FedEx and see how much it would be.